Subversion Repositories DevTools

/******************************************************************************/
/* Legacy Linker Command File                                                 */
/* Not recommended for use in new projects.                                   */
/* Please use the device specific cmd file                                    */
/******************************************************************************/

/******************************************************************************/
/* msp430p337.cmd                                                             */
/*    - Linker Command File for defintions in the header file                 */
/*    Please do not change !                                                  */
/*                                                                            */
/******************************************************************************/


/************************************************************
* STANDARD BITS
************************************************************/
/************************************************************
* STATUS REGISTER BITS
************************************************************/
/************************************************************
* PERIPHERAL FILE MAP
************************************************************/
/************************************************************
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
************************************************************/
IE1                = 0x0000;
IFG1               = 0x0002;
IE2                = 0x0001;
IFG2               = 0x0003;
ME2                = 0x0005;
/************************************************************
* WATCHDOG TIMER
************************************************************/
WDTCTL             = 0x0120;
/************************************************************
* HARDWARE MULTIPLIER
************************************************************/
MPY                = 0x0130;
MPYS               = 0x0132;
MAC                = 0x0134;
MACS               = 0x0136;
OP2                = 0x0138;
RESLO              = 0x013A;
RESHI              = 0x013C;
SUMEXT             = 0x013E;
/************************************************************
* DIGITAL I/O PORT0
************************************************************/
P0IN               = 0x0010;
P0OUT              = 0x0011;
P0DIR              = 0x0012;
P0IFG              = 0x0013;
P0IES              = 0x0014;
P0IE               = 0x0015;
/************************************************************
* DIGITAL I/O Port1/2
************************************************************/
P1IN               = 0x0020;
P1OUT              = 0x0021;
P1DIR              = 0x0022;
P1IFG              = 0x0023;
P1IES              = 0x0024;
P1IE               = 0x0025;
P1SEL              = 0x0026;
P2IN               = 0x0028;
P2OUT              = 0x0029;
P2DIR              = 0x002A;
P2IFG              = 0x002B;
P2IES              = 0x002C;
P2IE               = 0x002D;
P2SEL              = 0x002E;
/************************************************************
* DIGITAL I/O Port3/4
************************************************************/
P3IN               = 0x0018;
P3OUT              = 0x0019;
P3DIR              = 0x001A;
P3SEL              = 0x001B;
P4IN               = 0x001C;
P4OUT              = 0x001D;
P4DIR              = 0x001E;
P4SEL              = 0x001F;
/************************************************************
* BASIC TIMER
************************************************************/
BTCTL              = 0x0040;
BTCNT1             = 0x0046;
BTCNT2             = 0x0047;
/************************************************************
* SYSTEM CLOCK GENERATOR
************************************************************/
SCFI0              = 0x0050;
SCFI1              = 0x0051;
SCFQCTL            = 0x0052;
CBCTL              = 0x0053;
/************************************************************
* LCD REGISTER
************************************************************/
LCDCTL             = 0x0030;
LCDM1              = 0x0031;
LCDM2              = 0x0032;
LCDM3              = 0x0033;
LCDM4              = 0x0034;
LCDM5              = 0x0035;
LCDM6              = 0x0036;
LCDM7              = 0x0037;
LCDM8              = 0x0038;
LCDM9              = 0x0039;
LCDM10             = 0x003A;
LCDM11             = 0x003B;
LCDM12             = 0x003C;
LCDM13             = 0x003D;
LCDM14             = 0x003E;
LCDM15             = 0x003F;
/************************************************************
* USART
************************************************************/
UCTL               = 0x0070;
UTCTL              = 0x0071;
URCTL              = 0x0072;
UMCTL              = 0x0073;
UBR0               = 0x0074;
UBR1               = 0x0075;
RXBUF              = 0x0076;
TXBUF              = 0x0077;
/************************************************************
* Timer A5
************************************************************/
TAIV               = 0x012E;
TACTL              = 0x0160;
TACCTL0            = 0x0162;
TACCTL1            = 0x0164;
TACCTL2            = 0x0166;
TACCTL3            = 0x0168;
TACCTL4            = 0x016A;
TAR                = 0x0170;
TACCR0             = 0x0172;
TACCR1             = 0x0174;
TACCR2             = 0x0176;
TACCR3             = 0x0178;
TACCR4             = 0x017A;
/************************************************************
* 8BIT TIMER/COUNTER
************************************************************/
TCCTL              = 0x0042;
TCPLD              = 0x0043;
TCDAT              = 0x0044;
/************************************************************
* TIMER/PORT
************************************************************/
TPCTL              = 0x004B;
TPCNT1             = 0x004C;
TPCNT2             = 0x004D;
TPD                = 0x004E;
TPE                = 0x004F;
/* Source select of clock input coded with Bits 6-7 in TPE
   NOTE: If the control bit B16 in TPD is set, TPSSEL2/3
         are 'don't care' and the clock source of counter
         TPCNT2 is the same as of the counter TPCNT1. */
/************************************************************
* EPROM CONTROL
************************************************************/
EPCTL              = 0x0054;
/************************************************************
* Interrupt Vectors (offset from 0xFFE0)
************************************************************/
/************************************************************
* End of Modules
************************************************************/