Blame | Last modification | View Log | RSS feed
/******************************************************************************//* Legacy Header File *//* Not recommended for use in new projects. *//* Please use the msp430.h file or the device specific header file *//******************************************************************************//********************************************************************** Standard register and bit definitions for the Texas Instruments* MSP430 microcontroller.** This file supports assembler and C development for* MSP430x31x devices.** Texas Instruments, Version 2.2** Rev. 1.1, Changed definition of LPM4 bits (device effect not changed)* Corrected LPMx_EXIT to reference new intrinsic _bic_SR_register_on_exit* The file contents were reordered* Rev. 1.2, Enclose all #define statements with parentheses* Rev. 1.3, Added sfrb for TCDAT and TCPLD* Rev. 1.4, Removed incorrect label 'BTRESET'* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers* Rev. 2.2, Removed definitions for BTRESET*********************************************************************/#ifndef __msp430x31x#define __msp430x31x#ifdef __cplusplusextern "C" {#endif/*----------------------------------------------------------------------------*//* PERIPHERAL FILE MAP *//*----------------------------------------------------------------------------*//* External references resolved by a device-specific linker command file */#define SFR_8BIT(address) extern volatile unsigned char address#define SFR_16BIT(address) extern volatile unsigned int address/************************************************************* STANDARD BITS************************************************************/#define BIT0 (0x0001)#define BIT1 (0x0002)#define BIT2 (0x0004)#define BIT3 (0x0008)#define BIT4 (0x0010)#define BIT5 (0x0020)#define BIT6 (0x0040)#define BIT7 (0x0080)#define BIT8 (0x0100)#define BIT9 (0x0200)#define BITA (0x0400)#define BITB (0x0800)#define BITC (0x1000)#define BITD (0x2000)#define BITE (0x4000)#define BITF (0x8000)/************************************************************* STATUS REGISTER BITS************************************************************/#define C (0x0001)#define Z (0x0002)#define N (0x0004)#define V (0x0100)#define GIE (0x0008)#define CPUOFF (0x0010)#define OSCOFF (0x0020)#define SCG0 (0x0040)#define SCG1 (0x0080)/* Low Power Modes coded with Bits 4-7 in SR */#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define LPM0 (CPUOFF)#define LPM1 (SCG0+CPUOFF)#define LPM2 (SCG1+CPUOFF)#define LPM3 (SCG1+SCG0+CPUOFF)#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)/* End #defines for assembler */#else /* Begin #defines for C */#define LPM0_bits (CPUOFF)#define LPM1_bits (SCG0+CPUOFF)#define LPM2_bits (SCG1+CPUOFF)#define LPM3_bits (SCG1+SCG0+CPUOFF)#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)#include "in430.h"#define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */#define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */#define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */#define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */#define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */#define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */#define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */#define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */#define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */#define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */#endif /* End #defines for C *//************************************************************* PERIPHERAL FILE MAP************************************************************//************************************************************* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS************************************************************/SFR_8BIT(IE1); /* Interrupt Enable 1 */#define WDTIE (0x01)#define OFIE (0x02)#define P0IE_0 (0x04)#define P0IE_1 (0x08)SFR_8BIT(IFG1); /* Interrupt Flag 1 */#define WDTIFG (0x01)#define OFIFG (0x02)#define P0IFG_0 (0x04)#define P0IFG_1 (0x08)#define NMIIFG (0x10)SFR_8BIT(IE2); /* Interrupt Enable 2 */#define TPIE (0x04)#define BTIE (0x80)SFR_8BIT(IFG2); /* Interrupt Flag 2 */#define BTIFG (0x80)/************************************************************* WATCHDOG TIMER************************************************************/#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */SFR_16BIT(WDTCTL); /* Watchdog Timer Control *//* The bit names have been prefixed with "WDT" */#define WDTIS0 (0x0001)#define WDTIS1 (0x0002)#define WDTSSEL (0x0004)#define WDTCNTCL (0x0008)#define WDTTMSEL (0x0010)#define WDTNMI (0x0020)#define WDTNMIES (0x0040)#define WDTHOLD (0x0080)#define WDTPW (0x5A00)/* WDT-interval times [1ms] coded with Bits 0-2 *//* WDT is clocked by fSMCLK (assumed 1MHz) */#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " *//* WDT is clocked by fACLK (assumed 32KHz) */#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " *//* Watchdog mode -> reset after expired time *//* WDT is clocked by fSMCLK (assumed 1MHz) */#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " *//* WDT is clocked by fACLK (assumed 32KHz) */#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " *//* INTERRUPT CONTROL *//* These two bits are defined in the Special Function Registers *//* #define WDTIE 0x01 *//* #define WDTIFG 0x01 *//************************************************************* DIGITAL I/O PORT0************************************************************/#define __MSP430_HAS_PORT0__ /* Definition to show that Module is available */SFR_8BIT(P0IN); /* Port 0 Input */#define P0IN_0 (0x01)#define P0IN_1 (0x02)#define P0IN_2 (0x04)#define P0IN_3 (0x08)#define P0IN_4 (0x10)#define P0IN_5 (0x20)#define P0IN_6 (0x40)#define P0IN_7 (0x80)SFR_8BIT(P0OUT); /* Port 0 Output */#define P0OUT_0 (0x01)#define P0OUT_1 (0x02)#define P0OUT_2 (0x04)#define P0OUT_3 (0x08)#define P0OUT_4 (0x10)#define P0OUT_5 (0x20)#define P0OUT_6 (0x40)#define P0OUT_7 (0x80)SFR_8BIT(P0DIR); /* Port 0 Direction */#define P0DIR_0 (0x01)#define P0DIR_1 (0x02)#define P0DIR_2 (0x04)#define P0DIR_3 (0x08)#define P0DIR_4 (0x10)#define P0DIR_5 (0x20)#define P0DIR_6 (0x40)#define P0DIR_7 (0x80)SFR_8BIT(P0IFG); /* Port 0 Interrupt Flag *//* These two bits are defined in Interrupt Flag 1 *//* #define P0IFG_0 0x01 *//* #define P0IFG_1 0x02 */#define P0IFG_2 (0x04)#define P0IFG_3 (0x08)#define P0IFG_4 (0x10)#define P0IFG_5 (0x20)#define P0IFG_6 (0x40)#define P0IFG_7 (0x80)SFR_8BIT(P0IES); /* Port 0 Interrupt Edge Select */#define P0IES_0 (0x01)#define P0IES_1 (0x02)#define P0IES_2 (0x04)#define P0IES_3 (0x08)#define P0IES_4 (0x10)#define P0IES_5 (0x20)#define P0IES_6 (0x40)#define P0IES_7 (0x80)SFR_8BIT(P0IE); /* Port 0 Interrupt Enable *//* These two bits are defined in Interrupt Enable 1 *//* #define P0IE_0 0x01 *//* #define P0IE_1 0x02 */#define P0IE_2 (0x04)#define P0IE_3 (0x08)#define P0IE_4 (0x10)#define P0IE_5 (0x20)#define P0IE_6 (0x40)#define P0IE_7 (0x80)/************************************************************* LCD REGISTER************************************************************/#define __MSP430_HAS_LCD__ /* Definition to show that Module is available */SFR_8BIT(LCDCTL); /* LCD Control *//* the names of the mode bits are different from the spec */#define LCDON (0x01)#define LCDLOWR (0x02)#define LCDSON (0x04)#define LCDMX0 (0x08)#define LCDMX1 (0x10)#define LCDP0 (0x20)#define LCDP1 (0x40)#define LCDP2 (0x80)/* Display modes coded with Bits 2-4 */#define LCDSTATIC (LCDSON)#define LCD2MUX (LCDMX0+LCDSON)#define LCD3MUX (LCDMX1+LCDSON)#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)/* Group select code with Bits 5-7 Seg.lines Dig.output */#define LCDSG0 (0x00) /* S0 - S1 O2 - O29 (default) */#define LCDSG0_1 (LCDP0) /* S0 - S5 O6 - O29 */#define LCDSG0_2 (LCDP1) /* S0 - S9 O10 - O29 */#define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */#define LCDSG0_4 (LCDP2) /* S0 - S17 O18 - O29 */#define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */#define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */#define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- *//* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND *//* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */#define LCDOG1_7 (0x00) /* S0 - S1 O2 - O29 (default) */#define LCDOG2_7 (LCDP0) /* S0 - S5 O6 - O29 */#define LCDOG3_7 (LCDP1) /* S0 - S9 O10 - O29 */#define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */#define LCDOG5_7 (LCDP2) /* S0 - S17 O18 - O29 */#define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */#define LCDOG7 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */#define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- */#define LCDMEM_ (0x0031) /* LCD Memory */#ifdef __ASM_HEADER__#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */#else#define LCDMEM ((char*) LCDMEM_) /* LCD Memory (for C) */#endifSFR_8BIT(LCDM1); /* LCD Memory 1 */SFR_8BIT(LCDM2); /* LCD Memory 2 */SFR_8BIT(LCDM3); /* LCD Memory 3 */SFR_8BIT(LCDM4); /* LCD Memory 4 */SFR_8BIT(LCDM5); /* LCD Memory 5 */SFR_8BIT(LCDM6); /* LCD Memory 6 */SFR_8BIT(LCDM7); /* LCD Memory 7 */SFR_8BIT(LCDM8); /* LCD Memory 8 */SFR_8BIT(LCDM9); /* LCD Memory 9 */SFR_8BIT(LCDM10); /* LCD Memory 10 */SFR_8BIT(LCDM11); /* LCD Memory 11 */SFR_8BIT(LCDM12); /* LCD Memory 12 */SFR_8BIT(LCDM13); /* LCD Memory 13 */SFR_8BIT(LCDM14); /* LCD Memory 14 */SFR_8BIT(LCDM15); /* LCD Memory 15 */#define LCDMA (LCDM10) /* LCD Memory A */#define LCDMB (LCDM11) /* LCD Memory B */#define LCDMC (LCDM12) /* LCD Memory C */#define LCDMD (LCDM13) /* LCD Memory D */#define LCDME (LCDM14) /* LCD Memory E */#define LCDMF (LCDM15) /* LCD Memory F *//************************************************************* BASIC TIMER************************************************************/#define __MSP430_HAS_BT__ /* Definition to show that Module is available */SFR_8BIT(BTCTL); /* Basic Timer Control *//* The bit names have been prefixed with "BT" */#define BTIP0 (0x01)#define BTIP1 (0x02)#define BTIP2 (0x04)#define BTFRFQ0 (0x08)#define BTFRFQ1 (0x10)#define BTDIV (0x20) /* fCLK2 = ACLK:256 */#define BTHOLD (0x40) /* BT1 is held if this bit is set */#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */SFR_8BIT(BTCNT1); /* Basic Timer Count 1 */SFR_8BIT(BTCNT2); /* Basic Timer Count 2 *//* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */#define BT_fCLK2_ACLK (0x00)#define BT_fCLK2_ACLK_DIV256 (BTDIV)#define BT_fCLK2_MCLK (BTSSEL)/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 *//* Frequency of LCD coded with Bits 3-4 */#define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */#define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */#define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */#define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 *//* LCD frequency values with fBT=fACLK */#define BT_fLCD_1K (0x00) /* fACLK:32 (default) */#define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */#define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */#define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 *//* LCD frequency values with fBT=fMCLK */#define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */#define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */#define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 *//* with assumed vlues of fACLK=32KHz, fMCLK=1MHz *//* fBT=fACLK is thought for longer interval times */#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */#define BT_ADLY_1 (BTIP2) /* 1ms " */#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */#define BT_ADLY_16 (BTDIV) /* 16ms " */#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " *//* fCLK2=fMCLK (1MHz) is thought for short interval times *//* the timing for short intervals is more precise than ACLK *//* NOTE *//* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz *//* Too low interval time results in interrupts too frequent for the processor to handle! */#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " *//* Reset/Hold coded with Bits 6-7 in BT(1)CTL *//* this is for BT *///#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set *///#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set *//* this is for BT1 */#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set *//* INTERRUPT CONTROL BITS *//* #define BTIE 0x80 *//* #define BTIFG 0x80 *//************************************************************* SYSTEM CLOCK GENERATOR************************************************************/#define __MSP430_HAS_FLL__ /* Definition to show that Module is available */SFR_8BIT(SCFI0); /* System Clock Frequency Integrator 0 */#define FN_2 (0x04)#define FN_3 (0x08)#define FN_4 (0x10)SFR_8BIT(SCFI1); /* System Clock Frequency Integrator 1 */SFR_8BIT(SCFQCTL); /* System Clock Frequency Control *//* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL *//* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from *//* #define SCFQ_64K 0x01 fMCLK=2*fACLK 3+1 to 127+1 is possible */#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK not possible for ICE */SFR_8BIT(CBCTL); /* Crystal Buffer Control *** WRITE-ONLY *** */#define CBE (0x01)#define CBSEL0 (0x02)#define CBSEL1 (0x04)/* Source select of frequency at output pin XBUF coded with Bits 1-2 in CBCTL */#define CBSEL_ACLK (0x00) /* source is ACLK (default after POR) */#define CBSEL_ACLK_DIV2 (CBSEL0) /* source is ACLK/2 */#define CBSEL_ACLK_DIV4 (CBSEL1) /* source is ACLK/4 */#define CBSEL_MCLK (CBSEL1+CBSEL0) /* source is MCLK *//* INTERRUPT CONTROL BITS *//* These two bits are defined in the Special Function Registers *//* #define OFIFG 0x02 *//* #define OFIE 0x02 *//************************************************************* 8BIT TIMER/COUNTER************************************************************/#define __MSP430_HAS_8BTC__ /* Definition to show that Module is available */SFR_8BIT(TCCTL); /* Timer/Counter Control *//* The bit names have been prefixed with "TC" */#define TCRXD (0x01)#define TCTXD (0x02)#define TCRXACT (0x04)#define TCENCNT (0x08)#define TCTXE (0x10)#define TCISCTL (0x20)#define TCSSEL0 (0x40)#define TCSSEL1 (0x80)/* Source select of clock input coded with Bits 6-7 */#define TCSSEL_P01 (0x00) /* source is signal at pin P0.1 (default) */#define TCSSEL_ACLK (TCSSEL0) /* source is ACLK */#define TCSSEL_MCLK (TCSSEL1) /* source is MCLK */#define TCSSEL_P01_MCLK (TCSSEL1+TCSSEL0) /* source is signal pin P0.1 .AND. MCLK */SFR_8BIT(TCPLD); /* Timer/Counter Preload */SFR_8BIT(TCDAT); /* Timer/Counter Data *//************************************************************* TIMER/PORT************************************************************/#define __MSP430_HAS_TP__ /* Definition to show that Module is available */SFR_8BIT(TPCTL); /* Timer/Port Control */#define EN1FG (0x01)#define RC1FG (0x02)#define RC2FG (0x04)#define EN1 (0x08)#define ENA (0x10)#define ENB (0x20)#define TPSSEL0 (0x40)#define TPSSEL1 (0x80)/* The EN1 signal of TPCNT1 is coded with with Bits 3-5 in TPCTL */#define TPCNT1_EN_OFF (0x00) /* TPCNT1 is disabled */#define TPCNT1_EN_ON (ENA) /* " is enabled */#define TPCNT1_EN_nTPIN5 (ENB) /* " is enabled with ~TPIN.5 */#define TPCNT1_EN_TPIN5 (TPSSEL0+ENB) /* " is enabled with TPIN.5 */#define TPCNT1_EN_nCIN (ENB+ENA) /* " is enabled with ~CIN */#define TPCNT1_EN_CIN (TPSSEL0+ENB+ENA) /* " is enabled with CIN *//* Source select of clock input coded with Bits 6-7 in TPCTL */#define TPSSEL_CLK1_CIN (0x00) /* CLK1 source is signal at CIN (default) */#define TPSSEL_CLK1_ACLK (TPSSEL0) /* CLK1 source is ACLK */#define TPSSEL_CLK1_MCLK (TPSSEL1) /* CLK1 source is MCLK *//* DATA REGISTER ADDRESSES */SFR_8BIT(TPCNT1); /* Timer/Port Counter 1 */SFR_8BIT(TPCNT2); /* Timer/Port Counter 2 */SFR_8BIT(TPD); /* Timer/Port Data */#define TPD_0 (0x01)#define TPD_1 (0x02)#define TPD_2 (0x04)#define TPD_3 (0x08)#define TPD_4 (0x10)#define TPD_5 (0x20)#define CPON (0x40)#define B16 (0x80)SFR_8BIT(TPE); /* Timer/Port Enable */#define TPE_0 (0x01)#define TPE_1 (0x02)#define TPE_2 (0x04)#define TPE_3 (0x08)#define TPE_4 (0x10)#define TPE_5 (0x20)#define TPSSEL2 (0x40)#define TPSSEL3 (0x80)/* Source select of clock input coded with Bits 6-7 in TPENOTE: If the control bit B16 in TPD is set, TPSSEL2/3are 'don't care' and the clock source of counterTPCNT2 is the same as of the counter TPCNT1. */#define TPSSEL_CLK2_TPIN5 (0x00) /* CLK2 source is signal TPIN.5 (default) */#define TPSSEL_CLK2_ACLK (TPSSEL2) /* CLK2 source is ACLK */#define TPSSEL_CLK2_MCLK (TPSSEL3) /* CLK2 source is MCLK */#define TPSSEL_CLK2_OFF (TPSSEL3+TPSSEL2)/* CLK2 source is disabled *//************************************************************* EPROM CONTROL************************************************************/#define __MSP430_HAS_EPROM__ /* Definition to show that Module is available */SFR_8BIT(EPCTL); /* EPROM Control */#define EPEXE (0x01)#define EPVPPS (0x02)/************************************************************* Interrupt Vectors (offset from 0xFFE0)************************************************************/#define VECTOR_NAME(name) name##_ptr#define EMIT_PRAGMA(x) _Pragma(#x)#define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name#define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section))#define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \PLACE_VECTOR(VECTOR_NAME(func), offset)#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define PORT0_VECTOR ".int00" /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */#else#define PORT0_VECTOR (0 * 1u) /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] *//*#define PORT0_ISR(func) ISR_VECTOR(func, ".int00") */ /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define BASICTIMER_VECTOR ".int01" /* 0xFFE2 Basic Timer */#else#define BASICTIMER_VECTOR (1 * 1u) /* 0xFFE2 Basic Timer *//*#define BASICTIMER_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Basic Timer */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define TIMERPORT_VECTOR ".int05" /* 0xFFE8 Timer/Port */#else#define TIMERPORT_VECTOR (5 * 1u) /* 0xFFE8 Timer/Port *//*#define TIMERPORT_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFE8 Timer/Port */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */#else#define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer *//*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define IO1_VECTOR ".int12" /* 0xFFF8 Dedicated IO (P0.1) */#else#define IO1_VECTOR (12 * 1u) /* 0xFFF8 Dedicated IO (P0.1) *//*#define IO1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Dedicated IO (P0.1) */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define IO0_VECTOR ".int13" /* 0xFFFA Dedicated IO (P0.0) */#else#define IO0_VECTOR (13 * 1u) /* 0xFFFA Dedicated IO (P0.0) *//*#define IO0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Dedicated IO (P0.0) */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */#else#define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable *//*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */#else#define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] *//*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */#endif/************************************************************* End of Modules************************************************************/#ifdef __cplusplus}#endif /* extern "C" */#endif /* #ifndef __msp430x31x */