| 2850 |
dpurdie |
1 |
/******************************************************************************/
|
|
|
2 |
/* Legacy Header File */
|
|
|
3 |
/* Not recommended for use in new projects. */
|
|
|
4 |
/* Please use the msp430.h file or the device specific header file */
|
|
|
5 |
/******************************************************************************/
|
|
|
6 |
|
|
|
7 |
/********************************************************************
|
|
|
8 |
*
|
|
|
9 |
* Standard register and bit definitions for the Texas Instruments
|
|
|
10 |
* MSP430 microcontroller.
|
|
|
11 |
*
|
|
|
12 |
* This file supports assembler and C development for
|
|
|
13 |
* MSP430x47x devices.
|
|
|
14 |
*
|
|
|
15 |
* Texas Instruments, Version 1.1
|
|
|
16 |
*
|
|
|
17 |
* Rev. 1.0, First Release
|
|
|
18 |
* Rev. 1.1, Corrected OSCCAP settings
|
|
|
19 |
*
|
|
|
20 |
********************************************************************/
|
|
|
21 |
|
|
|
22 |
#ifndef __msp430x47x
|
|
|
23 |
#define __msp430x47x
|
|
|
24 |
|
|
|
25 |
#ifdef __cplusplus
|
|
|
26 |
extern "C" {
|
|
|
27 |
#endif
|
|
|
28 |
|
|
|
29 |
|
|
|
30 |
/*----------------------------------------------------------------------------*/
|
|
|
31 |
/* PERIPHERAL FILE MAP */
|
|
|
32 |
/*----------------------------------------------------------------------------*/
|
|
|
33 |
|
|
|
34 |
/* External references resolved by a device-specific linker command file */
|
|
|
35 |
#define SFR_8BIT(address) extern volatile unsigned char address
|
|
|
36 |
#define SFR_16BIT(address) extern volatile unsigned int address
|
|
|
37 |
|
|
|
38 |
|
|
|
39 |
/************************************************************
|
|
|
40 |
* STANDARD BITS
|
|
|
41 |
************************************************************/
|
|
|
42 |
|
|
|
43 |
#define BIT0 (0x0001)
|
|
|
44 |
#define BIT1 (0x0002)
|
|
|
45 |
#define BIT2 (0x0004)
|
|
|
46 |
#define BIT3 (0x0008)
|
|
|
47 |
#define BIT4 (0x0010)
|
|
|
48 |
#define BIT5 (0x0020)
|
|
|
49 |
#define BIT6 (0x0040)
|
|
|
50 |
#define BIT7 (0x0080)
|
|
|
51 |
#define BIT8 (0x0100)
|
|
|
52 |
#define BIT9 (0x0200)
|
|
|
53 |
#define BITA (0x0400)
|
|
|
54 |
#define BITB (0x0800)
|
|
|
55 |
#define BITC (0x1000)
|
|
|
56 |
#define BITD (0x2000)
|
|
|
57 |
#define BITE (0x4000)
|
|
|
58 |
#define BITF (0x8000)
|
|
|
59 |
|
|
|
60 |
/************************************************************
|
|
|
61 |
* STATUS REGISTER BITS
|
|
|
62 |
************************************************************/
|
|
|
63 |
|
|
|
64 |
#define C (0x0001)
|
|
|
65 |
#define Z (0x0002)
|
|
|
66 |
#define N (0x0004)
|
|
|
67 |
#define V (0x0100)
|
|
|
68 |
#define GIE (0x0008)
|
|
|
69 |
#define CPUOFF (0x0010)
|
|
|
70 |
#define OSCOFF (0x0020)
|
|
|
71 |
#define SCG0 (0x0040)
|
|
|
72 |
#define SCG1 (0x0080)
|
|
|
73 |
|
|
|
74 |
/* Low Power Modes coded with Bits 4-7 in SR */
|
|
|
75 |
|
|
|
76 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
77 |
#define LPM0 (CPUOFF)
|
|
|
78 |
#define LPM1 (SCG0+CPUOFF)
|
|
|
79 |
#define LPM2 (SCG1+CPUOFF)
|
|
|
80 |
#define LPM3 (SCG1+SCG0+CPUOFF)
|
|
|
81 |
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
|
|
|
82 |
/* End #defines for assembler */
|
|
|
83 |
|
|
|
84 |
#else /* Begin #defines for C */
|
|
|
85 |
#define LPM0_bits (CPUOFF)
|
|
|
86 |
#define LPM1_bits (SCG0+CPUOFF)
|
|
|
87 |
#define LPM2_bits (SCG1+CPUOFF)
|
|
|
88 |
#define LPM3_bits (SCG1+SCG0+CPUOFF)
|
|
|
89 |
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
|
|
|
90 |
|
|
|
91 |
#include "in430.h"
|
|
|
92 |
|
|
|
93 |
#define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */
|
|
|
94 |
#define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */
|
|
|
95 |
#define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */
|
|
|
96 |
#define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */
|
|
|
97 |
#define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */
|
|
|
98 |
#define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */
|
|
|
99 |
#define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */
|
|
|
100 |
#define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */
|
|
|
101 |
#define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */
|
|
|
102 |
#define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */
|
|
|
103 |
#endif /* End #defines for C */
|
|
|
104 |
|
|
|
105 |
/************************************************************
|
|
|
106 |
* PERIPHERAL FILE MAP
|
|
|
107 |
************************************************************/
|
|
|
108 |
|
|
|
109 |
/************************************************************
|
|
|
110 |
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
|
|
|
111 |
************************************************************/
|
|
|
112 |
|
|
|
113 |
SFR_8BIT(IE1); /* Interrupt Enable 1 */
|
|
|
114 |
#define WDTIE (0x01)
|
|
|
115 |
#define OFIE (0x02)
|
|
|
116 |
#define NMIIE (0x10)
|
|
|
117 |
#define ACCVIE (0x20)
|
|
|
118 |
|
|
|
119 |
SFR_8BIT(IFG1); /* Interrupt Flag 1 */
|
|
|
120 |
#define WDTIFG (0x01)
|
|
|
121 |
#define OFIFG (0x02)
|
|
|
122 |
#define PORIFG (0x04)
|
|
|
123 |
#define RSTIFG (0x08)
|
|
|
124 |
#define NMIIFG (0x10)
|
|
|
125 |
|
|
|
126 |
SFR_8BIT(IE2); /* Interrupt Enable 2 */
|
|
|
127 |
#define U1IE IE2 /* UART1 Interrupt Enable Register */
|
|
|
128 |
#define UC0IE IE2
|
|
|
129 |
#define UCA0RXIE (0x01)
|
|
|
130 |
#define UCA0TXIE (0x02)
|
|
|
131 |
#define UCB0RXIE (0x04)
|
|
|
132 |
#define UCB0TXIE (0x08)
|
|
|
133 |
#define BTIE (0x80)
|
|
|
134 |
|
|
|
135 |
SFR_8BIT(IFG2); /* Interrupt Flag 2 */
|
|
|
136 |
#define U1IFG IFG2 /* UART1 Interrupt Flag Register */
|
|
|
137 |
#define UC0IFG IFG2
|
|
|
138 |
#define UCA0RXIFG (0x01)
|
|
|
139 |
#define UCA0TXIFG (0x02)
|
|
|
140 |
#define UCB0RXIFG (0x04)
|
|
|
141 |
#define UCB0TXIFG (0x08)
|
|
|
142 |
#define BTIFG (0x80)
|
|
|
143 |
|
|
|
144 |
/************************************************************
|
|
|
145 |
* BASIC TIMER with Real Time Clock
|
|
|
146 |
************************************************************/
|
|
|
147 |
#define __MSP430_HAS_BT_RTC__ /* Definition to show that Module is available */
|
|
|
148 |
|
|
|
149 |
SFR_8BIT(BTCTL); /* Basic Timer Control */
|
|
|
150 |
SFR_8BIT(RTCCTL); /* Real Time Clock Control */
|
|
|
151 |
SFR_8BIT(RTCNT1); /* Real Time Counter 1 */
|
|
|
152 |
SFR_8BIT(RTCNT2); /* Real Time Counter 2 */
|
|
|
153 |
SFR_8BIT(RTCNT3); /* Real Time Counter 3 */
|
|
|
154 |
SFR_8BIT(RTCNT4); /* Real Time Counter 4 */
|
|
|
155 |
SFR_8BIT(BTCNT1); /* Basic Timer Count 1 */
|
|
|
156 |
SFR_8BIT(BTCNT2); /* Basic Timer Count 2 */
|
|
|
157 |
SFR_8BIT(RTCDAY); /* Real Time Clock Day */
|
|
|
158 |
SFR_8BIT(RTCMON); /* Real Time Clock Month */
|
|
|
159 |
SFR_8BIT(RTCYEARL); /* Real Time Clock Year (Low Byte) */
|
|
|
160 |
SFR_8BIT(RTCYEARH); /* Real Time Clock Year (High Byte) */
|
|
|
161 |
#define RTCSEC RTCNT1
|
|
|
162 |
#define RTCMIN RTCNT2
|
|
|
163 |
#define RTCHOUR RTCNT3
|
|
|
164 |
#define RTCDOW RTCNT4
|
|
|
165 |
|
|
|
166 |
SFR_16BIT(RTCTL); /* Basic/Real Timer Control */
|
|
|
167 |
SFR_16BIT(RTCTIM0); /* Real Time Clock Time 0 */
|
|
|
168 |
SFR_16BIT(RTCTIM1); /* Real Time Clock Time 1 */
|
|
|
169 |
SFR_16BIT(BTCNT12); /* Basic Timer Count 1/2 */
|
|
|
170 |
SFR_16BIT(RTCDATE); /* Real Time Clock Date */
|
|
|
171 |
SFR_16BIT(RTCYEAR); /* Real Time Clock Year */
|
|
|
172 |
#define RTCNT12 RTCTIM0
|
|
|
173 |
#define RTCNT34 RTCTIM1
|
|
|
174 |
|
|
|
175 |
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
|
|
|
176 |
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
|
|
|
177 |
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
|
|
|
178 |
//#define res (0x10)
|
|
|
179 |
//#define res (0x08)
|
|
|
180 |
#define BTIP2 (0x04)
|
|
|
181 |
#define BTIP1 (0x02)
|
|
|
182 |
#define BTIP0 (0x01)
|
|
|
183 |
|
|
|
184 |
#define RTCBCD (0x80) /* RTC BCD Select */
|
|
|
185 |
#define RTCHOLD (0x40) /* RTC Hold */
|
|
|
186 |
#define RTCMODE1 (0x20) /* RTC Mode 1 */
|
|
|
187 |
#define RTCMODE0 (0x10) /* RTC Mode 0 */
|
|
|
188 |
#define RTCTEV1 (0x08) /* RTC Time Event 1 */
|
|
|
189 |
#define RTCTEV0 (0x04) /* RTC Time Event 0 */
|
|
|
190 |
#define RTCIE (0x02) /* RTC Interrupt Enable */
|
|
|
191 |
#define RTCFG (0x01) /* RTC Event Flag */
|
|
|
192 |
|
|
|
193 |
#define RTCTEV_0 (0x00) /* RTC Time Event: 0 */
|
|
|
194 |
#define RTCTEV_1 (0x04) /* RTC Time Event: 1 */
|
|
|
195 |
#define RTCTEV_2 (0x08) /* RTC Time Event: 2 */
|
|
|
196 |
#define RTCTEV_3 (0x0C) /* RTC Time Event: 3 */
|
|
|
197 |
#define RTCMODE_0 (0x00) /* RTC Mode: 0 */
|
|
|
198 |
#define RTCMODE_1 (0x10) /* RTC Mode: 1 */
|
|
|
199 |
#define RTCMODE_2 (0x20) /* RTC Mode: 2 */
|
|
|
200 |
#define RTCMODE_3 (0x30) /* RTC Mode: 3 */
|
|
|
201 |
|
|
|
202 |
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
|
|
|
203 |
#define BT_fCLK2_ACLK (0x00)
|
|
|
204 |
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
|
|
|
205 |
#define BT_fCLK2_MCLK (BTSSEL)
|
|
|
206 |
|
|
|
207 |
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
|
|
|
208 |
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
|
|
|
209 |
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
|
|
|
210 |
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
|
|
|
211 |
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
|
|
|
212 |
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
|
|
|
213 |
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
|
|
|
214 |
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
|
|
|
215 |
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
|
|
|
216 |
|
|
|
217 |
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
|
|
|
218 |
/* fBT=fACLK is thought for longer interval times */
|
|
|
219 |
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
|
|
|
220 |
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
|
|
|
221 |
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
|
|
|
222 |
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
|
|
|
223 |
#define BT_ADLY_1 (BTIP2) /* 1ms " */
|
|
|
224 |
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
|
|
|
225 |
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
|
|
|
226 |
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
|
|
|
227 |
#define BT_ADLY_16 (BTDIV) /* 16ms " */
|
|
|
228 |
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
|
|
|
229 |
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
|
|
|
230 |
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
|
|
|
231 |
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
|
|
|
232 |
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
|
|
|
233 |
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
|
|
|
234 |
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
|
|
|
235 |
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
|
|
|
236 |
/* the timing for short intervals is more precise than ACLK */
|
|
|
237 |
/* NOTE */
|
|
|
238 |
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
|
|
|
239 |
/* Too low interval time results in interrupts too frequent for the processor to handle! */
|
|
|
240 |
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
|
|
|
241 |
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
|
|
|
242 |
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
|
|
|
243 |
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
|
|
|
244 |
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
|
|
|
245 |
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
|
|
|
246 |
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
|
|
|
247 |
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
|
|
|
248 |
|
|
|
249 |
/* Hold coded with Bits 6-7 in BT(1)CTL */
|
|
|
250 |
/* this is for BT */
|
|
|
251 |
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
|
|
|
252 |
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
|
|
|
253 |
|
|
|
254 |
/* INTERRUPT CONTROL BITS */
|
|
|
255 |
/* #define BTIE 0x80 */
|
|
|
256 |
/* #define BTIFG 0x80 */
|
|
|
257 |
|
|
|
258 |
/************************************************************
|
|
|
259 |
* Comparator A
|
|
|
260 |
************************************************************/
|
|
|
261 |
#define __MSP430_HAS_COMPA__ /* Definition to show that Module is available */
|
|
|
262 |
|
|
|
263 |
SFR_8BIT(CACTL1); /* Comparator A Control 1 */
|
|
|
264 |
SFR_8BIT(CACTL2); /* Comparator A Control 2 */
|
|
|
265 |
SFR_8BIT(CAPD); /* Comparator A Port Disable */
|
|
|
266 |
|
|
|
267 |
#define CAIFG (0x01) /* Comp. A Interrupt Flag */
|
|
|
268 |
#define CAIE (0x02) /* Comp. A Interrupt Enable */
|
|
|
269 |
#define CAIES (0x04) /* Comp. A Int. Edge Select: 0:rising / 1:falling */
|
|
|
270 |
#define CAON (0x08) /* Comp. A enable */
|
|
|
271 |
#define CAREF0 (0x10) /* Comp. A Internal Reference Select 0 */
|
|
|
272 |
#define CAREF1 (0x20) /* Comp. A Internal Reference Select 1 */
|
|
|
273 |
#define CARSEL (0x40) /* Comp. A Internal Reference Enable */
|
|
|
274 |
#define CAEX (0x80) /* Comp. A Exchange Inputs */
|
|
|
275 |
|
|
|
276 |
#define CAREF_0 (0x00) /* Comp. A Int. Ref. Select 0 : Off */
|
|
|
277 |
#define CAREF_1 (0x10) /* Comp. A Int. Ref. Select 1 : 0.25*Vcc */
|
|
|
278 |
#define CAREF_2 (0x20) /* Comp. A Int. Ref. Select 2 : 0.5*Vcc */
|
|
|
279 |
#define CAREF_3 (0x30) /* Comp. A Int. Ref. Select 3 : Vt*/
|
|
|
280 |
|
|
|
281 |
#define CAOUT (0x01) /* Comp. A Output */
|
|
|
282 |
#define CAF (0x02) /* Comp. A Enable Output Filter */
|
|
|
283 |
#define P2CA0 (0x04) /* Comp. A Connect External Signal to CA0 : 1 */
|
|
|
284 |
#define P2CA1 (0x08) /* Comp. A Connect External Signal to CA1 : 1 */
|
|
|
285 |
#define CACTL24 (0x10)
|
|
|
286 |
#define CACTL25 (0x20)
|
|
|
287 |
#define CACTL26 (0x40)
|
|
|
288 |
#define CACTL27 (0x80)
|
|
|
289 |
|
|
|
290 |
#define CAPD0 (0x01) /* Comp. A Disable Input Buffer of Port Register .0 */
|
|
|
291 |
#define CAPD1 (0x02) /* Comp. A Disable Input Buffer of Port Register .1 */
|
|
|
292 |
#define CAPD2 (0x04) /* Comp. A Disable Input Buffer of Port Register .2 */
|
|
|
293 |
#define CAPD3 (0x08) /* Comp. A Disable Input Buffer of Port Register .3 */
|
|
|
294 |
#define CAPD4 (0x10) /* Comp. A Disable Input Buffer of Port Register .4 */
|
|
|
295 |
#define CAPD5 (0x20) /* Comp. A Disable Input Buffer of Port Register .5 */
|
|
|
296 |
#define CAPD6 (0x40) /* Comp. A Disable Input Buffer of Port Register .6 */
|
|
|
297 |
#define CAPD7 (0x80) /* Comp. A Disable Input Buffer of Port Register .7 */
|
|
|
298 |
|
|
|
299 |
/************************************************************
|
|
|
300 |
* DAC12
|
|
|
301 |
************************************************************/
|
|
|
302 |
#define __MSP430_HAS_DAC12_2__ /* Definition to show that Module is available */
|
|
|
303 |
|
|
|
304 |
SFR_16BIT(DAC12_0CTL); /* DAC12_0 Control */
|
|
|
305 |
SFR_16BIT(DAC12_1CTL); /* DAC12_1 Control */
|
|
|
306 |
|
|
|
307 |
#define DAC12GRP (0x0001) /* DAC12 group */
|
|
|
308 |
#define DAC12ENC (0x0002) /* DAC12 enable conversion */
|
|
|
309 |
#define DAC12IFG (0x0004) /* DAC12 interrupt flag */
|
|
|
310 |
#define DAC12IE (0x0008) /* DAC12 interrupt enable */
|
|
|
311 |
#define DAC12DF (0x0010) /* DAC12 data format */
|
|
|
312 |
#define DAC12AMP0 (0x0020) /* DAC12 amplifier bit 0 */
|
|
|
313 |
#define DAC12AMP1 (0x0040) /* DAC12 amplifier bit 1 */
|
|
|
314 |
#define DAC12AMP2 (0x0080) /* DAC12 amplifier bit 2 */
|
|
|
315 |
#define DAC12IR (0x0100) /* DAC12 input reference and output range */
|
|
|
316 |
#define DAC12CALON (0x0200) /* DAC12 calibration */
|
|
|
317 |
#define DAC12LSEL0 (0x0400) /* DAC12 load select bit 0 */
|
|
|
318 |
#define DAC12LSEL1 (0x0800) /* DAC12 load select bit 1 */
|
|
|
319 |
#define DAC12RES (0x1000) /* DAC12 resolution */
|
|
|
320 |
#define DAC12SREF0 (0x2000) /* DAC12 reference bit 0 */
|
|
|
321 |
#define DAC12SREF1 (0x4000) /* DAC12 reference bit 1 */
|
|
|
322 |
#define DAC12OPS (0x8000) /* DAC12 Operation Amp. */
|
|
|
323 |
|
|
|
324 |
#define DAC12AMP_0 (0*0x0020u) /* DAC12 amplifier 0: off, 3-state */
|
|
|
325 |
#define DAC12AMP_1 (1*0x0020u) /* DAC12 amplifier 1: off, off */
|
|
|
326 |
#define DAC12AMP_2 (2*0x0020u) /* DAC12 amplifier 2: low, low */
|
|
|
327 |
#define DAC12AMP_3 (3*0x0020u) /* DAC12 amplifier 3: low, medium */
|
|
|
328 |
#define DAC12AMP_4 (4*0x0020u) /* DAC12 amplifier 4: low, high */
|
|
|
329 |
#define DAC12AMP_5 (5*0x0020u) /* DAC12 amplifier 5: medium, medium */
|
|
|
330 |
#define DAC12AMP_6 (6*0x0020u) /* DAC12 amplifier 6: medium, high */
|
|
|
331 |
#define DAC12AMP_7 (7*0x0020u) /* DAC12 amplifier 7: high, high */
|
|
|
332 |
|
|
|
333 |
#define DAC12LSEL_0 (0*0x0400u) /* DAC12 load select 0: direct */
|
|
|
334 |
#define DAC12LSEL_1 (1*0x0400u) /* DAC12 load select 1: latched with DAT */
|
|
|
335 |
#define DAC12LSEL_2 (2*0x0400u) /* DAC12 load select 2: latched with pos. Timer_A3.OUT1 */
|
|
|
336 |
#define DAC12LSEL_3 (3*0x0400u) /* DAC12 load select 3: latched with pos. Timer_B7.OUT1 */
|
|
|
337 |
|
|
|
338 |
#define DAC12SREF_0 (0*0x2000u) /* DAC12 reference 0: Vref+ */
|
|
|
339 |
#define DAC12SREF_1 (1*0x2000u) /* DAC12 reference 1: Vref+ */
|
|
|
340 |
#define DAC12SREF_2 (2*0x2000u) /* DAC12 reference 2: Veref+ */
|
|
|
341 |
#define DAC12SREF_3 (3*0x2000u) /* DAC12 reference 3: Veref+ */
|
|
|
342 |
|
|
|
343 |
SFR_16BIT(DAC12_0DAT); /* DAC12_0 Data */
|
|
|
344 |
SFR_16BIT(DAC12_1DAT); /* DAC12_1 Data */
|
|
|
345 |
/*************************************************************
|
|
|
346 |
* Flash Memory
|
|
|
347 |
*************************************************************/
|
|
|
348 |
#define __MSP430_HAS_FLASH2__ /* Definition to show that Module is available */
|
|
|
349 |
|
|
|
350 |
SFR_16BIT(FCTL1); /* FLASH Control 1 */
|
|
|
351 |
SFR_16BIT(FCTL2); /* FLASH Control 2 */
|
|
|
352 |
SFR_16BIT(FCTL3); /* FLASH Control 3 */
|
|
|
353 |
SFR_16BIT(FCTL4); /* FLASH Control 4 */
|
|
|
354 |
|
|
|
355 |
#define FRKEY (0x9600) /* Flash key returned by read */
|
|
|
356 |
#define FWKEY (0xA500) /* Flash key for write */
|
|
|
357 |
#define FXKEY (0x3300) /* for use with XOR instruction */
|
|
|
358 |
|
|
|
359 |
#define ERASE (0x0002) /* Enable bit for Flash segment erase */
|
|
|
360 |
#define MERAS (0x0004) /* Enable bit for Flash mass erase */
|
|
|
361 |
#define EEI (0x0008) /* Enable Erase Interrupts */
|
|
|
362 |
#define EEIEX (0x0010) /* Enable Emergency Interrupt Exit */
|
|
|
363 |
#define WRT (0x0040) /* Enable bit for Flash write */
|
|
|
364 |
#define BLKWRT (0x0080) /* Enable bit for Flash segment write */
|
|
|
365 |
#define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */
|
|
|
366 |
|
|
|
367 |
#define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */
|
|
|
368 |
#define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */
|
|
|
369 |
#ifndef FN2
|
|
|
370 |
#define FN2 (0x0004)
|
|
|
371 |
#endif
|
|
|
372 |
#ifndef FN3
|
|
|
373 |
#define FN3 (0x0008)
|
|
|
374 |
#endif
|
|
|
375 |
#ifndef FN4
|
|
|
376 |
#define FN4 (0x0010)
|
|
|
377 |
#endif
|
|
|
378 |
#define FN5 (0x0020)
|
|
|
379 |
#define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */
|
|
|
380 |
#define FSSEL1 (0x0080) /* Flash clock select 1 */
|
|
|
381 |
|
|
|
382 |
#define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */
|
|
|
383 |
#define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */
|
|
|
384 |
#define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */
|
|
|
385 |
#define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */
|
|
|
386 |
|
|
|
387 |
#define BUSY (0x0001) /* Flash busy: 1 */
|
|
|
388 |
#define KEYV (0x0002) /* Flash Key violation flag */
|
|
|
389 |
#define ACCVIFG (0x0004) /* Flash Access violation flag */
|
|
|
390 |
#define WAIT (0x0008) /* Wait flag for segment write */
|
|
|
391 |
#define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */
|
|
|
392 |
#define EMEX (0x0020) /* Flash Emergency Exit */
|
|
|
393 |
#define LOCKA (0x0040) /* Segment A Lock bit: read = 1 - Segment is locked (read only) */
|
|
|
394 |
#define FAIL (0x0080) /* Last Program or Erase failed */
|
|
|
395 |
|
|
|
396 |
#define MGR0 (0x0010) /* Marginal read 0 mode. */
|
|
|
397 |
#define MGR1 (0x0020) /* Marginal read 1 mode. */
|
|
|
398 |
|
|
|
399 |
/************************************************************
|
|
|
400 |
* SYSTEM CLOCK, FLL+
|
|
|
401 |
************************************************************/
|
|
|
402 |
#define __MSP430_HAS_FLLPLUS__ /* Definition to show that Module is available */
|
|
|
403 |
|
|
|
404 |
SFR_8BIT(SCFI0); /* System Clock Frequency Integrator 0 */
|
|
|
405 |
#define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/
|
|
|
406 |
#define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/
|
|
|
407 |
#define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/
|
|
|
408 |
#define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/
|
|
|
409 |
#define FLLD0 (0x40) /* Loop Divider Bit : 0 */
|
|
|
410 |
#define FLLD1 (0x80) /* Loop Divider Bit : 1 */
|
|
|
411 |
|
|
|
412 |
#define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */
|
|
|
413 |
#define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */
|
|
|
414 |
#define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */
|
|
|
415 |
#define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */
|
|
|
416 |
|
|
|
417 |
SFR_8BIT(SCFI1); /* System Clock Frequency Integrator 1 */
|
|
|
418 |
SFR_8BIT(SCFQCTL); /* System Clock Frequency Control */
|
|
|
419 |
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
|
|
|
420 |
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
|
|
|
421 |
#define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */
|
|
|
422 |
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
|
|
|
423 |
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
|
|
|
424 |
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
|
|
|
425 |
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
|
|
|
426 |
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
|
|
|
427 |
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */
|
|
|
428 |
#define SCFQ_M (0x80) /* Modulation Disable */
|
|
|
429 |
|
|
|
430 |
SFR_8BIT(FLL_CTL0); /* FLL+ Control 0 */
|
|
|
431 |
#define DCOF (0x01) /* DCO Fault Flag */
|
|
|
432 |
#define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */
|
|
|
433 |
#define XT1OF (0x04) /* High Frequency Oscillator 1 Fault Flag */
|
|
|
434 |
#define XT2OF (0x08) /* High Frequency Oscillator 2 Fault Flag */
|
|
|
435 |
#define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */
|
|
|
436 |
#define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */
|
|
|
437 |
#define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */
|
|
|
438 |
#define DCOPLUS (0x80) /* DCO+ Enable */
|
|
|
439 |
|
|
|
440 |
#define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */
|
|
|
441 |
#define XCAP5_5F (0x10) /* XIN Cap = XOUT Cap = 5.5pf */
|
|
|
442 |
#define XCAP8_5PF (0x20) /* XIN Cap = XOUT Cap = 8.5pf */
|
|
|
443 |
#define XCAP11PF (0x30) /* XIN Cap = XOUT Cap = 11pf */
|
|
|
444 |
#define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap: 0 */
|
|
|
445 |
#define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap: 1 */
|
|
|
446 |
#define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap: 2 */
|
|
|
447 |
#define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap: 3 */
|
|
|
448 |
|
|
|
449 |
SFR_8BIT(FLL_CTL1); /* FLL+ Control 1 */
|
|
|
450 |
#define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */
|
|
|
451 |
#define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */
|
|
|
452 |
#define SELS (0x04) /* Peripheral Module Clock Source (0: DCO, 1: XT2) */
|
|
|
453 |
#define SELM0 (0x08) /* MCLK Source Select 0 */
|
|
|
454 |
#define SELM1 (0x10) /* MCLK Source Select 1 */
|
|
|
455 |
#define XT2OFF (0x20) /* High Frequency Oscillator 2 (XT2) disable */
|
|
|
456 |
#define SMCLKOFF (0x40) /* Peripheral Module Clock (SMCLK) disable */
|
|
|
457 |
#define LFXT1DIG (0x80) /* Enable Digital input for LF clock */
|
|
|
458 |
|
|
|
459 |
#define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */
|
|
|
460 |
#define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */
|
|
|
461 |
#define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */
|
|
|
462 |
#define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */
|
|
|
463 |
|
|
|
464 |
#define SELM_DCO (0x00) /* Select DCO for CPU MCLK */
|
|
|
465 |
#define SELM_XT2 (0x10) /* Select XT2 for CPU MCLK */
|
|
|
466 |
#define SELM_A (0x18) /* Select A (from LFXT1) for CPU MCLK */
|
|
|
467 |
|
|
|
468 |
/* INTERRUPT CONTROL BITS */
|
|
|
469 |
/* These two bits are defined in the Special Function Registers */
|
|
|
470 |
/* #define OFIFG 0x02 */
|
|
|
471 |
/* #define OFIE 0x02 */
|
|
|
472 |
|
|
|
473 |
/************************************************************
|
|
|
474 |
* LCD_A
|
|
|
475 |
************************************************************/
|
|
|
476 |
#define __MSP430_HAS_LCD_A__ /* Definition to show that Module is available */
|
|
|
477 |
|
|
|
478 |
SFR_8BIT(LCDACTL); /* LCD_A Control Register */
|
|
|
479 |
#define LCDON (0x01)
|
|
|
480 |
#define LCDSON (0x04)
|
|
|
481 |
#define LCDMX0 (0x08)
|
|
|
482 |
#define LCDMX1 (0x10)
|
|
|
483 |
#define LCDFREQ0 (0x20)
|
|
|
484 |
#define LCDFREQ1 (0x40)
|
|
|
485 |
#define LCDFREQ2 (0x80)
|
|
|
486 |
/* Display modes coded with Bits 2-4 */
|
|
|
487 |
#define LCDSTATIC (LCDSON)
|
|
|
488 |
#define LCD2MUX (LCDMX0+LCDSON)
|
|
|
489 |
#define LCD3MUX (LCDMX1+LCDSON)
|
|
|
490 |
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
|
|
|
491 |
/* Frequency select code with Bits 5-7 */
|
|
|
492 |
#define LCDFREQ_32 (0x00) /* LCD Freq: ACLK divided by 32 */
|
|
|
493 |
#define LCDFREQ_64 (0x20) /* LCD Freq: ACLK divided by 64 */
|
|
|
494 |
#define LCDFREQ_96 (0x40) /* LCD Freq: ACLK divided by 96 */
|
|
|
495 |
#define LCDFREQ_128 (0x60) /* LCD Freq: ACLK divided by 128 */
|
|
|
496 |
#define LCDFREQ_192 (0x80) /* LCD Freq: ACLK divided by 192 */
|
|
|
497 |
#define LCDFREQ_256 (0xA0) /* LCD Freq: ACLK divided by 256 */
|
|
|
498 |
#define LCDFREQ_384 (0xC0) /* LCD Freq: ACLK divided by 384 */
|
|
|
499 |
#define LCDFREQ_512 (0xE0) /* LCD Freq: ACLK divided by 512 */
|
|
|
500 |
|
|
|
501 |
SFR_8BIT(LCDAPCTL0); /* LCD_A Port Control Register 0 */
|
|
|
502 |
#define LCDS0 (0x01) /* LCD Segment 0 to 3 Enable. */
|
|
|
503 |
#define LCDS4 (0x02) /* LCD Segment 4 to 7 Enable. */
|
|
|
504 |
#define LCDS8 (0x04) /* LCD Segment 8 to 11 Enable. */
|
|
|
505 |
#define LCDS12 (0x08) /* LCD Segment 12 to 15 Enable. */
|
|
|
506 |
#define LCDS16 (0x10) /* LCD Segment 16 to 19 Enable. */
|
|
|
507 |
#define LCDS20 (0x20) /* LCD Segment 20 to 23 Enable. */
|
|
|
508 |
#define LCDS24 (0x40) /* LCD Segment 24 to 27 Enable. */
|
|
|
509 |
#define LCDS28 (0x80) /* LCD Segment 28 to 31 Enable. */
|
|
|
510 |
|
|
|
511 |
SFR_8BIT(LCDAPCTL1); /* LCD_A Port Control Register 1 */
|
|
|
512 |
#define LCDS32 (0x01) /* LCD Segment 32 to 35 Enable. */
|
|
|
513 |
#define LCDS36 (0x02) /* LCD Segment 36 to 39 Enable. */
|
|
|
514 |
|
|
|
515 |
SFR_8BIT(LCDAVCTL0); /* LCD_A Voltage Control Register 0 */
|
|
|
516 |
#define LCD2B (0x01) /* Selects 1/2 bias. */
|
|
|
517 |
#define VLCDREF0 (0x02) /* Selects reference voltage for regulated charge pump: 0 */
|
|
|
518 |
#define VLCDREF1 (0x04) /* Selects reference voltage for regulated charge pump: 1 */
|
|
|
519 |
#define LCDCPEN (0x08) /* LCD Voltage Charge Pump Enable. */
|
|
|
520 |
#define VLCDEXT (0x10) /* Select external source for VLCD. */
|
|
|
521 |
#define LCDREXT (0x20) /* Selects external connections for LCD mid voltages. */
|
|
|
522 |
#define LCDR03EXT (0x40) /* Selects external connection for lowest LCD voltage. */
|
|
|
523 |
|
|
|
524 |
/* Reference voltage source select for the regulated charge pump */
|
|
|
525 |
#define VLCDREF_0 (0<<1) /* Internal */
|
|
|
526 |
#define VLCDREF_1 (1<<1) /* External */
|
|
|
527 |
#define VLCDREF_2 (2<<1) /* Reserved */
|
|
|
528 |
#define VLCDREF_3 (3<<1) /* Reserved */
|
|
|
529 |
|
|
|
530 |
SFR_8BIT(LCDAVCTL1); /* LCD_A Voltage Control Register 1 */
|
|
|
531 |
#define VLCD0 (0x02) /* VLCD select: 0 */
|
|
|
532 |
#define VLCD1 (0x04) /* VLCD select: 1 */
|
|
|
533 |
#define VLCD2 (0x08) /* VLCD select: 2 */
|
|
|
534 |
#define VLCD3 (0x10) /* VLCD select: 3 */
|
|
|
535 |
|
|
|
536 |
/* Charge pump voltage selections */
|
|
|
537 |
#define VLCD_0 (0<<1) /* Charge pump disabled */
|
|
|
538 |
#define VLCD_1 (1<<1) /* VLCD = 2.60V */
|
|
|
539 |
#define VLCD_2 (2<<1) /* VLCD = 2.66V */
|
|
|
540 |
#define VLCD_3 (3<<1) /* VLCD = 2.72V */
|
|
|
541 |
#define VLCD_4 (4<<1) /* VLCD = 2.78V */
|
|
|
542 |
#define VLCD_5 (5<<1) /* VLCD = 2.84V */
|
|
|
543 |
#define VLCD_6 (6<<1) /* VLCD = 2.90V */
|
|
|
544 |
#define VLCD_7 (7<<1) /* VLCD = 2.96V */
|
|
|
545 |
#define VLCD_8 (8<<1) /* VLCD = 3.02V */
|
|
|
546 |
#define VLCD_9 (9<<1) /* VLCD = 3.08V */
|
|
|
547 |
#define VLCD_10 (10<<1) /* VLCD = 3.14V */
|
|
|
548 |
#define VLCD_11 (11<<1) /* VLCD = 3.20V */
|
|
|
549 |
#define VLCD_12 (12<<1) /* VLCD = 3.26V */
|
|
|
550 |
#define VLCD_13 (12<<1) /* VLCD = 3.32V */
|
|
|
551 |
#define VLCD_14 (13<<1) /* VLCD = 3.38V */
|
|
|
552 |
#define VLCD_15 (15<<1) /* VLCD = 3.44V */
|
|
|
553 |
|
|
|
554 |
#define VLCD_DISABLED (0<<1) /* Charge pump disabled */
|
|
|
555 |
#define VLCD_2_60 (1<<1) /* VLCD = 2.60V */
|
|
|
556 |
#define VLCD_2_66 (2<<1) /* VLCD = 2.66V */
|
|
|
557 |
#define VLCD_2_72 (3<<1) /* VLCD = 2.72V */
|
|
|
558 |
#define VLCD_2_78 (4<<1) /* VLCD = 2.78V */
|
|
|
559 |
#define VLCD_2_84 (5<<1) /* VLCD = 2.84V */
|
|
|
560 |
#define VLCD_2_90 (6<<1) /* VLCD = 2.90V */
|
|
|
561 |
#define VLCD_2_96 (7<<1) /* VLCD = 2.96V */
|
|
|
562 |
#define VLCD_3_02 (8<<1) /* VLCD = 3.02V */
|
|
|
563 |
#define VLCD_3_08 (9<<1) /* VLCD = 3.08V */
|
|
|
564 |
#define VLCD_3_14 (10<<1) /* VLCD = 3.14V */
|
|
|
565 |
#define VLCD_3_20 (11<<1) /* VLCD = 3.20V */
|
|
|
566 |
#define VLCD_3_26 (12<<1) /* VLCD = 3.26V */
|
|
|
567 |
#define VLCD_3_32 (12<<1) /* VLCD = 3.32V */
|
|
|
568 |
#define VLCD_3_38 (13<<1) /* VLCD = 3.38V */
|
|
|
569 |
#define VLCD_3_44 (15<<1) /* VLCD = 3.44V */
|
|
|
570 |
|
|
|
571 |
#define LCDMEM_ (0x0091) /* LCD Memory */
|
|
|
572 |
#ifdef __ASM_HEADER__
|
|
|
573 |
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
|
|
|
574 |
#else
|
|
|
575 |
#define LCDMEM ((char*) LCDMEM_) /* LCD Memory (for C) */
|
|
|
576 |
#endif
|
|
|
577 |
SFR_8BIT(LCDM1); /* LCD Memory 1 */
|
|
|
578 |
SFR_8BIT(LCDM2); /* LCD Memory 2 */
|
|
|
579 |
SFR_8BIT(LCDM3); /* LCD Memory 3 */
|
|
|
580 |
SFR_8BIT(LCDM4); /* LCD Memory 4 */
|
|
|
581 |
SFR_8BIT(LCDM5); /* LCD Memory 5 */
|
|
|
582 |
SFR_8BIT(LCDM6); /* LCD Memory 6 */
|
|
|
583 |
SFR_8BIT(LCDM7); /* LCD Memory 7 */
|
|
|
584 |
SFR_8BIT(LCDM8); /* LCD Memory 8 */
|
|
|
585 |
SFR_8BIT(LCDM9); /* LCD Memory 9 */
|
|
|
586 |
SFR_8BIT(LCDM10); /* LCD Memory 10 */
|
|
|
587 |
SFR_8BIT(LCDM11); /* LCD Memory 11 */
|
|
|
588 |
SFR_8BIT(LCDM12); /* LCD Memory 12 */
|
|
|
589 |
SFR_8BIT(LCDM13); /* LCD Memory 13 */
|
|
|
590 |
SFR_8BIT(LCDM14); /* LCD Memory 14 */
|
|
|
591 |
SFR_8BIT(LCDM15); /* LCD Memory 15 */
|
|
|
592 |
SFR_8BIT(LCDM16); /* LCD Memory 16 */
|
|
|
593 |
SFR_8BIT(LCDM17); /* LCD Memory 17 */
|
|
|
594 |
SFR_8BIT(LCDM18); /* LCD Memory 18 */
|
|
|
595 |
SFR_8BIT(LCDM19); /* LCD Memory 19 */
|
|
|
596 |
SFR_8BIT(LCDM20); /* LCD Memory 20 */
|
|
|
597 |
|
|
|
598 |
#define LCDMA (LCDM10) /* LCD Memory A */
|
|
|
599 |
#define LCDMB (LCDM11) /* LCD Memory B */
|
|
|
600 |
#define LCDMC (LCDM12) /* LCD Memory C */
|
|
|
601 |
#define LCDMD (LCDM13) /* LCD Memory D */
|
|
|
602 |
#define LCDME (LCDM14) /* LCD Memory E */
|
|
|
603 |
#define LCDMF (LCDM15) /* LCD Memory F */
|
|
|
604 |
|
|
|
605 |
/************************************************************
|
|
|
606 |
* DIGITAL I/O Port1/2
|
|
|
607 |
************************************************************/
|
|
|
608 |
#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */
|
|
|
609 |
#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */
|
|
|
610 |
|
|
|
611 |
SFR_8BIT(P1IN); /* Port 1 Input */
|
|
|
612 |
SFR_8BIT(P1OUT); /* Port 1 Output */
|
|
|
613 |
SFR_8BIT(P1DIR); /* Port 1 Direction */
|
|
|
614 |
SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */
|
|
|
615 |
SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */
|
|
|
616 |
SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */
|
|
|
617 |
SFR_8BIT(P1SEL); /* Port 1 Selection */
|
|
|
618 |
SFR_8BIT(P1SEL2); /* Port 1 Selection 2 */
|
|
|
619 |
|
|
|
620 |
SFR_8BIT(P2IN); /* Port 2 Input */
|
|
|
621 |
SFR_8BIT(P2OUT); /* Port 2 Output */
|
|
|
622 |
SFR_8BIT(P2DIR); /* Port 2 Direction */
|
|
|
623 |
SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */
|
|
|
624 |
SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */
|
|
|
625 |
SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */
|
|
|
626 |
SFR_8BIT(P2SEL); /* Port 2 Selection */
|
|
|
627 |
|
|
|
628 |
/************************************************************
|
|
|
629 |
* DIGITAL I/O Port3/4
|
|
|
630 |
************************************************************/
|
|
|
631 |
#define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */
|
|
|
632 |
#define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */
|
|
|
633 |
|
|
|
634 |
SFR_8BIT(P3IN); /* Port 3 Input */
|
|
|
635 |
SFR_8BIT(P3OUT); /* Port 3 Output */
|
|
|
636 |
SFR_8BIT(P3DIR); /* Port 3 Direction */
|
|
|
637 |
SFR_8BIT(P3SEL); /* Port 3 Selection */
|
|
|
638 |
|
|
|
639 |
SFR_8BIT(P4IN); /* Port 4 Input */
|
|
|
640 |
SFR_8BIT(P4OUT); /* Port 4 Output */
|
|
|
641 |
SFR_8BIT(P4DIR); /* Port 4 Direction */
|
|
|
642 |
SFR_8BIT(P4SEL); /* Port 4 Selection */
|
|
|
643 |
|
|
|
644 |
/************************************************************
|
|
|
645 |
* DIGITAL I/O Port5/6
|
|
|
646 |
************************************************************/
|
|
|
647 |
#define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */
|
|
|
648 |
#define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */
|
|
|
649 |
|
|
|
650 |
SFR_8BIT(P5IN); /* Port 5 Input */
|
|
|
651 |
SFR_8BIT(P5OUT); /* Port 5 Output */
|
|
|
652 |
SFR_8BIT(P5DIR); /* Port 5 Direction */
|
|
|
653 |
SFR_8BIT(P5SEL); /* Port 5 Selection */
|
|
|
654 |
|
|
|
655 |
SFR_8BIT(P6IN); /* Port 6 Input */
|
|
|
656 |
SFR_8BIT(P6OUT); /* Port 6 Output */
|
|
|
657 |
SFR_8BIT(P6DIR); /* Port 6 Direction */
|
|
|
658 |
SFR_8BIT(P6SEL); /* Port 6 Selection */
|
|
|
659 |
|
|
|
660 |
/************************************************************
|
|
|
661 |
* SD16_A1 - Sigma Delta 16 Bit
|
|
|
662 |
************************************************************/
|
|
|
663 |
#define __MSP430_HAS_SD16_A1__ /* Definition to show that Module is available */
|
|
|
664 |
|
|
|
665 |
SFR_8BIT(SD16INCTL0); /* SD16 Input Control Register Channel 0 */
|
|
|
666 |
SFR_8BIT(SD16AE); /* SD16 Analog Input Enable Register */
|
|
|
667 |
SFR_8BIT(SD16CONF0); /* SD16 Internal Configuration Register 0 */
|
|
|
668 |
SFR_8BIT(SD16CONF1); /* SD16 Internal Configuration Register 1 */
|
|
|
669 |
/* Please use only the recommended settings */
|
|
|
670 |
|
|
|
671 |
SFR_16BIT(SD16CTL); /* Sigma Delta ADC 16 Control Register */
|
|
|
672 |
SFR_16BIT(SD16CCTL0); /* SD16 Channel 0 Control Register */
|
|
|
673 |
SFR_16BIT(SD16IV); /* SD16 Interrupt Vector Register */
|
|
|
674 |
SFR_16BIT(SD16MEM0); /* SD16 Channel 0 Conversion Memory */
|
|
|
675 |
|
|
|
676 |
/* SD16AE */
|
|
|
677 |
#define SD16AE0 (0x0001) /* SD16 External Input Enable 0 */
|
|
|
678 |
#define SD16AE1 (0x0002) /* SD16 External Input Enable 1 */
|
|
|
679 |
#define SD16AE2 (0x0004) /* SD16 External Input Enable 2 */
|
|
|
680 |
#define SD16AE3 (0x0008) /* SD16 External Input Enable 3 */
|
|
|
681 |
#define SD16AE4 (0x0010) /* SD16 External Input Enable 4 */
|
|
|
682 |
#define SD16AE5 (0x0020) /* SD16 External Input Enable 5 */
|
|
|
683 |
#define SD16AE6 (0x0040) /* SD16 External Input Enable 6 */
|
|
|
684 |
#define SD16AE7 (0x0080) /* SD16 External Input Enable 7 */
|
|
|
685 |
|
|
|
686 |
/* SD16INCTLx */
|
|
|
687 |
#define SD16INCH0 (0x0001) /* SD16 Input Channel select 0 */
|
|
|
688 |
#define SD16INCH1 (0x0002) /* SD16 Input Channel select 1 */
|
|
|
689 |
#define SD16INCH2 (0x0004) /* SD16 Input Channel select 2 */
|
|
|
690 |
#define SD16GAIN0 (0x0008) /* SD16 Input Pre-Amplifier Gain Select 0 */
|
|
|
691 |
#define SD16GAIN1 (0x0010) /* SD16 Input Pre-Amplifier Gain Select 1 */
|
|
|
692 |
#define SD16GAIN2 (0x0020) /* SD16 Input Pre-Amplifier Gain Select 2 */
|
|
|
693 |
#define SD16INTDLY0 (0x0040) /* SD16 Interrupt Delay after 1.Conversion 0 */
|
|
|
694 |
#define SD16INTDLY1 (0x0080) /* SD16 Interrupt Delay after 1.Conversion 1 */
|
|
|
695 |
|
|
|
696 |
#define SD16GAIN_1 (0x0000) /* SD16 Input Pre-Amplifier Gain Select *1 */
|
|
|
697 |
#define SD16GAIN_2 (0x0008) /* SD16 Input Pre-Amplifier Gain Select *2 */
|
|
|
698 |
#define SD16GAIN_4 (0x0010) /* SD16 Input Pre-Amplifier Gain Select *4 */
|
|
|
699 |
#define SD16GAIN_8 (0x0018) /* SD16 Input Pre-Amplifier Gain Select *8 */
|
|
|
700 |
#define SD16GAIN_16 (0x0020) /* SD16 Input Pre-Amplifier Gain Select *16 */
|
|
|
701 |
#define SD16GAIN_32 (0x0028) /* SD16 Input Pre-Amplifier Gain Select *32 */
|
|
|
702 |
|
|
|
703 |
#define SD16INCH_0 (0x0000) /* SD16 Input Channel select A0 */
|
|
|
704 |
#define SD16INCH_1 (0x0001) /* SD16 Input Channel select A1 */
|
|
|
705 |
#define SD16INCH_2 (0x0002) /* SD16 Input Channel select A2 */
|
|
|
706 |
#define SD16INCH_3 (0x0003) /* SD16 Input Channel select A3 */
|
|
|
707 |
#define SD16INCH_4 (0x0004) /* SD16 Input Channel select A4 */
|
|
|
708 |
#define SD16INCH_5 (0x0005) /* SD16 Input Channel select Vcc divider */
|
|
|
709 |
#define SD16INCH_6 (0x0006) /* SD16 Input Channel select Temp */
|
|
|
710 |
#define SD16INCH_7 (0x0007) /* SD16 Input Channel select Offset */
|
|
|
711 |
|
|
|
712 |
#define SD16INTDLY_0 (0x0000) /* SD16 Interrupt Delay: Int. after 4.Conversion */
|
|
|
713 |
#define SD16INTDLY_1 (0x0040) /* SD16 Interrupt Delay: Int. after 3.Conversion */
|
|
|
714 |
#define SD16INTDLY_2 (0x0080) /* SD16 Interrupt Delay: Int. after 2.Conversion */
|
|
|
715 |
#define SD16INTDLY_3 (0x00C0) /* SD16 Interrupt Delay: Int. after 1.Conversion */
|
|
|
716 |
|
|
|
717 |
/* SD16CTL */
|
|
|
718 |
#define SD16OVIE (0x0002) /* SD16 Overflow Interupt Enable */
|
|
|
719 |
#define SD16REFON (0x0004) /* SD16 Switch internal Reference on */
|
|
|
720 |
#define SD16VMIDON (0x0008) /* SD16 Switch Vmid Buffer on */
|
|
|
721 |
#define SD16SSEL0 (0x0010) /* SD16 Clock Source Select 0 */
|
|
|
722 |
#define SD16SSEL1 (0x0020) /* SD16 Clock Source Select 1 */
|
|
|
723 |
#define SD16DIV0 (0x0040) /* SD16 Clock Divider Select 0 */
|
|
|
724 |
#define SD16DIV1 (0x0080) /* SD16 Clock Divider Select 1 */
|
|
|
725 |
#define SD16LP (0x0100) /* SD16 Low Power Mode Enable */
|
|
|
726 |
#define SD16XDIV0 (0x0200) /* SD16 2.Clock Divider Select 0 */
|
|
|
727 |
#define SD16XDIV1 (0x0400) /* SD16 2.Clock Divider Select 1 */
|
|
|
728 |
//#define SD16XDIV2 (0x0800) /* SD16 2.Clock Divider Select 2 */
|
|
|
729 |
|
|
|
730 |
#define SD16DIV_0 (0x0000) /* SD16 Clock Divider Select /1 */
|
|
|
731 |
#define SD16DIV_1 (SD16DIV0) /* SD16 Clock Divider Select /2 */
|
|
|
732 |
#define SD16DIV_2 (SD16DIV1) /* SD16 Clock Divider Select /4 */
|
|
|
733 |
#define SD16DIV_3 (SD16DIV0+SD16DIV1) /* SD16 Clock Divider Select /8 */
|
|
|
734 |
|
|
|
735 |
#define SD16XDIV_0 (0x0000) /* SD16 2.Clock Divider Select /1 */
|
|
|
736 |
#define SD16XDIV_1 (SD16XDIV0) /* SD16 2.Clock Divider Select /3 */
|
|
|
737 |
#define SD16XDIV_2 (SD16XDIV1) /* SD16 2.Clock Divider Select /16 */
|
|
|
738 |
#define SD16XDIV_3 (SD16XDIV0+SD16XDIV1) /* SD16 2.Clock Divider Select /48 */
|
|
|
739 |
|
|
|
740 |
#define SD16SSEL_0 (0x0000) /* SD16 Clock Source Select MCLK */
|
|
|
741 |
#define SD16SSEL_1 (SD16SSEL0) /* SD16 Clock Source Select SMCLK */
|
|
|
742 |
#define SD16SSEL_2 (SD16SSEL1) /* SD16 Clock Source Select ACLK */
|
|
|
743 |
#define SD16SSEL_3 (SD16SSEL0+SD16SSEL1) /* SD16 Clock Source Select TACLK */
|
|
|
744 |
|
|
|
745 |
/* SD16CCTLx */
|
|
|
746 |
//#define RESERVED (0x0001) /* RESERVED */
|
|
|
747 |
#define SD16SC (0x0002) /* SD16 Start Conversion */
|
|
|
748 |
#define SD16IFG (0x0004) /* SD16 Channel x Interrupt Flag */
|
|
|
749 |
#define SD16IE (0x0008) /* SD16 Channel x Interrupt Enable */
|
|
|
750 |
#define SD16DF (0x0010) /* SD16 Channel x Data Format: 0:Unipolar/1:Bipolar */
|
|
|
751 |
#define SD16OVIFG (0x0020) /* SD16 Channel x Overflow Interrupt Flag */
|
|
|
752 |
#define SD16LSBACC (0x0040) /* SD16 Channel x Access LSB of ADC */
|
|
|
753 |
#define SD16LSBTOG (0x0080) /* SD16 Channel x Toggle LSB Output of ADC */
|
|
|
754 |
#define SD16OSR0 (0x0100) /* SD16 Channel x OverSampling Ratio 0 */
|
|
|
755 |
#define SD16OSR1 (0x0200) /* SD16 Channel x OverSampling Ratio 1 */
|
|
|
756 |
#define SD16SNGL (0x0400) /* SD16 Channel x Single Conversion On/Off */
|
|
|
757 |
#define SD16XOSR (0x0800) /* SD16 Channel x Extended OverSampling Ratio */
|
|
|
758 |
#define SD16UNI (0x1000) /* SD16 Channel x Bipolar(0) / Unipolar(1) Mode */
|
|
|
759 |
#define SD16BUF0 (0x2000) /* SD16 Channel x High Impedance Input Buffer Select: 0 */
|
|
|
760 |
#define SD16BUF1 (0x4000) /* SD16 Channel x High Impedance Input Buffer Select: 1 */
|
|
|
761 |
|
|
|
762 |
#define SD16OSR_1024 (SD16OSR0+SD16XOSR) /* SD16 Channel x OverSampling Ratio 1024 */
|
|
|
763 |
#define SD16OSR_512 (SD16XOSR) /* SD16 Channel x OverSampling Ratio 512 */
|
|
|
764 |
#define SD16OSR_256 (0x0000) /* SD16 Channel x OverSampling Ratio 256 */
|
|
|
765 |
#define SD16OSR_128 (SD16OSR0) /* SD16 Channel x OverSampling Ratio 128 */
|
|
|
766 |
#define SD16OSR_64 (SD16OSR1) /* SD16 Channel x OverSampling Ratio 64 */
|
|
|
767 |
#define SD16OSR_32 (SD16OSR0+SD16OSR1) /* SD16 Channel x OverSampling Ratio 32 */
|
|
|
768 |
|
|
|
769 |
#define SD16BUF_0 (0x0000) /* SD16 High Imp. Input Buffer: Disabled */
|
|
|
770 |
#define SD16BUF_1 (SD16BUF0) /* SD16 High Imp. Input Buffer: Slow */
|
|
|
771 |
#define SD16BUF_2 (SD16BUF1) /* SD16 High Imp. Input Buffer: Meduim */
|
|
|
772 |
#define SD16BUF_3 (SD16BUF0+SD16BUF1) /* SD16 High Imp. Input Buffer: Fast */
|
|
|
773 |
|
|
|
774 |
/* SD16IV Definitions */
|
|
|
775 |
#define SD16IV_NONE (0x0000) /* No Interrupt pending */
|
|
|
776 |
#define SD16IV_SD16OVIFG (0x0002) /* SD16OVIFG */
|
|
|
777 |
#define SD16IV_SD16MEM0 (0x0004) /* SD16MEM0 SD16IFG */
|
|
|
778 |
|
|
|
779 |
/************************************************************
|
|
|
780 |
* Brown-Out, Supply Voltage Supervision (SVS)
|
|
|
781 |
************************************************************/
|
|
|
782 |
#define __MSP430_HAS_SVS__ /* Definition to show that Module is available */
|
|
|
783 |
|
|
|
784 |
SFR_8BIT(SVSCTL); /* SVS Control */
|
|
|
785 |
#define SVSFG (0x01) /* SVS Flag */
|
|
|
786 |
#define SVSOP (0x02) /* SVS output (read only) */
|
|
|
787 |
#define SVSON (0x04) /* Switches the SVS on/off */
|
|
|
788 |
#define PORON (0x08) /* Enable POR Generation if Low Voltage */
|
|
|
789 |
#define VLD0 (0x10)
|
|
|
790 |
#define VLD1 (0x20)
|
|
|
791 |
#define VLD2 (0x40)
|
|
|
792 |
#define VLD3 (0x80)
|
|
|
793 |
|
|
|
794 |
#define VLDON (0x10)
|
|
|
795 |
#define VLDOFF (0x00)
|
|
|
796 |
#define VLD_1_8V (0x10)
|
|
|
797 |
|
|
|
798 |
/************************************************************
|
|
|
799 |
* Timer A3
|
|
|
800 |
************************************************************/
|
|
|
801 |
#define __MSP430_HAS_TA3__ /* Definition to show that Module is available */
|
|
|
802 |
|
|
|
803 |
SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */
|
|
|
804 |
SFR_16BIT(TACTL); /* Timer A Control */
|
|
|
805 |
SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */
|
|
|
806 |
SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */
|
|
|
807 |
SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */
|
|
|
808 |
SFR_16BIT(TAR); /* Timer A Counter Register */
|
|
|
809 |
SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */
|
|
|
810 |
SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */
|
|
|
811 |
SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 */
|
|
|
812 |
|
|
|
813 |
/* Alternate register names */
|
|
|
814 |
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
|
|
|
815 |
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
|
|
|
816 |
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
|
|
|
817 |
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
|
|
|
818 |
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
|
|
|
819 |
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
|
|
|
820 |
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
|
|
|
821 |
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
|
|
|
822 |
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
|
|
|
823 |
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
|
|
|
824 |
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
|
|
|
825 |
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
|
|
|
826 |
/* Alternate register names - 5xx style */
|
|
|
827 |
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
|
|
|
828 |
#define TA0CTL TACTL /* Timer A Control */
|
|
|
829 |
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
|
|
|
830 |
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
|
|
|
831 |
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
|
|
|
832 |
#define TA0R TAR /* Timer A Counter Register */
|
|
|
833 |
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
|
|
|
834 |
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
|
|
|
835 |
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
|
|
|
836 |
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
|
|
|
837 |
#define TA0CTL_ TACTL_ /* Timer A Control */
|
|
|
838 |
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
|
|
|
839 |
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
|
|
|
840 |
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
|
|
|
841 |
#define TA0R_ TAR_ /* Timer A Counter Register */
|
|
|
842 |
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
|
|
|
843 |
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
|
|
|
844 |
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
|
|
|
845 |
|
|
|
846 |
#define TASSEL1 (0x0200) /* Timer A clock source select 0 */
|
|
|
847 |
#define TASSEL0 (0x0100) /* Timer A clock source select 1 */
|
|
|
848 |
#define ID1 (0x0080) /* Timer A clock input divider 1 */
|
|
|
849 |
#define ID0 (0x0040) /* Timer A clock input divider 0 */
|
|
|
850 |
#define MC1 (0x0020) /* Timer A mode control 1 */
|
|
|
851 |
#define MC0 (0x0010) /* Timer A mode control 0 */
|
|
|
852 |
#define TACLR (0x0004) /* Timer A counter clear */
|
|
|
853 |
#define TAIE (0x0002) /* Timer A counter interrupt enable */
|
|
|
854 |
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
|
|
|
855 |
|
|
|
856 |
#define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */
|
|
|
857 |
#define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */
|
|
|
858 |
#define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */
|
|
|
859 |
#define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */
|
|
|
860 |
#define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */
|
|
|
861 |
#define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */
|
|
|
862 |
#define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */
|
|
|
863 |
#define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */
|
|
|
864 |
#define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */
|
|
|
865 |
#define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */
|
|
|
866 |
#define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */
|
|
|
867 |
#define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */
|
|
|
868 |
|
|
|
869 |
#define CM1 (0x8000) /* Capture mode 1 */
|
|
|
870 |
#define CM0 (0x4000) /* Capture mode 0 */
|
|
|
871 |
#define CCIS1 (0x2000) /* Capture input select 1 */
|
|
|
872 |
#define CCIS0 (0x1000) /* Capture input select 0 */
|
|
|
873 |
#define SCS (0x0800) /* Capture sychronize */
|
|
|
874 |
#define SCCI (0x0400) /* Latched capture signal (read) */
|
|
|
875 |
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
|
|
|
876 |
#define OUTMOD2 (0x0080) /* Output mode 2 */
|
|
|
877 |
#define OUTMOD1 (0x0040) /* Output mode 1 */
|
|
|
878 |
#define OUTMOD0 (0x0020) /* Output mode 0 */
|
|
|
879 |
#define CCIE (0x0010) /* Capture/compare interrupt enable */
|
|
|
880 |
#define CCI (0x0008) /* Capture input signal (read) */
|
|
|
881 |
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
|
|
|
882 |
#define COV (0x0002) /* Capture/compare overflow flag */
|
|
|
883 |
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
|
|
|
884 |
|
|
|
885 |
#define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */
|
|
|
886 |
#define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */
|
|
|
887 |
#define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */
|
|
|
888 |
#define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */
|
|
|
889 |
#define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */
|
|
|
890 |
#define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */
|
|
|
891 |
#define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */
|
|
|
892 |
#define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */
|
|
|
893 |
#define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */
|
|
|
894 |
#define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */
|
|
|
895 |
#define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */
|
|
|
896 |
#define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */
|
|
|
897 |
#define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */
|
|
|
898 |
#define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */
|
|
|
899 |
#define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */
|
|
|
900 |
#define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */
|
|
|
901 |
|
|
|
902 |
/* TA3IV Definitions */
|
|
|
903 |
#define TAIV_NONE (0x0000) /* No Interrupt pending */
|
|
|
904 |
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
|
|
|
905 |
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
|
|
|
906 |
#define TAIV_6 (0x0006) /* Reserved */
|
|
|
907 |
#define TAIV_8 (0x0008) /* Reserved */
|
|
|
908 |
#define TAIV_TAIFG (0x000A) /* TAIFG */
|
|
|
909 |
|
|
|
910 |
/************************************************************
|
|
|
911 |
* Timer B3
|
|
|
912 |
************************************************************/
|
|
|
913 |
#define __MSP430_HAS_TB3__ /* Definition to show that Module is available */
|
|
|
914 |
|
|
|
915 |
SFR_16BIT(TBIV); /* Timer B Interrupt Vector Word */
|
|
|
916 |
SFR_16BIT(TBCTL); /* Timer B Control */
|
|
|
917 |
SFR_16BIT(TBCCTL0); /* Timer B Capture/Compare Control 0 */
|
|
|
918 |
SFR_16BIT(TBCCTL1); /* Timer B Capture/Compare Control 1 */
|
|
|
919 |
SFR_16BIT(TBCCTL2); /* Timer B Capture/Compare Control 2 */
|
|
|
920 |
SFR_16BIT(TBR); /* Timer B Counter Register */
|
|
|
921 |
SFR_16BIT(TBCCR0); /* Timer B Capture/Compare 0 */
|
|
|
922 |
SFR_16BIT(TBCCR1); /* Timer B Capture/Compare 1 */
|
|
|
923 |
SFR_16BIT(TBCCR2); /* Timer B Capture/Compare 2 */
|
|
|
924 |
|
|
|
925 |
/* Alternate register names - 5xx style */
|
|
|
926 |
#define TB0IV TBIV /* Timer B Interrupt Vector Word */
|
|
|
927 |
#define TB0CTL TBCTL /* Timer B Control */
|
|
|
928 |
#define TB0CCTL0 TBCCTL0 /* Timer B Capture/Compare Control 0 */
|
|
|
929 |
#define TB0CCTL1 TBCCTL1 /* Timer B Capture/Compare Control 1 */
|
|
|
930 |
#define TB0CCTL2 TBCCTL2 /* Timer B Capture/Compare Control 2 */
|
|
|
931 |
#define TB0R TBR /* Timer B Counter Register */
|
|
|
932 |
#define TB0CCR0 TBCCR0 /* Timer B Capture/Compare 0 */
|
|
|
933 |
#define TB0CCR1 TBCCR1 /* Timer B Capture/Compare 1 */
|
|
|
934 |
#define TB0CCR2 TBCCR2 /* Timer B Capture/Compare 2 */
|
|
|
935 |
#define TB0IV_ TBIV_ /* Timer B Interrupt Vector Word */
|
|
|
936 |
#define TB0CTL_ TBCTL_ /* Timer B Control */
|
|
|
937 |
#define TB0CCTL0_ TBCCTL0_ /* Timer B Capture/Compare Control 0 */
|
|
|
938 |
#define TB0CCTL1_ TBCCTL1_ /* Timer B Capture/Compare Control 1 */
|
|
|
939 |
#define TB0CCTL2_ TBCCTL2_ /* Timer B Capture/Compare Control 2 */
|
|
|
940 |
#define TB0R_ TBR_ /* Timer B Counter Register */
|
|
|
941 |
#define TB0CCR0_ TBCCR0_ /* Timer B Capture/Compare 0 */
|
|
|
942 |
#define TB0CCR1_ TBCCR1_ /* Timer B Capture/Compare 1 */
|
|
|
943 |
#define TB0CCR2_ TBCCR2_ /* Timer B Capture/Compare 2 */
|
|
|
944 |
|
|
|
945 |
#define TBCLGRP1 (0x4000) /* Timer B Compare latch load group 1 */
|
|
|
946 |
#define TBCLGRP0 (0x2000) /* Timer B Compare latch load group 0 */
|
|
|
947 |
#define CNTL1 (0x1000) /* Counter lenght 1 */
|
|
|
948 |
#define CNTL0 (0x0800) /* Counter lenght 0 */
|
|
|
949 |
#define TBSSEL1 (0x0200) /* Clock source 1 */
|
|
|
950 |
#define TBSSEL0 (0x0100) /* Clock source 0 */
|
|
|
951 |
#define TBCLR (0x0004) /* Timer B counter clear */
|
|
|
952 |
#define TBIE (0x0002) /* Timer B interrupt enable */
|
|
|
953 |
#define TBIFG (0x0001) /* Timer B interrupt flag */
|
|
|
954 |
|
|
|
955 |
#define SHR1 (0x4000) /* Timer B Compare latch load group 1 */
|
|
|
956 |
#define SHR0 (0x2000) /* Timer B Compare latch load group 0 */
|
|
|
957 |
|
|
|
958 |
#define TBSSEL_0 (0*0x0100u) /* Clock Source: TBCLK */
|
|
|
959 |
#define TBSSEL_1 (1*0x0100u) /* Clock Source: ACLK */
|
|
|
960 |
#define TBSSEL_2 (2*0x0100u) /* Clock Source: SMCLK */
|
|
|
961 |
#define TBSSEL_3 (3*0x0100u) /* Clock Source: INCLK */
|
|
|
962 |
#define CNTL_0 (0*0x0800u) /* Counter lenght: 16 bit */
|
|
|
963 |
#define CNTL_1 (1*0x0800u) /* Counter lenght: 12 bit */
|
|
|
964 |
#define CNTL_2 (2*0x0800u) /* Counter lenght: 10 bit */
|
|
|
965 |
#define CNTL_3 (3*0x0800u) /* Counter lenght: 8 bit */
|
|
|
966 |
#define SHR_0 (0*0x2000u) /* Timer B Group: 0 - individually */
|
|
|
967 |
#define SHR_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
|
|
|
968 |
#define SHR_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
|
|
|
969 |
#define SHR_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */
|
|
|
970 |
#define TBCLGRP_0 (0*0x2000u) /* Timer B Group: 0 - individually */
|
|
|
971 |
#define TBCLGRP_1 (1*0x2000u) /* Timer B Group: 1 - 3 groups (1-2, 3-4, 5-6) */
|
|
|
972 |
#define TBCLGRP_2 (2*0x2000u) /* Timer B Group: 2 - 2 groups (1-3, 4-6)*/
|
|
|
973 |
#define TBCLGRP_3 (3*0x2000u) /* Timer B Group: 3 - 1 group (all) */
|
|
|
974 |
|
|
|
975 |
/* Additional Timer B Control Register bits are defined in Timer A */
|
|
|
976 |
|
|
|
977 |
#define CLLD1 (0x0400) /* Compare latch load source 1 */
|
|
|
978 |
#define CLLD0 (0x0200) /* Compare latch load source 0 */
|
|
|
979 |
|
|
|
980 |
#define SLSHR1 (0x0400) /* Compare latch load source 1 */
|
|
|
981 |
#define SLSHR0 (0x0200) /* Compare latch load source 0 */
|
|
|
982 |
|
|
|
983 |
#define SLSHR_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */
|
|
|
984 |
#define SLSHR_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */
|
|
|
985 |
#define SLSHR_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */
|
|
|
986 |
#define SLSHR_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
|
|
|
987 |
|
|
|
988 |
#define CLLD_0 (0*0x0200u) /* Compare latch load sourec : 0 - immediate */
|
|
|
989 |
#define CLLD_1 (1*0x0200u) /* Compare latch load sourec : 1 - TBR counts to 0 */
|
|
|
990 |
#define CLLD_2 (2*0x0200u) /* Compare latch load sourec : 2 - up/down */
|
|
|
991 |
#define CLLD_3 (3*0x0200u) /* Compare latch load sourec : 3 - TBR counts to TBCTL0 */
|
|
|
992 |
|
|
|
993 |
/* TB3IV Definitions */
|
|
|
994 |
#define TBIV_NONE (0x0000) /* No Interrupt pending */
|
|
|
995 |
#define TBIV_TBCCR1 (0x0002) /* TBCCR1_CCIFG */
|
|
|
996 |
#define TBIV_TBCCR2 (0x0004) /* TBCCR2_CCIFG */
|
|
|
997 |
#define TBIV_3 (0x0006) /* Reserved */
|
|
|
998 |
#define TBIV_4 (0x0008) /* Reserved */
|
|
|
999 |
#define TBIV_5 (0x000A) /* Reserved */
|
|
|
1000 |
#define TBIV_6 (0x000C) /* Reserved */
|
|
|
1001 |
#define TBIV_TBIFG (0x000E) /* TBIFG */
|
|
|
1002 |
|
|
|
1003 |
/************************************************************
|
|
|
1004 |
* USCI
|
|
|
1005 |
************************************************************/
|
|
|
1006 |
#define __MSP430_HAS_USCI__ /* Definition to show that Module is available */
|
|
|
1007 |
|
|
|
1008 |
SFR_8BIT(UCA0CTL0); /* USCI A0 Control Register 0 */
|
|
|
1009 |
SFR_8BIT(UCA0CTL1); /* USCI A0 Control Register 1 */
|
|
|
1010 |
SFR_8BIT(UCA0BR0); /* USCI A0 Baud Rate 0 */
|
|
|
1011 |
SFR_8BIT(UCA0BR1); /* USCI A0 Baud Rate 1 */
|
|
|
1012 |
SFR_8BIT(UCA0MCTL); /* USCI A0 Modulation Control */
|
|
|
1013 |
SFR_8BIT(UCA0STAT); /* USCI A0 Status Register */
|
|
|
1014 |
SFR_8BIT(UCA0RXBUF); /* USCI A0 Receive Buffer */
|
|
|
1015 |
SFR_8BIT(UCA0TXBUF); /* USCI A0 Transmit Buffer */
|
|
|
1016 |
SFR_8BIT(UCA0ABCTL); /* USCI A0 LIN Control */
|
|
|
1017 |
SFR_8BIT(UCA0IRTCTL); /* USCI A0 IrDA Transmit Control */
|
|
|
1018 |
SFR_8BIT(UCA0IRRCTL); /* USCI A0 IrDA Receive Control */
|
|
|
1019 |
|
|
|
1020 |
|
|
|
1021 |
|
|
|
1022 |
SFR_8BIT(UCB0CTL0); /* USCI B0 Control Register 0 */
|
|
|
1023 |
SFR_8BIT(UCB0CTL1); /* USCI B0 Control Register 1 */
|
|
|
1024 |
SFR_8BIT(UCB0BR0); /* USCI B0 Baud Rate 0 */
|
|
|
1025 |
SFR_8BIT(UCB0BR1); /* USCI B0 Baud Rate 1 */
|
|
|
1026 |
SFR_8BIT(UCB0I2CIE); /* USCI B0 I2C Interrupt Enable Register */
|
|
|
1027 |
SFR_8BIT(UCB0STAT); /* USCI B0 Status Register */
|
|
|
1028 |
SFR_8BIT(UCB0RXBUF); /* USCI B0 Receive Buffer */
|
|
|
1029 |
SFR_8BIT(UCB0TXBUF); /* USCI B0 Transmit Buffer */
|
|
|
1030 |
SFR_16BIT(UCB0I2COA); /* USCI B0 I2C Own Address */
|
|
|
1031 |
SFR_16BIT(UCB0I2CSA); /* USCI B0 I2C Slave Address */
|
|
|
1032 |
|
|
|
1033 |
// UART-Mode Bits
|
|
|
1034 |
#define UCPEN (0x80) /* Async. Mode: Parity enable */
|
|
|
1035 |
#define UCPAR (0x40) /* Async. Mode: Parity 0:odd / 1:even */
|
|
|
1036 |
#define UCMSB (0x20) /* Async. Mode: MSB first 0:LSB / 1:MSB */
|
|
|
1037 |
#define UC7BIT (0x10) /* Async. Mode: Data Bits 0:8-bits / 1:7-bits */
|
|
|
1038 |
#define UCSPB (0x08) /* Async. Mode: Stop Bits 0:one / 1: two */
|
|
|
1039 |
#define UCMODE1 (0x04) /* Async. Mode: USCI Mode 1 */
|
|
|
1040 |
#define UCMODE0 (0x02) /* Async. Mode: USCI Mode 0 */
|
|
|
1041 |
#define UCSYNC (0x01) /* Sync-Mode 0:UART-Mode / 1:SPI-Mode */
|
|
|
1042 |
|
|
|
1043 |
// SPI-Mode Bits
|
|
|
1044 |
#define UCCKPH (0x80) /* Sync. Mode: Clock Phase */
|
|
|
1045 |
#define UCCKPL (0x40) /* Sync. Mode: Clock Polarity */
|
|
|
1046 |
#define UCMST (0x08) /* Sync. Mode: Master Select */
|
|
|
1047 |
|
|
|
1048 |
// I2C-Mode Bits
|
|
|
1049 |
#define UCA10 (0x80) /* 10-bit Address Mode */
|
|
|
1050 |
#define UCSLA10 (0x40) /* 10-bit Slave Address Mode */
|
|
|
1051 |
#define UCMM (0x20) /* Multi-Master Environment */
|
|
|
1052 |
//#define res (0x10) /* reserved */
|
|
|
1053 |
#define UCMODE_0 (0x00) /* Sync. Mode: USCI Mode: 0 */
|
|
|
1054 |
#define UCMODE_1 (0x02) /* Sync. Mode: USCI Mode: 1 */
|
|
|
1055 |
#define UCMODE_2 (0x04) /* Sync. Mode: USCI Mode: 2 */
|
|
|
1056 |
#define UCMODE_3 (0x06) /* Sync. Mode: USCI Mode: 3 */
|
|
|
1057 |
|
|
|
1058 |
// UART-Mode Bits
|
|
|
1059 |
#define UCSSEL1 (0x80) /* USCI 0 Clock Source Select 1 */
|
|
|
1060 |
#define UCSSEL0 (0x40) /* USCI 0 Clock Source Select 0 */
|
|
|
1061 |
#define UCRXEIE (0x20) /* RX Error interrupt enable */
|
|
|
1062 |
#define UCBRKIE (0x10) /* Break interrupt enable */
|
|
|
1063 |
#define UCDORM (0x08) /* Dormant (Sleep) Mode */
|
|
|
1064 |
#define UCTXADDR (0x04) /* Send next Data as Address */
|
|
|
1065 |
#define UCTXBRK (0x02) /* Send next Data as Break */
|
|
|
1066 |
#define UCSWRST (0x01) /* USCI Software Reset */
|
|
|
1067 |
|
|
|
1068 |
// SPI-Mode Bits
|
|
|
1069 |
//#define res (0x20) /* reserved */
|
|
|
1070 |
//#define res (0x10) /* reserved */
|
|
|
1071 |
//#define res (0x08) /* reserved */
|
|
|
1072 |
//#define res (0x04) /* reserved */
|
|
|
1073 |
//#define res (0x02) /* reserved */
|
|
|
1074 |
|
|
|
1075 |
// I2C-Mode Bits
|
|
|
1076 |
//#define res (0x20) /* reserved */
|
|
|
1077 |
#define UCTR (0x10) /* Transmit/Receive Select/Flag */
|
|
|
1078 |
#define UCTXNACK (0x08) /* Transmit NACK */
|
|
|
1079 |
#define UCTXSTP (0x04) /* Transmit STOP */
|
|
|
1080 |
#define UCTXSTT (0x02) /* Transmit START */
|
|
|
1081 |
#define UCSSEL_0 (0x00) /* USCI 0 Clock Source: 0 */
|
|
|
1082 |
#define UCSSEL_1 (0x40) /* USCI 0 Clock Source: 1 */
|
|
|
1083 |
#define UCSSEL_2 (0x80) /* USCI 0 Clock Source: 2 */
|
|
|
1084 |
#define UCSSEL_3 (0xC0) /* USCI 0 Clock Source: 3 */
|
|
|
1085 |
|
|
|
1086 |
#define UCBRF3 (0x80) /* USCI First Stage Modulation Select 3 */
|
|
|
1087 |
#define UCBRF2 (0x40) /* USCI First Stage Modulation Select 2 */
|
|
|
1088 |
#define UCBRF1 (0x20) /* USCI First Stage Modulation Select 1 */
|
|
|
1089 |
#define UCBRF0 (0x10) /* USCI First Stage Modulation Select 0 */
|
|
|
1090 |
#define UCBRS2 (0x08) /* USCI Second Stage Modulation Select 2 */
|
|
|
1091 |
#define UCBRS1 (0x04) /* USCI Second Stage Modulation Select 1 */
|
|
|
1092 |
#define UCBRS0 (0x02) /* USCI Second Stage Modulation Select 0 */
|
|
|
1093 |
#define UCOS16 (0x01) /* USCI 16-times Oversampling enable */
|
|
|
1094 |
|
|
|
1095 |
#define UCBRF_0 (0x00) /* USCI First Stage Modulation: 0 */
|
|
|
1096 |
#define UCBRF_1 (0x10) /* USCI First Stage Modulation: 1 */
|
|
|
1097 |
#define UCBRF_2 (0x20) /* USCI First Stage Modulation: 2 */
|
|
|
1098 |
#define UCBRF_3 (0x30) /* USCI First Stage Modulation: 3 */
|
|
|
1099 |
#define UCBRF_4 (0x40) /* USCI First Stage Modulation: 4 */
|
|
|
1100 |
#define UCBRF_5 (0x50) /* USCI First Stage Modulation: 5 */
|
|
|
1101 |
#define UCBRF_6 (0x60) /* USCI First Stage Modulation: 6 */
|
|
|
1102 |
#define UCBRF_7 (0x70) /* USCI First Stage Modulation: 7 */
|
|
|
1103 |
#define UCBRF_8 (0x80) /* USCI First Stage Modulation: 8 */
|
|
|
1104 |
#define UCBRF_9 (0x90) /* USCI First Stage Modulation: 9 */
|
|
|
1105 |
#define UCBRF_10 (0xA0) /* USCI First Stage Modulation: A */
|
|
|
1106 |
#define UCBRF_11 (0xB0) /* USCI First Stage Modulation: B */
|
|
|
1107 |
#define UCBRF_12 (0xC0) /* USCI First Stage Modulation: C */
|
|
|
1108 |
#define UCBRF_13 (0xD0) /* USCI First Stage Modulation: D */
|
|
|
1109 |
#define UCBRF_14 (0xE0) /* USCI First Stage Modulation: E */
|
|
|
1110 |
#define UCBRF_15 (0xF0) /* USCI First Stage Modulation: F */
|
|
|
1111 |
|
|
|
1112 |
#define UCBRS_0 (0x00) /* USCI Second Stage Modulation: 0 */
|
|
|
1113 |
#define UCBRS_1 (0x02) /* USCI Second Stage Modulation: 1 */
|
|
|
1114 |
#define UCBRS_2 (0x04) /* USCI Second Stage Modulation: 2 */
|
|
|
1115 |
#define UCBRS_3 (0x06) /* USCI Second Stage Modulation: 3 */
|
|
|
1116 |
#define UCBRS_4 (0x08) /* USCI Second Stage Modulation: 4 */
|
|
|
1117 |
#define UCBRS_5 (0x0A) /* USCI Second Stage Modulation: 5 */
|
|
|
1118 |
#define UCBRS_6 (0x0C) /* USCI Second Stage Modulation: 6 */
|
|
|
1119 |
#define UCBRS_7 (0x0E) /* USCI Second Stage Modulation: 7 */
|
|
|
1120 |
|
|
|
1121 |
#define UCLISTEN (0x80) /* USCI Listen mode */
|
|
|
1122 |
#define UCFE (0x40) /* USCI Frame Error Flag */
|
|
|
1123 |
#define UCOE (0x20) /* USCI Overrun Error Flag */
|
|
|
1124 |
#define UCPE (0x10) /* USCI Parity Error Flag */
|
|
|
1125 |
#define UCBRK (0x08) /* USCI Break received */
|
|
|
1126 |
#define UCRXERR (0x04) /* USCI RX Error Flag */
|
|
|
1127 |
#define UCADDR (0x02) /* USCI Address received Flag */
|
|
|
1128 |
#define UCBUSY (0x01) /* USCI Busy Flag */
|
|
|
1129 |
#define UCIDLE (0x02) /* USCI Idle line detected Flag */
|
|
|
1130 |
|
|
|
1131 |
//#define res (0x80) /* reserved */
|
|
|
1132 |
//#define res (0x40) /* reserved */
|
|
|
1133 |
//#define res (0x20) /* reserved */
|
|
|
1134 |
//#define res (0x10) /* reserved */
|
|
|
1135 |
#define UCNACKIE (0x08) /* NACK Condition interrupt enable */
|
|
|
1136 |
#define UCSTPIE (0x04) /* STOP Condition interrupt enable */
|
|
|
1137 |
#define UCSTTIE (0x02) /* START Condition interrupt enable */
|
|
|
1138 |
#define UCALIE (0x01) /* Arbitration Lost interrupt enable */
|
|
|
1139 |
|
|
|
1140 |
#define UCSCLLOW (0x40) /* SCL low */
|
|
|
1141 |
#define UCGC (0x20) /* General Call address received Flag */
|
|
|
1142 |
#define UCBBUSY (0x10) /* Bus Busy Flag */
|
|
|
1143 |
#define UCNACKIFG (0x08) /* NAK Condition interrupt Flag */
|
|
|
1144 |
#define UCSTPIFG (0x04) /* STOP Condition interrupt Flag */
|
|
|
1145 |
#define UCSTTIFG (0x02) /* START Condition interrupt Flag */
|
|
|
1146 |
#define UCALIFG (0x01) /* Arbitration Lost interrupt Flag */
|
|
|
1147 |
|
|
|
1148 |
#define UCIRTXPL5 (0x80) /* IRDA Transmit Pulse Length 5 */
|
|
|
1149 |
#define UCIRTXPL4 (0x40) /* IRDA Transmit Pulse Length 4 */
|
|
|
1150 |
#define UCIRTXPL3 (0x20) /* IRDA Transmit Pulse Length 3 */
|
|
|
1151 |
#define UCIRTXPL2 (0x10) /* IRDA Transmit Pulse Length 2 */
|
|
|
1152 |
#define UCIRTXPL1 (0x08) /* IRDA Transmit Pulse Length 1 */
|
|
|
1153 |
#define UCIRTXPL0 (0x04) /* IRDA Transmit Pulse Length 0 */
|
|
|
1154 |
#define UCIRTXCLK (0x02) /* IRDA Transmit Pulse Clock Select */
|
|
|
1155 |
#define UCIREN (0x01) /* IRDA Encoder/Decoder enable */
|
|
|
1156 |
|
|
|
1157 |
#define UCIRRXFL5 (0x80) /* IRDA Receive Filter Length 5 */
|
|
|
1158 |
#define UCIRRXFL4 (0x40) /* IRDA Receive Filter Length 4 */
|
|
|
1159 |
#define UCIRRXFL3 (0x20) /* IRDA Receive Filter Length 3 */
|
|
|
1160 |
#define UCIRRXFL2 (0x10) /* IRDA Receive Filter Length 2 */
|
|
|
1161 |
#define UCIRRXFL1 (0x08) /* IRDA Receive Filter Length 1 */
|
|
|
1162 |
#define UCIRRXFL0 (0x04) /* IRDA Receive Filter Length 0 */
|
|
|
1163 |
#define UCIRRXPL (0x02) /* IRDA Receive Input Polarity */
|
|
|
1164 |
#define UCIRRXFE (0x01) /* IRDA Receive Filter enable */
|
|
|
1165 |
|
|
|
1166 |
//#define res (0x80) /* reserved */
|
|
|
1167 |
//#define res (0x40) /* reserved */
|
|
|
1168 |
#define UCDELIM1 (0x20) /* Break Sync Delimiter 1 */
|
|
|
1169 |
#define UCDELIM0 (0x10) /* Break Sync Delimiter 0 */
|
|
|
1170 |
#define UCSTOE (0x08) /* Sync-Field Timeout error */
|
|
|
1171 |
#define UCBTOE (0x04) /* Break Timeout error */
|
|
|
1172 |
//#define res (0x02) /* reserved */
|
|
|
1173 |
#define UCABDEN (0x01) /* Auto Baud Rate detect enable */
|
|
|
1174 |
|
|
|
1175 |
#define UCGCEN (0x8000) /* I2C General Call enable */
|
|
|
1176 |
#define UCOA9 (0x0200) /* I2C Own Address 9 */
|
|
|
1177 |
#define UCOA8 (0x0100) /* I2C Own Address 8 */
|
|
|
1178 |
#define UCOA7 (0x0080) /* I2C Own Address 7 */
|
|
|
1179 |
#define UCOA6 (0x0040) /* I2C Own Address 6 */
|
|
|
1180 |
#define UCOA5 (0x0020) /* I2C Own Address 5 */
|
|
|
1181 |
#define UCOA4 (0x0010) /* I2C Own Address 4 */
|
|
|
1182 |
#define UCOA3 (0x0008) /* I2C Own Address 3 */
|
|
|
1183 |
#define UCOA2 (0x0004) /* I2C Own Address 2 */
|
|
|
1184 |
#define UCOA1 (0x0002) /* I2C Own Address 1 */
|
|
|
1185 |
#define UCOA0 (0x0001) /* I2C Own Address 0 */
|
|
|
1186 |
|
|
|
1187 |
#define UCSA9 (0x0200) /* I2C Slave Address 9 */
|
|
|
1188 |
#define UCSA8 (0x0100) /* I2C Slave Address 8 */
|
|
|
1189 |
#define UCSA7 (0x0080) /* I2C Slave Address 7 */
|
|
|
1190 |
#define UCSA6 (0x0040) /* I2C Slave Address 6 */
|
|
|
1191 |
#define UCSA5 (0x0020) /* I2C Slave Address 5 */
|
|
|
1192 |
#define UCSA4 (0x0010) /* I2C Slave Address 4 */
|
|
|
1193 |
#define UCSA3 (0x0008) /* I2C Slave Address 3 */
|
|
|
1194 |
#define UCSA2 (0x0004) /* I2C Slave Address 2 */
|
|
|
1195 |
#define UCSA1 (0x0002) /* I2C Slave Address 1 */
|
|
|
1196 |
#define UCSA0 (0x0001) /* I2C Slave Address 0 */
|
|
|
1197 |
|
|
|
1198 |
/************************************************************
|
|
|
1199 |
* WATCHDOG TIMER
|
|
|
1200 |
************************************************************/
|
|
|
1201 |
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
|
|
|
1202 |
|
|
|
1203 |
SFR_16BIT(WDTCTL); /* Watchdog Timer Control */
|
|
|
1204 |
/* The bit names have been prefixed with "WDT" */
|
|
|
1205 |
#define WDTIS0 (0x0001)
|
|
|
1206 |
#define WDTIS1 (0x0002)
|
|
|
1207 |
#define WDTSSEL (0x0004)
|
|
|
1208 |
#define WDTCNTCL (0x0008)
|
|
|
1209 |
#define WDTTMSEL (0x0010)
|
|
|
1210 |
#define WDTNMI (0x0020)
|
|
|
1211 |
#define WDTNMIES (0x0040)
|
|
|
1212 |
#define WDTHOLD (0x0080)
|
|
|
1213 |
|
|
|
1214 |
#define WDTPW (0x5A00)
|
|
|
1215 |
|
|
|
1216 |
/* WDT-interval times [1ms] coded with Bits 0-2 */
|
|
|
1217 |
/* WDT is clocked by fSMCLK (assumed 1MHz) */
|
|
|
1218 |
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
|
|
|
1219 |
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
|
|
|
1220 |
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
|
|
|
1221 |
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
|
|
|
1222 |
/* WDT is clocked by fACLK (assumed 32KHz) */
|
|
|
1223 |
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
|
|
|
1224 |
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
|
|
|
1225 |
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
|
|
|
1226 |
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
|
|
|
1227 |
/* Watchdog mode -> reset after expired time */
|
|
|
1228 |
/* WDT is clocked by fSMCLK (assumed 1MHz) */
|
|
|
1229 |
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
|
|
|
1230 |
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
|
|
|
1231 |
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
|
|
|
1232 |
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
|
|
|
1233 |
/* WDT is clocked by fACLK (assumed 32KHz) */
|
|
|
1234 |
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
|
|
|
1235 |
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
|
|
|
1236 |
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
|
|
|
1237 |
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
|
|
|
1238 |
|
|
|
1239 |
/* INTERRUPT CONTROL */
|
|
|
1240 |
/* These two bits are defined in the Special Function Registers */
|
|
|
1241 |
/* #define WDTIE 0x01 */
|
|
|
1242 |
/* #define WDTIFG 0x01 */
|
|
|
1243 |
|
|
|
1244 |
/************************************************************
|
|
|
1245 |
* Interrupt Vectors (offset from 0xFFE0)
|
|
|
1246 |
************************************************************/
|
|
|
1247 |
|
|
|
1248 |
#define VECTOR_NAME(name) name##_ptr
|
|
|
1249 |
#define EMIT_PRAGMA(x) _Pragma(#x)
|
|
|
1250 |
#define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name
|
|
|
1251 |
#define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section))
|
|
|
1252 |
#define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \
|
|
|
1253 |
PLACE_VECTOR(VECTOR_NAME(func), offset)
|
|
|
1254 |
|
|
|
1255 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1256 |
#define BASICTIMER_VECTOR ".int00" /* 0xFFE0 Basic Timer */
|
|
|
1257 |
#else
|
|
|
1258 |
#define BASICTIMER_VECTOR (0 * 1u) /* 0xFFE0 Basic Timer */
|
|
|
1259 |
/*#define BASICTIMER_ISR(func) ISR_VECTOR(func, ".int00") */ /* 0xFFE0 Basic Timer */ /* CCE V2 Style */
|
|
|
1260 |
#endif
|
|
|
1261 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1262 |
#define PORT2_VECTOR ".int01" /* 0xFFE2 Port 2 */
|
|
|
1263 |
#else
|
|
|
1264 |
#define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 */
|
|
|
1265 |
/*#define PORT2_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Port 2 */ /* CCE V2 Style */
|
|
|
1266 |
#endif
|
|
|
1267 |
|
|
|
1268 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1269 |
#define DAC12_DMA_VECTOR ".int03" /* 0xFFE6 DAC 12 */
|
|
|
1270 |
#else
|
|
|
1271 |
#define DAC12_DMA_VECTOR (3 * 1u) /* 0xFFE6 DAC 12 */
|
|
|
1272 |
/*#define DAC12_DMA_ISR(func) ISR_VECTOR(func, ".int03") */ /* 0xFFE6 DAC 12 */ /* CCE V2 Style */
|
|
|
1273 |
#endif
|
|
|
1274 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1275 |
#define PORT1_VECTOR ".int04" /* 0xFFE8 Port 1 */
|
|
|
1276 |
#else
|
|
|
1277 |
#define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 */
|
|
|
1278 |
/*#define PORT1_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Port 1 */ /* CCE V2 Style */
|
|
|
1279 |
#endif
|
|
|
1280 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1281 |
#define TIMERA1_VECTOR ".int05" /* 0xFFEA Timer A CC1-2, TA */
|
|
|
1282 |
#else
|
|
|
1283 |
#define TIMERA1_VECTOR (5 * 1u) /* 0xFFEA Timer A CC1-2, TA */
|
|
|
1284 |
/*#define TIMERA1_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFEA Timer A CC1-2, TA */ /* CCE V2 Style */
|
|
|
1285 |
#endif
|
|
|
1286 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1287 |
#define TIMERA0_VECTOR ".int06" /* 0xFFEC Timer A CC0 */
|
|
|
1288 |
#else
|
|
|
1289 |
#define TIMERA0_VECTOR (6 * 1u) /* 0xFFEC Timer A CC0 */
|
|
|
1290 |
/*#define TIMERA0_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC Timer A CC0 */ /* CCE V2 Style */
|
|
|
1291 |
#endif
|
|
|
1292 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1293 |
#define SD16A_VECTOR ".int07" /* 0xFFEE ADC SD16A */
|
|
|
1294 |
#else
|
|
|
1295 |
#define SD16A_VECTOR (7 * 1u) /* 0xFFEE ADC SD16A */
|
|
|
1296 |
/*#define SD16A_ISR(func) ISR_VECTOR(func, ".int07") */ /* 0xFFEE ADC SD16A */ /* CCE V2 Style */
|
|
|
1297 |
#endif
|
|
|
1298 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1299 |
#define USCIAB0TX_VECTOR ".int08" /* 0xFFF0 USCI A0/B0 Transmit */
|
|
|
1300 |
#else
|
|
|
1301 |
#define USCIAB0TX_VECTOR (8 * 1u) /* 0xFFF0 USCI A0/B0 Transmit */
|
|
|
1302 |
/*#define USCIAB0TX_ISR(func) ISR_VECTOR(func, ".int08") */ /* 0xFFF0 USCI A0/B0 Transmit */ /* CCE V2 Style */
|
|
|
1303 |
#endif
|
|
|
1304 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1305 |
#define USCIAB0RX_VECTOR ".int09" /* 0xFFF2 USCI A0/B0 Receive */
|
|
|
1306 |
#else
|
|
|
1307 |
#define USCIAB0RX_VECTOR (9 * 1u) /* 0xFFF2 USCI A0/B0 Receive */
|
|
|
1308 |
/*#define USCIAB0RX_ISR(func) ISR_VECTOR(func, ".int09") */ /* 0xFFF2 USCI A0/B0 Receive */ /* CCE V2 Style */
|
|
|
1309 |
#endif
|
|
|
1310 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1311 |
#define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */
|
|
|
1312 |
#else
|
|
|
1313 |
#define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */
|
|
|
1314 |
/*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */
|
|
|
1315 |
#endif
|
|
|
1316 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1317 |
#define COMPARATORA_VECTOR ".int11" /* 0xFFF6 Comparator A */
|
|
|
1318 |
#else
|
|
|
1319 |
#define COMPARATORA_VECTOR (11 * 1u) /* 0xFFF6 Comparator A */
|
|
|
1320 |
/*#define COMPARATORA_ISR(func) ISR_VECTOR(func, ".int11") */ /* 0xFFF6 Comparator A */ /* CCE V2 Style */
|
|
|
1321 |
#endif
|
|
|
1322 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1323 |
#define TIMERB1_VECTOR ".int12" /* 0xFFF8 Timer B CC1-2, TB */
|
|
|
1324 |
#else
|
|
|
1325 |
#define TIMERB1_VECTOR (12 * 1u) /* 0xFFF8 Timer B CC1-2, TB */
|
|
|
1326 |
/*#define TIMERB1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Timer B CC1-2, TB */ /* CCE V2 Style */
|
|
|
1327 |
#endif
|
|
|
1328 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1329 |
#define TIMERB0_VECTOR ".int13" /* 0xFFFA Timer B CC0 */
|
|
|
1330 |
#else
|
|
|
1331 |
#define TIMERB0_VECTOR (13 * 1u) /* 0xFFFA Timer B CC0 */
|
|
|
1332 |
/*#define TIMERB0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Timer B CC0 */ /* CCE V2 Style */
|
|
|
1333 |
#endif
|
|
|
1334 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1335 |
#define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */
|
|
|
1336 |
#else
|
|
|
1337 |
#define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */
|
|
|
1338 |
/*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */
|
|
|
1339 |
#endif
|
|
|
1340 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
1341 |
#define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */
|
|
|
1342 |
#else
|
|
|
1343 |
#define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */
|
|
|
1344 |
/*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */
|
|
|
1345 |
#endif
|
|
|
1346 |
|
|
|
1347 |
/************************************************************
|
|
|
1348 |
* End of Modules
|
|
|
1349 |
************************************************************/
|
|
|
1350 |
|
|
|
1351 |
#ifdef __cplusplus
|
|
|
1352 |
}
|
|
|
1353 |
#endif /* extern "C" */
|
|
|
1354 |
|
|
|
1355 |
#endif /* #ifndef __msp430x47x */
|
|
|
1356 |
|