Blame | Last modification | View Log | RSS feed
/******************************************************************************//* Legacy Header File *//* Not recommended for use in new projects. *//* Please use the msp430.h file or the device specific header file *//******************************************************************************//********************************************************************** Standard register and bit definitions for the Texas Instruments* MSP430 microcontroller.** This file supports assembler and C development for* MSP430x14x1 devices.** Texas Instruments, Version 2.3** Rev. 1.2, Additional Timer B bit definitions.* Renamed XTOFF to XT2OFF.* Rev. 1.3, Removed leading 0 to aviod interpretation as octal* values under C* Rev. 1.4, Corrected LPMx_EXIT to reference new intrinsic _bic_SR_register_on_exit* Changed TAIV and TBIV to be read-only* Rev. 1.5, Enclose all #define statements with parentheses* Rev. 1.6, Defined vectors for USART (in addition to UART)* Rev. 1.7, Added USART special function labels (UxME, UxIE, UxIFG)* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers* Rev. 2.2, Removed unused def of TASSEL2 / TBSSEL2* Rev. 2.3, added definitions for Interrupt Vectors xxIV*********************************************************************/#ifndef __msp430x14x1#define __msp430x14x1#ifdef __cplusplusextern "C" {#endif/*----------------------------------------------------------------------------*//* PERIPHERAL FILE MAP *//*----------------------------------------------------------------------------*//* External references resolved by a device-specific linker command file */#define SFR_8BIT(address) extern volatile unsigned char address#define SFR_16BIT(address) extern volatile unsigned int address/************************************************************* STANDARD BITS************************************************************/#define BIT0 (0x0001)#define BIT1 (0x0002)#define BIT2 (0x0004)#define BIT3 (0x0008)#define BIT4 (0x0010)#define BIT5 (0x0020)#define BIT6 (0x0040)#define BIT7 (0x0080)#define BIT8 (0x0100)#define BIT9 (0x0200)#define BITA (0x0400)#define BITB (0x0800)#define BITC (0x1000)#define BITD (0x2000)#define BITE (0x4000)#define BITF (0x8000)/************************************************************* STATUS REGISTER BITS************************************************************/#define C (0x0001)#define Z (0x0002)#define N (0x0004)#define V (0x0100)#define GIE (0x0008)#define CPUOFF (0x0010)#define OSCOFF (0x0020)#define SCG0 (0x0040)#define SCG1 (0x0080)/* Low Power Modes coded with Bits 4-7 in SR */#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define LPM0 (CPUOFF)#define LPM1 (SCG0+CPUOFF)#define LPM2 (SCG1+CPUOFF)#define LPM3 (SCG1+SCG0+CPUOFF)#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)/* End #defines for assembler */#else /* Begin #defines for C */#define LPM0_bits (CPUOFF)#define LPM1_bits (SCG0+CPUOFF)#define LPM2_bits (SCG1+CPUOFF)#define LPM3_bits (SCG1+SCG0+CPUOFF)#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)#include "in430.h"#define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */#define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */#define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */#define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */#define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */#define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */#define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */#define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */#define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */#define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */#endif /* End #defines for C *//************************************************************* PERIPHERAL FILE MAP************************************************************//************************************************************* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS************************************************************/SFR_8BIT(IE1); /* Interrupt Enable 1 */#define U0IE IE1 /* UART0 Interrupt Enable Register */#define WDTIE (0x01)#define OFIE (0x02)#define NMIIE (0x10)#define ACCVIE (0x20)#define URXIE0 (0x40)#define UTXIE0 (0x80)SFR_8BIT(IFG1); /* Interrupt Flag 1 */#define U0IFG IFG1 /* UART0 Interrupt Flag Register */#define WDTIFG (0x01)#define OFIFG (0x02)#define NMIIFG (0x10)#define URXIFG0 (0x40)#define UTXIFG0 (0x80)SFR_8BIT(ME1); /* Module Enable 1 */#define U0ME ME1 /* UART0 Module Enable Register */#define URXE0 (0x40)#define UTXE0 (0x80)#define USPIE0 (0x40)SFR_8BIT(IE2); /* Interrupt Enable 2 */#define U1IE IE2 /* UART1 Interrupt Enable Register */#define URXIE1 (0x10)#define UTXIE1 (0x20)SFR_8BIT(IFG2); /* Interrupt Flag 2 */#define U1IFG IFG2 /* UART1 Interrupt Flag Register */#define URXIFG1 (0x10)#define UTXIFG1 (0x20)SFR_8BIT(ME2); /* Module Enable 2 */#define U1ME ME2 /* UART1 Module Enable Register */#define URXE1 (0x10)#define UTXE1 (0x20)#define USPIE1 (0x10)/************************************************************* WATCHDOG TIMER************************************************************/#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */SFR_16BIT(WDTCTL); /* Watchdog Timer Control *//* The bit names have been prefixed with "WDT" */#define WDTIS0 (0x0001)#define WDTIS1 (0x0002)#define WDTSSEL (0x0004)#define WDTCNTCL (0x0008)#define WDTTMSEL (0x0010)#define WDTNMI (0x0020)#define WDTNMIES (0x0040)#define WDTHOLD (0x0080)#define WDTPW (0x5A00)/* WDT-interval times [1ms] coded with Bits 0-2 *//* WDT is clocked by fSMCLK (assumed 1MHz) */#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " *//* WDT is clocked by fACLK (assumed 32KHz) */#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " *//* Watchdog mode -> reset after expired time *//* WDT is clocked by fSMCLK (assumed 1MHz) */#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " *//* WDT is clocked by fACLK (assumed 32KHz) */#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " *//* INTERRUPT CONTROL *//* These two bits are defined in the Special Function Registers *//* #define WDTIE 0x01 *//* #define WDTIFG 0x01 *//************************************************************* HARDWARE MULTIPLIER************************************************************/#define __MSP430_HAS_MPY__ /* Definition to show that Module is available */SFR_16BIT(MPY); /* Multiply Unsigned/Operand 1 */SFR_16BIT(MPYS); /* Multiply Signed/Operand 1 */SFR_16BIT(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */SFR_16BIT(MACS); /* Multiply Signed and Accumulate/Operand 1 */SFR_16BIT(OP2); /* Operand 2 */SFR_16BIT(RESLO); /* Result Low Word */SFR_16BIT(RESHI); /* Result High Word */SFR_16BIT(SUMEXT); /* Sum Extend *//************************************************************* DIGITAL I/O Port1/2************************************************************/#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */SFR_8BIT(P1IN); /* Port 1 Input */SFR_8BIT(P1OUT); /* Port 1 Output */SFR_8BIT(P1DIR); /* Port 1 Direction */SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */SFR_8BIT(P1SEL); /* Port 1 Selection */SFR_8BIT(P2IN); /* Port 2 Input */SFR_8BIT(P2OUT); /* Port 2 Output */SFR_8BIT(P2DIR); /* Port 2 Direction */SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */SFR_8BIT(P2SEL); /* Port 2 Selection *//************************************************************* DIGITAL I/O Port3/4************************************************************/#define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */#define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */SFR_8BIT(P3IN); /* Port 3 Input */SFR_8BIT(P3OUT); /* Port 3 Output */SFR_8BIT(P3DIR); /* Port 3 Direction */SFR_8BIT(P3SEL); /* Port 3 Selection */SFR_8BIT(P4IN); /* Port 4 Input */SFR_8BIT(P4OUT); /* Port 4 Output */SFR_8BIT(P4DIR); /* Port 4 Direction */SFR_8BIT(P4SEL); /* Port 4 Selection *//************************************************************* DIGITAL I/O Port5/6************************************************************/#define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */#define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */SFR_8BIT(P5IN); /* Port 5 Input */SFR_8BIT(P5OUT); /* Port 5 Output */SFR_8BIT(P5DIR); /* Port 5 Direction */SFR_8BIT(P5SEL); /* Port 5 Selection */SFR_8BIT(P6IN); /* Port 6 Input */SFR_8BIT(P6OUT); /* Port 6 Output */SFR_8BIT(P6DIR); /* Port 6 Direction */SFR_8BIT(P6SEL); /* Port 6 Selection *//************************************************************* USART************************************************************//* UxCTL */#define PENA (0x80) /* Parity enable */#define PEV (0x40) /* Parity 0:odd / 1:even */#define SPB (0x20) /* Stop Bits 0:one / 1: two */#define CHAR (0x10) /* Data 0:7-bits / 1:8-bits */#define LISTEN (0x08) /* Listen mode */#define SYNC (0x04) /* UART / SPI mode */#define MM (0x02) /* Master Mode off/on */#define SWRST (0x01) /* USART Software Reset *//* UxTCTL */#define CKPH (0x80) /* SPI: Clock Phase */#define CKPL (0x40) /* Clock Polarity */#define SSEL1 (0x20) /* Clock Source Select 1 */#define SSEL0 (0x10) /* Clock Source Select 0 */#define URXSE (0x08) /* Receive Start edge select */#define TXWAKE (0x04) /* TX Wake up mode */#define STC (0x02) /* SPI: STC enable 0:on / 1:off */#define TXEPT (0x01) /* TX Buffer empty *//* UxRCTL */#define FE (0x80) /* Frame Error */#define PE (0x40) /* Parity Error */#define OE (0x20) /* Overrun Error */#define BRK (0x10) /* Break detected */#define URXEIE (0x08) /* RX Error interrupt enable */#define URXWIE (0x04) /* RX Wake up interrupt enable */#define RXWAKE (0x02) /* RX Wake up detect */#define RXERR (0x01) /* RX Error Error *//************************************************************* USART 0************************************************************/#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */SFR_8BIT(U0CTL); /* USART 0 Control */SFR_8BIT(U0TCTL); /* USART 0 Transmit Control */SFR_8BIT(U0RCTL); /* USART 0 Receive Control */SFR_8BIT(U0MCTL); /* USART 0 Modulation Control */SFR_8BIT(U0BR0); /* USART 0 Baud Rate 0 */SFR_8BIT(U0BR1); /* USART 0 Baud Rate 1 */SFR_8BIT(U0RXBUF); /* USART 0 Receive Buffer */SFR_8BIT(U0TXBUF); /* USART 0 Transmit Buffer *//* Alternate register names */#define UCTL0 U0CTL /* USART 0 Control */#define UTCTL0 U0TCTL /* USART 0 Transmit Control */#define URCTL0 U0RCTL /* USART 0 Receive Control */#define UMCTL0 U0MCTL /* USART 0 Modulation Control */#define UBR00 U0BR0 /* USART 0 Baud Rate 0 */#define UBR10 U0BR1 /* USART 0 Baud Rate 1 */#define RXBUF0 U0RXBUF /* USART 0 Receive Buffer */#define TXBUF0 U0TXBUF /* USART 0 Transmit Buffer */#define UCTL0_ U0CTL_ /* USART 0 Control */#define UTCTL0_ U0TCTL_ /* USART 0 Transmit Control */#define URCTL0_ U0RCTL_ /* USART 0 Receive Control */#define UMCTL0_ U0MCTL_ /* USART 0 Modulation Control */#define UBR00_ U0BR0_ /* USART 0 Baud Rate 0 */#define UBR10_ U0BR1_ /* USART 0 Baud Rate 1 */#define RXBUF0_ U0RXBUF_ /* USART 0 Receive Buffer */#define TXBUF0_ U0TXBUF_ /* USART 0 Transmit Buffer */#define UCTL_0 U0CTL /* USART 0 Control */#define UTCTL_0 U0TCTL /* USART 0 Transmit Control */#define URCTL_0 U0RCTL /* USART 0 Receive Control */#define UMCTL_0 U0MCTL /* USART 0 Modulation Control */#define UBR0_0 U0BR0 /* USART 0 Baud Rate 0 */#define UBR1_0 U0BR1 /* USART 0 Baud Rate 1 */#define RXBUF_0 U0RXBUF /* USART 0 Receive Buffer */#define TXBUF_0 U0TXBUF /* USART 0 Transmit Buffer */#define UCTL_0_ U0CTL_ /* USART 0 Control */#define UTCTL_0_ U0TCTL_ /* USART 0 Transmit Control */#define URCTL_0_ U0RCTL_ /* USART 0 Receive Control */#define UMCTL_0_ U0MCTL_ /* USART 0 Modulation Control */#define UBR0_0_ U0BR0_ /* USART 0 Baud Rate 0 */#define UBR1_0_ U0BR1_ /* USART 0 Baud Rate 1 */#define RXBUF_0_ U0RXBUF_ /* USART 0 Receive Buffer */#define TXBUF_0_ U0TXBUF_ /* USART 0 Transmit Buffer *//************************************************************* USART 1************************************************************/#define __MSP430_HAS_UART1__ /* Definition to show that Module is available */SFR_8BIT(U1CTL); /* USART 1 Control */SFR_8BIT(U1TCTL); /* USART 1 Transmit Control */SFR_8BIT(U1RCTL); /* USART 1 Receive Control */SFR_8BIT(U1MCTL); /* USART 1 Modulation Control */SFR_8BIT(U1BR0); /* USART 1 Baud Rate 0 */SFR_8BIT(U1BR1); /* USART 1 Baud Rate 1 */SFR_8BIT(U1RXBUF); /* USART 1 Receive Buffer */SFR_8BIT(U1TXBUF); /* USART 1 Transmit Buffer *//* Alternate register names */#define UCTL1 U1CTL /* USART 1 Control */#define UTCTL1 U1TCTL /* USART 1 Transmit Control */#define URCTL1 U1RCTL /* USART 1 Receive Control */#define UMCTL1 U1MCTL /* USART 1 Modulation Control */#define UBR01 U1BR0 /* USART 1 Baud Rate 0 */#define UBR11 U1BR1 /* USART 1 Baud Rate 1 */#define RXBUF1 U1RXBUF /* USART 1 Receive Buffer */#define TXBUF1 U1TXBUF /* USART 1 Transmit Buffer */#define UCTL1_ U1CTL_ /* USART 1 Control */#define UTCTL1_ U1TCTL_ /* USART 1 Transmit Control */#define URCTL1_ U1RCTL_ /* USART 1 Receive Control */#define UMCTL1_ U1MCTL_ /* USART 1 Modulation Control */#define UBR01_ U1BR0_ /* USART 1 Baud Rate 0 */#define UBR11_ U1BR1_ /* USART 1 Baud Rate 1 */#define RXBUF1_ U1RXBUF_ /* USART 1 Receive Buffer */#define TXBUF1_ U1TXBUF_ /* USART 1 Transmit Buffer */#define UCTL_1 U1CTL /* USART 1 Control */#define UTCTL_1 U1TCTL /* USART 1 Transmit Control */#define URCTL_1 U1RCTL /* USART 1 Receive Control */#define UMCTL_1 U1MCTL /* USART 1 Modulation Control */#define UBR0_1 U1BR0 /* USART 1 Baud Rate 0 */#define UBR1_1 U1BR1 /* USART 1 Baud Rate 1 */#define RXBUF_1 U1RXBUF /* USART 1 Receive Buffer */#define TXBUF_1 U1TXBUF /* USART 1 Transmit Buffer */#define UCTL_1_ U1CTL_ /* USART 1 Control */#define UTCTL_1_ U1TCTL_ /* USART 1 Transmit Control */#define URCTL_1_ U1RCTL_ /* USART 1 Receive Control */#define UMCTL_1_ U1MCTL_ /* USART 1 Modulation Control */#define UBR0_1_ U1BR0_ /* USART 1 Baud Rate 0 */#define UBR1_1_ U1BR1_ /* USART 1 Baud Rate 1 */#define RXBUF_1_ U1RXBUF_ /* USART 1 Receive Buffer */#define TXBUF_1_ U1TXBUF_ /* USART 1 Transmit Buffer *//************************************************************* Timer A3************************************************************/#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */SFR_16BIT(TACTL); /* Timer A Control */SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */SFR_16BIT(TAR); /* Timer A Counter Register */SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 *//* Alternate register names */#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 *//* Alternate register names - 5xx style */#define TA0IV TAIV /* Timer A Interrupt Vector Word */#define TA0CTL TACTL /* Timer A Control */#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */#define TA0R TAR /* Timer A Counter Register */#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */#define TA0CTL_ TACTL_ /* Timer A Control */#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */#define TA0R_ TAR_ /* Timer A Counter Register */#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */#define TASSEL1 (0x0200) /* Timer A clock source select 0 */#define TASSEL0 (0x0100) /* Timer A clock source select 1 */#define ID1 (0x0080) /* Timer A clock input divider 1 */#define ID0 (0x0040) /* Timer A clock input divider 0 */#define MC1 (0x0020) /* Timer A mode control 1 */#define MC0 (0x0010) /* Timer A mode control 0 */#define TACLR (0x0004) /* Timer A counter clear */#define TAIE (0x0002) /* Timer A counter interrupt enable */#define TAIFG (0x0001) /* Timer A counter interrupt flag */#define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */#define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */#define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */#define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */#define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */#define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */#define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */#define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */#define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */#define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */#define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */#define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */#define CM1 (0x8000) /* Capture mode 1 */#define CM0 (0x4000) /* Capture mode 0 */#define CCIS1 (0x2000) /* Capture input select 1 */#define CCIS0 (0x1000) /* Capture input select 0 */#define SCS (0x0800) /* Capture sychronize */#define SCCI (0x0400) /* Latched capture signal (read) */#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */#define OUTMOD2 (0x0080) /* Output mode 2 */#define OUTMOD1 (0x0040) /* Output mode 1 */#define OUTMOD0 (0x0020) /* Output mode 0 */#define CCIE (0x0010) /* Capture/compare interrupt enable */#define CCI (0x0008) /* Capture input signal (read) */#define OUT (0x0004) /* PWM Output signal if output mode 0 */#define COV (0x0002) /* Capture/compare overflow flag */#define CCIFG (0x0001) /* Capture/compare interrupt flag */#define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */#define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */#define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */#define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */#define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */#define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */#define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */#define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */#define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */#define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */#define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */#define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */#define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */#define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */#define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */#define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges *//* TA3IV Definitions */#define TAIV_NONE (0x0000) /* No Interrupt pending */#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */#define TAIV_6 (0x0006) /* Reserved */#define TAIV_8 (0x0008) /* Reserved */#define TAIV_TAIFG (0x000A) /* TAIFG *//************************************************************* Timer B7************************************************************/#define __MSP430_HAS_TB7__ /* Definition to show that Module is available */SFR_16BIT(TBIV); /* Timer B Interrupt Vector Word */SFR_16BIT(TBCTL); /* Timer B Control */SFR_16BIT(TBCCTL0); /* Timer B Capture/Compare Control 0 */SFR_16BIT(TBCCTL1); /* Timer B Capture/Compare Control 1 */SFR_16BIT(TBCCTL2); /* Timer B Capture/Compare Control 2 */SFR_16BIT(TBCCTL3); /* Timer B Capture/Compare Control 3 */SFR_16BIT(TBCCTL4); /* Timer B Capture/Compare Control 4 */SFR_16BIT(TBCCTL5); /* Timer B Capture/Compare Control 5 */SFR_16BIT(TBCCTL6); /* Timer B Capture/Compare Control 6 */SFR_16BIT(TBR); /* Timer B Counter Register */SFR_16BIT(TBCCR0); /* Timer B Capture/Compare 0 */SFR_16BIT(TBCCR1); /* Timer B Capture/Compare 1 */SFR_16BIT(TBCCR2); /* Timer B Capture/Compare 2 */SFR_16BIT(TBCCR3); /* Timer B Capture/Compare 3 */SFR_16BIT(TBCCR4); /* Timer B Capture/Compare 4 */SFR_16BIT(TBCCR5); /* Timer B Capture/Compare 5 */SFR_16BIT(TBCCR6); /* Timer B Capture/Compare 6 *//* Alternate register names - 5xx style */#define TB0IV TBIV /* Timer B Interrupt Vector Word */#define TB0CTL TBCTL /* Timer B Control */#define TB0CCTL0 TBCCTL0 /* Timer B Capture/Compare Control 0 */#define TB0CCTL1 TBCCTL1 /* Timer B Capture/Compare Control 1 */#define TB0CCTL2 TBCCTL2 /* Timer B Capture/Compare Control 2 */#define TB0CCTL3 TBCCTL3 /* Timer B Capture/Compare Control 3 */#define TB0CCTL4 TBCCTL4 /* Timer B Capture/Compare Control 4 */#define TB0CCTL5 TBCCTL5 /* Timer B Capture/Compare Control 5 */#define TB0CCTL6 TBCCTL6 /* Timer B Capture/Compare Control 6 */#define TB0R TBR /* Timer B Counter Register */#define TB0CCR0 TBCCR0 /* Timer B Capture/Compare 0 */#define TB0CCR1 TBCCR1 /* Timer B Capture/Compare 1 */#define TB0CCR2 TBCCR2 /* Timer B Capture/Compare 2 */#define TB0CCR3 TBCCR3 /* Timer B Capture/Compare 3 */#define TB0CCR4 TBCCR4 /* Timer B Capture/Compare 4 */#define TB0CCR5 TBCCR5 /* Timer B Capture/Compare 5 */#define TB0CCR6 TBCCR6 /* Timer B Capture/Compare 6 */#define TB0IV_ TBIV_ /* Timer B Interrupt Vector Word */#define TB0CTL_ TBCTL_ /* Timer B Control */#define TB0CCTL0_ TBCCTL0_ /* Timer B Capture/Compare Control 0 */#define TB0CCTL1_ TBCCTL1_ /* Timer B Capture/Compare Control 1 */#define TB0CCTL2_ TBCCTL2_ /* Timer B Capture/Compare Control 2 */#define TB0CCTL3_ TBCCTL3_ /* Timer B Capture/Compare Control 3 */#define TB0CCTL4_ TBCCTL4_ /* Timer B Capture/Compare Control 4 */#define TB0CCTL5_ TBCCTL5_ /* Timer B Capture/Compare Control 5 */#define TB0CCTL6_ TBCCTL6_ /* Timer B Capture/Compare Control 6 */#define TB0R_ TBR_ /* Timer B Counter Register */#define TB0CCR0_ TBCCR0_ /* Timer B Capture/Compare 0 */#define TB0CCR1_ TBCCR1_ /* Timer B Capture/Compare 1 */#define TB0CCR2_ TBCCR2_ /* Timer B Capture/Compare 2 */#define TB0CCR3_ TBCCR3_ /* Timer B Capture/Compare 3 */#define TB0CCR4_ TBCCR4_ /* Timer B Capture/Compare 4 */#define TB0CCR5_ TBCCR5_ /* Timer B Capture/Compare 5 */#define TB0CCR6_ TBCCR6_ /* Timer B Capture/Compare 6 */#define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */#define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */#define CNTL1 (0x1000) /* Counter lenght 1 */#define CNTL0 (0x0800) /* Counter lenght 0 */#define TBSSEL1 (0x0200) /* Clock source 1 */#define TBSSEL0 (0x0100) /* Clock source 0 */#define TBCLR (0x0004) /* Timer B counter clear */#define TBIE (0x0002) /* Timer B interrupt enable */#define TBIFG (0x0001) /* Timer B interrupt flag */#define SHR1 (0x4000) /* Timer B Compare latch load group 1 */#define SHR0 (0x2000) /* Timer B Compare latch load group 0 */#define TBSSEL_0 (0*0x0100u) /* Clock Source: TBCLK */#define TBSSEL_1 (1*0x0100u) /* Clock Source: ACLK */#define TBSSEL_2 (2*0x0100u) /* Clock Source: SMCLK */#define TBSSEL_3 (3*0x0100u) /* Clock Source: INCLK */#define CNTL_0 (0*0x0800u) /* Counter lenght: 16 bit */#define CNTL_1 (1*0x0800u) /* Counter lenght: 12 bit */#define CNTL_2 (2*0x0800u) /* Counter lenght: 10 bit */#define CNTL_3 (3*0x0800u) /* Counter lenght: 8 bit */#define SHR_0 (0*0x2000u) /* Timer B Group: 0 - individually */#define SHR_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */#define SHR_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/#define SHR_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */#define TBCLGRP_0 (0*0x2000u) /* Timer B Group: 0 - individually */#define TBCLGRP_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */#define TBCLGRP_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/#define TBCLGRP_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) *//* Additional Timer B Control Register bits are defined in Timer A */#define CLLD1 (0x0400) /* Compare latch load source 1 */#define CLLD0 (0x0200) /* Compare latch load source 0 */#define SLSHR1 (0x0400) /* Compare latch load source 1 */#define SLSHR0 (0x0200) /* Compare latch load source 0 */#define SLSHR_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */#define SLSHR_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */#define SLSHR_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */#define SLSHR_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */#define CLLD_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */#define CLLD_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */#define CLLD_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */#define CLLD_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 *//* TB7IV Definitions */#define TBIV_NONE (0x0000) /* No Interrupt pending */#define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */#define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */#define TBIV_TBCCR3 (0x0006) /* TBCCR3_CCIFG */#define TBIV_TBCCR4 (0x0008) /* TBCCR4_CCIFG */#define TBIV_TBCCR5 (0x000A) /* TBCCR3_CCIFG */#define TBIV_TBCCR6 (0x000C) /* TBCCR4_CCIFG */#define TBIV_TBIFG (0x000E) /* TBIFG *//************************************************************* Basic Clock Module************************************************************/#define __MSP430_HAS_BASIC_CLOCK__ /* Definition to show that Module is available */SFR_8BIT(DCOCTL); /* DCO Clock Frequency Control */SFR_8BIT(BCSCTL1); /* Basic Clock System Control 1 */SFR_8BIT(BCSCTL2); /* Basic Clock System Control 2 */#define MOD0 (0x01) /* Modulation Bit 0 */#define MOD1 (0x02) /* Modulation Bit 1 */#define MOD2 (0x04) /* Modulation Bit 2 */#define MOD3 (0x08) /* Modulation Bit 3 */#define MOD4 (0x10) /* Modulation Bit 4 */#define DCO0 (0x20) /* DCO Select Bit 0 */#define DCO1 (0x40) /* DCO Select Bit 1 */#define DCO2 (0x80) /* DCO Select Bit 2 */#define RSEL0 (0x01) /* Range Select Bit 0 */#define RSEL1 (0x02) /* Range Select Bit 1 */#define RSEL2 (0x04) /* Range Select Bit 2 */#define XT5V (0x08) /* XT5V should always be reset */#define DIVA0 (0x10) /* ACLK Divider 0 */#define DIVA1 (0x20) /* ACLK Divider 1 */#define XTS (0x40) /* LFXTCLK 0:Low Freq. / 1: High Freq. */#define XT2OFF (0x80) /* Enable XT2CLK */#define DIVA_0 (0x00) /* ACLK Divider 0: /1 */#define DIVA_1 (0x10) /* ACLK Divider 1: /2 */#define DIVA_2 (0x20) /* ACLK Divider 2: /4 */#define DIVA_3 (0x30) /* ACLK Divider 3: /8 */#define DCOR (0x01) /* Enable External Resistor : 1 */#define DIVS0 (0x02) /* SMCLK Divider 0 */#define DIVS1 (0x04) /* SMCLK Divider 1 */#define SELS (0x08) /* SMCLK Source Select 0:DCOCLK / 1:XT2CLK/LFXTCLK */#define DIVM0 (0x10) /* MCLK Divider 0 */#define DIVM1 (0x20) /* MCLK Divider 1 */#define SELM0 (0x40) /* MCLK Source Select 0 */#define SELM1 (0x80) /* MCLK Source Select 1 */#define DIVS_0 (0x00) /* SMCLK Divider 0: /1 */#define DIVS_1 (0x02) /* SMCLK Divider 1: /2 */#define DIVS_2 (0x04) /* SMCLK Divider 2: /4 */#define DIVS_3 (0x06) /* SMCLK Divider 3: /8 */#define DIVM_0 (0x00) /* MCLK Divider 0: /1 */#define DIVM_1 (0x10) /* MCLK Divider 1: /2 */#define DIVM_2 (0x20) /* MCLK Divider 2: /4 */#define DIVM_3 (0x30) /* MCLK Divider 3: /8 */#define SELM_0 (0x00) /* MCLK Source Select 0: DCOCLK */#define SELM_1 (0x40) /* MCLK Source Select 1: DCOCLK */#define SELM_2 (0x80) /* MCLK Source Select 2: XT2CLK/LFXTCLK */#define SELM_3 (0xC0) /* MCLK Source Select 3: LFXTCLK *//************************************************************** Flash Memory*************************************************************/#define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */SFR_16BIT(FCTL1); /* FLASH Control 1 */SFR_16BIT(FCTL2); /* FLASH Control 2 */SFR_16BIT(FCTL3); /* FLASH Control 3 */#define FRKEY (0x9600) /* Flash key returned by read */#define FWKEY (0xA500) /* Flash key for write */#define FXKEY (0x3300) /* for use with XOR instruction */#define ERASE (0x0002) /* Enable bit for Flash segment erase */#define MERAS (0x0004) /* Enable bit for Flash mass erase */#define WRT (0x0040) /* Enable bit for Flash write */#define BLKWRT (0x0080) /* Enable bit for Flash segment write */#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */#ifndef FN2#define FN2 (0x0004)#endif#ifndef FN3#define FN3 (0x0008)#endif#ifndef FN4#define FN4 (0x0010)#endif#define FN5 (0x0020)#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */#define FSSEL1 (0x0080) /* Flash clock select 1 */#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */#define BUSY (0x0001) /* Flash busy: 1 */#define KEYV (0x0002) /* Flash Key violation flag */#define ACCVIFG (0x0004) /* Flash Access violation flag */#define WAIT (0x0008) /* Wait flag for segment write */#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */#define EMEX (0x0020) /* Flash Emergency Exit *//************************************************************* Comparator A************************************************************/#define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */SFR_8BIT(CACTL1); /* Comparator A Control 1 */SFR_8BIT(CACTL2); /* Comparator A Control 2 */SFR_8BIT(CAPD); /* Comparator A Port Disable */#define CAIFG (0x01) /* Comp. A Interrupt Flag */#define CAIE (0x02) /* Comp. A Interrupt Enable */#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */#define CAON (0x08) /* Comp. A enable */#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */#define CARSEL (0x40) /* Comp. A Internal Reference Enable */#define CAEX (0x80) /* Comp. A Exchange Inputs */#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/#define CAOUT (0x01) /* Comp. A Output */#define CAF (0x02) /* Comp. A Enable Output Filter */#define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */#define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */#define CACTL24 (0x10)#define CACTL25 (0x20)#define CACTL26 (0x40)#define CACTL27 (0x80)#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 *//************************************************************* Interrupt Vectors (offset from 0xFFE0)************************************************************/#define VECTOR_NAME(name) name##_ptr#define EMIT_PRAGMA(x) _Pragma(#x)#define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name#define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section))#define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \PLACE_VECTOR(VECTOR_NAME(func), offset)#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define PORT2_VECTOR ".int01" /* 0xFFE2 Port 2 */#else#define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 *//*#define PORT2_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Port 2 */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define USART1TX_VECTOR ".int02" /* 0xFFE4 USART 1 Transmit */#else#define USART1TX_VECTOR (2 * 1u) /* 0xFFE4 USART 1 Transmit *//*#define USART1TX_ISR(func) ISR_VECTOR(func, ".int02") */ /* 0xFFE4 USART 1 Transmit */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define USART1RX_VECTOR ".int03" /* 0xFFE6 USART 1 Receive */#else#define USART1RX_VECTOR (3 * 1u) /* 0xFFE6 USART 1 Receive *//*#define USART1RX_ISR(func) ISR_VECTOR(func, ".int03") */ /* 0xFFE6 USART 1 Receive */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define PORT1_VECTOR ".int04" /* 0xFFE8 Port 1 */#else#define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 *//*#define PORT1_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Port 1 */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define TIMERA1_VECTOR ".int05" /* 0xFFEA Timer A CC1-2, TA */#else#define TIMERA1_VECTOR (5 * 1u) /* 0xFFEA Timer A CC1-2, TA *//*#define TIMERA1_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFEA Timer A CC1-2, TA */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define TIMERA0_VECTOR ".int06" /* 0xFFEC Timer A CC0 */#else#define TIMERA0_VECTOR (6 * 1u) /* 0xFFEC Timer A CC0 *//*#define TIMERA0_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC Timer A CC0 */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define USART0TX_VECTOR ".int08" /* 0xFFF0 USART 0 Transmit */#else#define USART0TX_VECTOR (8 * 1u) /* 0xFFF0 USART 0 Transmit *//*#define USART0TX_ISR(func) ISR_VECTOR(func, ".int08") */ /* 0xFFF0 USART 0 Transmit */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define USART0RX_VECTOR ".int09" /* 0xFFF2 USART 0 Receive */#else#define USART0RX_VECTOR (9 * 1u) /* 0xFFF2 USART 0 Receive *//*#define USART0RX_ISR(func) ISR_VECTOR(func, ".int09") */ /* 0xFFF2 USART 0 Receive */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */#else#define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer *//*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define COMPARATORA_VECTOR ".int11" /* 0xFFF6 Comparator A */#else#define COMPARATORA_VECTOR (11 * 1u) /* 0xFFF6 Comparator A *//*#define COMPARATORA_ISR(func) ISR_VECTOR(func, ".int11") */ /* 0xFFF6 Comparator A */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define TIMERB1_VECTOR ".int12" /* 0xFFF8 Timer B CC1-6, TB */#else#define TIMERB1_VECTOR (12 * 1u) /* 0xFFF8 Timer B CC1-6, TB *//*#define TIMERB1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Timer B CC1-6, TB */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define TIMERB0_VECTOR ".int13" /* 0xFFFA Timer B CC0 */#else#define TIMERB0_VECTOR (13 * 1u) /* 0xFFFA Timer B CC0 *//*#define TIMERB0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Timer B CC0 */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */#else#define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable *//*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */#endif#ifdef __ASM_HEADER__ /* Begin #defines for assembler */#define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */#else#define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] *//*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */#endif/************************************************************* End of Modules************************************************************/#ifdef __cplusplus}#endif /* extern "C" */#endif /* #ifndef __msp430x14x1 */