| 2850 |
dpurdie |
1 |
/********************************************************************
|
|
|
2 |
*
|
|
|
3 |
* Standard register and bit definitions for the Texas Instruments
|
|
|
4 |
* MSP430 microcontroller.
|
|
|
5 |
*
|
|
|
6 |
* This file supports assembler and C development for
|
|
|
7 |
* MSP430x33x devices.
|
|
|
8 |
*
|
|
|
9 |
* Texas Instruments, Version 2.3
|
|
|
10 |
*
|
|
|
11 |
* Rev. 1.2, Added definition of USPIE.
|
|
|
12 |
*
|
|
|
13 |
* Rev. 1.3, Removed leading 0 to aviod interpretation as octal
|
|
|
14 |
* values under C
|
|
|
15 |
* Changed definition of LPM4 bits (device effect not changed)
|
|
|
16 |
* Corrected LPMx_EXIT to reference new intrinsic _bic_SR_register_on_exit
|
|
|
17 |
* The file contents were reordered
|
|
|
18 |
* Changed TAIV to be read-only
|
|
|
19 |
* Rev. 1.4, Enclose all #define statements with parentheses
|
|
|
20 |
* Rev. 1.5, Added sfrb for TCDAT and TCPLD
|
|
|
21 |
* Rev. 1.6, Defined vectors for USART (in addition to UART)
|
|
|
22 |
* Rev. 1.7, Removed incorrect label 'BTRESET'
|
|
|
23 |
* Rev. 2.1, Alignment of defintions in Users Guide and of version numbers
|
|
|
24 |
* Rev. 2.2, Removed unused def of TASSEL2
|
|
|
25 |
* Rev. 2.3, Removed definitions for BTRESET
|
|
|
26 |
*
|
|
|
27 |
********************************************************************/
|
|
|
28 |
|
|
|
29 |
#ifndef __msp430x33x
|
|
|
30 |
#define __msp430x33x
|
|
|
31 |
|
|
|
32 |
#ifdef __cplusplus
|
|
|
33 |
extern "C" {
|
|
|
34 |
#endif
|
|
|
35 |
|
|
|
36 |
|
|
|
37 |
/*----------------------------------------------------------------------------*/
|
|
|
38 |
/* PERIPHERAL FILE MAP */
|
|
|
39 |
/*----------------------------------------------------------------------------*/
|
|
|
40 |
|
|
|
41 |
/* External references resolved by a device-specific linker command file */
|
|
|
42 |
#define SFR_8BIT(address) extern volatile unsigned char address
|
|
|
43 |
#define SFR_16BIT(address) extern volatile unsigned int address
|
|
|
44 |
|
|
|
45 |
|
|
|
46 |
/************************************************************
|
|
|
47 |
* STANDARD BITS
|
|
|
48 |
************************************************************/
|
|
|
49 |
|
|
|
50 |
#define BIT0 (0x0001)
|
|
|
51 |
#define BIT1 (0x0002)
|
|
|
52 |
#define BIT2 (0x0004)
|
|
|
53 |
#define BIT3 (0x0008)
|
|
|
54 |
#define BIT4 (0x0010)
|
|
|
55 |
#define BIT5 (0x0020)
|
|
|
56 |
#define BIT6 (0x0040)
|
|
|
57 |
#define BIT7 (0x0080)
|
|
|
58 |
#define BIT8 (0x0100)
|
|
|
59 |
#define BIT9 (0x0200)
|
|
|
60 |
#define BITA (0x0400)
|
|
|
61 |
#define BITB (0x0800)
|
|
|
62 |
#define BITC (0x1000)
|
|
|
63 |
#define BITD (0x2000)
|
|
|
64 |
#define BITE (0x4000)
|
|
|
65 |
#define BITF (0x8000)
|
|
|
66 |
|
|
|
67 |
/************************************************************
|
|
|
68 |
* STATUS REGISTER BITS
|
|
|
69 |
************************************************************/
|
|
|
70 |
|
|
|
71 |
#define C (0x0001)
|
|
|
72 |
#define Z (0x0002)
|
|
|
73 |
#define N (0x0004)
|
|
|
74 |
#define V (0x0100)
|
|
|
75 |
#define GIE (0x0008)
|
|
|
76 |
#define CPUOFF (0x0010)
|
|
|
77 |
#define OSCOFF (0x0020)
|
|
|
78 |
#define SCG0 (0x0040)
|
|
|
79 |
#define SCG1 (0x0080)
|
|
|
80 |
|
|
|
81 |
/* Low Power Modes coded with Bits 4-7 in SR */
|
|
|
82 |
|
|
|
83 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
84 |
#define LPM0 (CPUOFF)
|
|
|
85 |
#define LPM1 (SCG0+CPUOFF)
|
|
|
86 |
#define LPM2 (SCG1+CPUOFF)
|
|
|
87 |
#define LPM3 (SCG1+SCG0+CPUOFF)
|
|
|
88 |
#define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF)
|
|
|
89 |
/* End #defines for assembler */
|
|
|
90 |
|
|
|
91 |
#else /* Begin #defines for C */
|
|
|
92 |
#define LPM0_bits (CPUOFF)
|
|
|
93 |
#define LPM1_bits (SCG0+CPUOFF)
|
|
|
94 |
#define LPM2_bits (SCG1+CPUOFF)
|
|
|
95 |
#define LPM3_bits (SCG1+SCG0+CPUOFF)
|
|
|
96 |
#define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF)
|
|
|
97 |
|
|
|
98 |
#include "in430.h"
|
|
|
99 |
|
|
|
100 |
#define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */
|
|
|
101 |
#define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */
|
|
|
102 |
#define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */
|
|
|
103 |
#define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */
|
|
|
104 |
#define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */
|
|
|
105 |
#define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */
|
|
|
106 |
#define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */
|
|
|
107 |
#define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */
|
|
|
108 |
#define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */
|
|
|
109 |
#define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */
|
|
|
110 |
#endif /* End #defines for C */
|
|
|
111 |
|
|
|
112 |
/************************************************************
|
|
|
113 |
* PERIPHERAL FILE MAP
|
|
|
114 |
************************************************************/
|
|
|
115 |
|
|
|
116 |
/************************************************************
|
|
|
117 |
* SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS
|
|
|
118 |
************************************************************/
|
|
|
119 |
|
|
|
120 |
SFR_8BIT(IE1); /* Interrupt Enable 1 */
|
|
|
121 |
#define WDTIE (0x01)
|
|
|
122 |
#define OFIE (0x02)
|
|
|
123 |
#define P0IE_0 (0x04)
|
|
|
124 |
#define P0IE_1 (0x08)
|
|
|
125 |
|
|
|
126 |
SFR_8BIT(IFG1); /* Interrupt Flag 1 */
|
|
|
127 |
#define WDTIFG (0x01)
|
|
|
128 |
#define OFIFG (0x02)
|
|
|
129 |
#define P0IFG_0 (0x04)
|
|
|
130 |
#define P0IFG_1 (0x08)
|
|
|
131 |
#define NMIIFG (0x10)
|
|
|
132 |
|
|
|
133 |
SFR_8BIT(IE2); /* Interrupt Enable 2 */
|
|
|
134 |
#define URXIE (0x01)
|
|
|
135 |
#define UTXIE (0x02)
|
|
|
136 |
#define TPIE (0x08)
|
|
|
137 |
#define BTIE (0x80)
|
|
|
138 |
|
|
|
139 |
SFR_8BIT(IFG2); /* Interrupt Flag 2 */
|
|
|
140 |
#define URXIFG (0x01)
|
|
|
141 |
#define UTXIFG (0x02)
|
|
|
142 |
#define BTIFG (0x80)
|
|
|
143 |
|
|
|
144 |
SFR_8BIT(ME2); /* Module Enable 2 */
|
|
|
145 |
#define URXE (0x01)
|
|
|
146 |
#define USPIE (0x01)
|
|
|
147 |
#define UTXE (0x02)
|
|
|
148 |
|
|
|
149 |
/************************************************************
|
|
|
150 |
* WATCHDOG TIMER
|
|
|
151 |
************************************************************/
|
|
|
152 |
#define __MSP430_HAS_WDT__ /* Definition to show that Module is available */
|
|
|
153 |
|
|
|
154 |
SFR_16BIT(WDTCTL); /* Watchdog Timer Control */
|
|
|
155 |
/* The bit names have been prefixed with "WDT" */
|
|
|
156 |
#define WDTIS0 (0x0001)
|
|
|
157 |
#define WDTIS1 (0x0002)
|
|
|
158 |
#define WDTSSEL (0x0004)
|
|
|
159 |
#define WDTCNTCL (0x0008)
|
|
|
160 |
#define WDTTMSEL (0x0010)
|
|
|
161 |
#define WDTNMI (0x0020)
|
|
|
162 |
#define WDTNMIES (0x0040)
|
|
|
163 |
#define WDTHOLD (0x0080)
|
|
|
164 |
|
|
|
165 |
#define WDTPW (0x5A00)
|
|
|
166 |
|
|
|
167 |
/* WDT-interval times [1ms] coded with Bits 0-2 */
|
|
|
168 |
/* WDT is clocked by fSMCLK (assumed 1MHz) */
|
|
|
169 |
#define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */
|
|
|
170 |
#define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */
|
|
|
171 |
#define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */
|
|
|
172 |
#define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
|
|
|
173 |
/* WDT is clocked by fACLK (assumed 32KHz) */
|
|
|
174 |
#define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */
|
|
|
175 |
#define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
|
|
|
176 |
#define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
|
|
|
177 |
#define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
|
|
|
178 |
/* Watchdog mode -> reset after expired time */
|
|
|
179 |
/* WDT is clocked by fSMCLK (assumed 1MHz) */
|
|
|
180 |
#define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */
|
|
|
181 |
#define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */
|
|
|
182 |
#define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */
|
|
|
183 |
#define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */
|
|
|
184 |
/* WDT is clocked by fACLK (assumed 32KHz) */
|
|
|
185 |
#define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */
|
|
|
186 |
#define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */
|
|
|
187 |
#define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */
|
|
|
188 |
#define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */
|
|
|
189 |
|
|
|
190 |
/* INTERRUPT CONTROL */
|
|
|
191 |
/* These two bits are defined in the Special Function Registers */
|
|
|
192 |
/* #define WDTIE 0x01 */
|
|
|
193 |
/* #define WDTIFG 0x01 */
|
|
|
194 |
|
|
|
195 |
/************************************************************
|
|
|
196 |
* HARDWARE MULTIPLIER
|
|
|
197 |
************************************************************/
|
|
|
198 |
#define __MSP430_HAS_MPY__ /* Definition to show that Module is available */
|
|
|
199 |
|
|
|
200 |
SFR_16BIT(MPY); /* Multiply Unsigned/Operand 1 */
|
|
|
201 |
SFR_16BIT(MPYS); /* Multiply Signed/Operand 1 */
|
|
|
202 |
SFR_16BIT(MAC); /* Multiply Unsigned and Accumulate/Operand 1 */
|
|
|
203 |
SFR_16BIT(MACS); /* Multiply Signed and Accumulate/Operand 1 */
|
|
|
204 |
SFR_16BIT(OP2); /* Operand 2 */
|
|
|
205 |
SFR_16BIT(RESLO); /* Result Low Word */
|
|
|
206 |
SFR_16BIT(RESHI); /* Result High Word */
|
|
|
207 |
SFR_16BIT(SUMEXT); /* Sum Extend */
|
|
|
208 |
|
|
|
209 |
/************************************************************
|
|
|
210 |
* DIGITAL I/O PORT0
|
|
|
211 |
************************************************************/
|
|
|
212 |
#define __MSP430_HAS_PORT0__ /* Definition to show that Module is available */
|
|
|
213 |
|
|
|
214 |
SFR_8BIT(P0IN); /* Port 0 Input */
|
|
|
215 |
#define P0IN_0 (0x01)
|
|
|
216 |
#define P0IN_1 (0x02)
|
|
|
217 |
#define P0IN_2 (0x04)
|
|
|
218 |
#define P0IN_3 (0x08)
|
|
|
219 |
#define P0IN_4 (0x10)
|
|
|
220 |
#define P0IN_5 (0x20)
|
|
|
221 |
#define P0IN_6 (0x40)
|
|
|
222 |
#define P0IN_7 (0x80)
|
|
|
223 |
|
|
|
224 |
SFR_8BIT(P0OUT); /* Port 0 Output */
|
|
|
225 |
#define P0OUT_0 (0x01)
|
|
|
226 |
#define P0OUT_1 (0x02)
|
|
|
227 |
#define P0OUT_2 (0x04)
|
|
|
228 |
#define P0OUT_3 (0x08)
|
|
|
229 |
#define P0OUT_4 (0x10)
|
|
|
230 |
#define P0OUT_5 (0x20)
|
|
|
231 |
#define P0OUT_6 (0x40)
|
|
|
232 |
#define P0OUT_7 (0x80)
|
|
|
233 |
|
|
|
234 |
SFR_8BIT(P0DIR); /* Port 0 Direction */
|
|
|
235 |
#define P0DIR_0 (0x01)
|
|
|
236 |
#define P0DIR_1 (0x02)
|
|
|
237 |
#define P0DIR_2 (0x04)
|
|
|
238 |
#define P0DIR_3 (0x08)
|
|
|
239 |
#define P0DIR_4 (0x10)
|
|
|
240 |
#define P0DIR_5 (0x20)
|
|
|
241 |
#define P0DIR_6 (0x40)
|
|
|
242 |
#define P0DIR_7 (0x80)
|
|
|
243 |
|
|
|
244 |
SFR_8BIT(P0IFG); /* Port 0 Interrupt Flag */
|
|
|
245 |
/* These two bits are defined in Interrupt Flag 1 */
|
|
|
246 |
/* #define P0IFG_0 0x01 */
|
|
|
247 |
/* #define P0IFG_1 0x02 */
|
|
|
248 |
#define P0IFG_2 (0x04)
|
|
|
249 |
#define P0IFG_3 (0x08)
|
|
|
250 |
#define P0IFG_4 (0x10)
|
|
|
251 |
#define P0IFG_5 (0x20)
|
|
|
252 |
#define P0IFG_6 (0x40)
|
|
|
253 |
#define P0IFG_7 (0x80)
|
|
|
254 |
|
|
|
255 |
SFR_8BIT(P0IES); /* Port 0 Interrupt Edge Select */
|
|
|
256 |
#define P0IES_0 (0x01)
|
|
|
257 |
#define P0IES_1 (0x02)
|
|
|
258 |
#define P0IES_2 (0x04)
|
|
|
259 |
#define P0IES_3 (0x08)
|
|
|
260 |
#define P0IES_4 (0x10)
|
|
|
261 |
#define P0IES_5 (0x20)
|
|
|
262 |
#define P0IES_6 (0x40)
|
|
|
263 |
#define P0IES_7 (0x80)
|
|
|
264 |
|
|
|
265 |
SFR_8BIT(P0IE); /* Port 0 Interrupt Enable */
|
|
|
266 |
/* These two bits are defined in Interrupt Enable 1 */
|
|
|
267 |
/* #define P0IE_0 0x01 */
|
|
|
268 |
/* #define P0IE_1 0x02 */
|
|
|
269 |
#define P0IE_2 (0x04)
|
|
|
270 |
#define P0IE_3 (0x08)
|
|
|
271 |
#define P0IE_4 (0x10)
|
|
|
272 |
#define P0IE_5 (0x20)
|
|
|
273 |
#define P0IE_6 (0x40)
|
|
|
274 |
#define P0IE_7 (0x80)
|
|
|
275 |
|
|
|
276 |
/************************************************************
|
|
|
277 |
* DIGITAL I/O Port1/2
|
|
|
278 |
************************************************************/
|
|
|
279 |
#define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */
|
|
|
280 |
#define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */
|
|
|
281 |
|
|
|
282 |
SFR_8BIT(P1IN); /* Port 1 Input */
|
|
|
283 |
SFR_8BIT(P1OUT); /* Port 1 Output */
|
|
|
284 |
SFR_8BIT(P1DIR); /* Port 1 Direction */
|
|
|
285 |
SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */
|
|
|
286 |
SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */
|
|
|
287 |
SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */
|
|
|
288 |
SFR_8BIT(P1SEL); /* Port 1 Selection */
|
|
|
289 |
|
|
|
290 |
SFR_8BIT(P2IN); /* Port 2 Input */
|
|
|
291 |
SFR_8BIT(P2OUT); /* Port 2 Output */
|
|
|
292 |
SFR_8BIT(P2DIR); /* Port 2 Direction */
|
|
|
293 |
SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */
|
|
|
294 |
SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */
|
|
|
295 |
SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */
|
|
|
296 |
SFR_8BIT(P2SEL); /* Port 2 Selection */
|
|
|
297 |
|
|
|
298 |
/************************************************************
|
|
|
299 |
* DIGITAL I/O Port3/4
|
|
|
300 |
************************************************************/
|
|
|
301 |
#define __MSP430_HAS_PORT3__ /* Definition to show that Module is available */
|
|
|
302 |
#define __MSP430_HAS_PORT4__ /* Definition to show that Module is available */
|
|
|
303 |
|
|
|
304 |
SFR_8BIT(P3IN); /* Port 3 Input */
|
|
|
305 |
SFR_8BIT(P3OUT); /* Port 3 Output */
|
|
|
306 |
SFR_8BIT(P3DIR); /* Port 3 Direction */
|
|
|
307 |
SFR_8BIT(P3SEL); /* Port 3 Selection */
|
|
|
308 |
|
|
|
309 |
SFR_8BIT(P4IN); /* Port 4 Input */
|
|
|
310 |
SFR_8BIT(P4OUT); /* Port 4 Output */
|
|
|
311 |
SFR_8BIT(P4DIR); /* Port 4 Direction */
|
|
|
312 |
SFR_8BIT(P4SEL); /* Port 4 Selection */
|
|
|
313 |
|
|
|
314 |
/************************************************************
|
|
|
315 |
* BASIC TIMER
|
|
|
316 |
************************************************************/
|
|
|
317 |
#define __MSP430_HAS_BT__ /* Definition to show that Module is available */
|
|
|
318 |
|
|
|
319 |
SFR_8BIT(BTCTL); /* Basic Timer Control */
|
|
|
320 |
/* The bit names have been prefixed with "BT" */
|
|
|
321 |
#define BTIP0 (0x01)
|
|
|
322 |
#define BTIP1 (0x02)
|
|
|
323 |
#define BTIP2 (0x04)
|
|
|
324 |
#define BTFRFQ0 (0x08)
|
|
|
325 |
#define BTFRFQ1 (0x10)
|
|
|
326 |
#define BTDIV (0x20) /* fCLK2 = ACLK:256 */
|
|
|
327 |
#define BTHOLD (0x40) /* BT1 is held if this bit is set */
|
|
|
328 |
#define BTSSEL (0x80) /* fBT = fMCLK (main clock) */
|
|
|
329 |
|
|
|
330 |
SFR_8BIT(BTCNT1); /* Basic Timer Count 1 */
|
|
|
331 |
SFR_8BIT(BTCNT2); /* Basic Timer Count 2 */
|
|
|
332 |
|
|
|
333 |
/* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */
|
|
|
334 |
#define BT_fCLK2_ACLK (0x00)
|
|
|
335 |
#define BT_fCLK2_ACLK_DIV256 (BTDIV)
|
|
|
336 |
#define BT_fCLK2_MCLK (BTSSEL)
|
|
|
337 |
|
|
|
338 |
/* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */
|
|
|
339 |
#define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */
|
|
|
340 |
#define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */
|
|
|
341 |
#define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */
|
|
|
342 |
#define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */
|
|
|
343 |
#define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */
|
|
|
344 |
#define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */
|
|
|
345 |
#define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */
|
|
|
346 |
#define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */
|
|
|
347 |
/* Frequency of LCD coded with Bits 3-4 */
|
|
|
348 |
#define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */
|
|
|
349 |
#define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */
|
|
|
350 |
#define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */
|
|
|
351 |
#define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */
|
|
|
352 |
/* LCD frequency values with fBT=fACLK */
|
|
|
353 |
#define BT_fLCD_1K (0x00) /* fACLK:32 (default) */
|
|
|
354 |
#define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */
|
|
|
355 |
#define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */
|
|
|
356 |
#define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */
|
|
|
357 |
/* LCD frequency values with fBT=fMCLK */
|
|
|
358 |
#define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */
|
|
|
359 |
#define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */
|
|
|
360 |
#define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */
|
|
|
361 |
/* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */
|
|
|
362 |
/* fBT=fACLK is thought for longer interval times */
|
|
|
363 |
#define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */
|
|
|
364 |
#define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */
|
|
|
365 |
#define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */
|
|
|
366 |
#define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */
|
|
|
367 |
#define BT_ADLY_1 (BTIP2) /* 1ms " */
|
|
|
368 |
#define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */
|
|
|
369 |
#define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */
|
|
|
370 |
#define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */
|
|
|
371 |
#define BT_ADLY_16 (BTDIV) /* 16ms " */
|
|
|
372 |
#define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */
|
|
|
373 |
#define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */
|
|
|
374 |
#define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */
|
|
|
375 |
#define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */
|
|
|
376 |
#define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */
|
|
|
377 |
#define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */
|
|
|
378 |
#define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */
|
|
|
379 |
/* fCLK2=fMCLK (1MHz) is thought for short interval times */
|
|
|
380 |
/* the timing for short intervals is more precise than ACLK */
|
|
|
381 |
/* NOTE */
|
|
|
382 |
/* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */
|
|
|
383 |
/* Too low interval time results in interrupts too frequent for the processor to handle! */
|
|
|
384 |
#define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */
|
|
|
385 |
#define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */
|
|
|
386 |
#define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */
|
|
|
387 |
#define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */
|
|
|
388 |
#define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */
|
|
|
389 |
#define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */
|
|
|
390 |
#define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */
|
|
|
391 |
#define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */
|
|
|
392 |
|
|
|
393 |
/* Reset/Hold coded with Bits 6-7 in BT(1)CTL */
|
|
|
394 |
/* this is for BT */
|
|
|
395 |
//#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */
|
|
|
396 |
//#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */
|
|
|
397 |
/* this is for BT1 */
|
|
|
398 |
#define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */
|
|
|
399 |
#define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */
|
|
|
400 |
|
|
|
401 |
/* INTERRUPT CONTROL BITS */
|
|
|
402 |
/* #define BTIE 0x80 */
|
|
|
403 |
/* #define BTIFG 0x80 */
|
|
|
404 |
|
|
|
405 |
/************************************************************
|
|
|
406 |
* SYSTEM CLOCK GENERATOR
|
|
|
407 |
************************************************************/
|
|
|
408 |
#define __MSP430_HAS_FLL__ /* Definition to show that Module is available */
|
|
|
409 |
|
|
|
410 |
SFR_8BIT(SCFI0); /* System Clock Frequency Integrator 0 */
|
|
|
411 |
#define FN_2 (0x04)
|
|
|
412 |
#define FN_3 (0x08)
|
|
|
413 |
#define FN_4 (0x10)
|
|
|
414 |
|
|
|
415 |
SFR_8BIT(SCFI1); /* System Clock Frequency Integrator 1 */
|
|
|
416 |
SFR_8BIT(SCFQCTL); /* System Clock Frequency Control */
|
|
|
417 |
/* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */
|
|
|
418 |
/* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */
|
|
|
419 |
/* #define SCFQ_64K 0x01 fMCLK=2*fACLK 3+1 to 127+1 is possible */
|
|
|
420 |
#define SCFQ_128K (0x03) /* fMCLK=4*fACLK */
|
|
|
421 |
#define SCFQ_256K (0x07) /* fMCLK=8*fACLK */
|
|
|
422 |
#define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */
|
|
|
423 |
#define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */
|
|
|
424 |
#define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */
|
|
|
425 |
#define SCFQ_4M (0x7F) /* fMCLK=128*fACLK not possible for ICE */
|
|
|
426 |
|
|
|
427 |
SFR_8BIT(CBCTL); /* Crystal Buffer Control *** WRITE-ONLY *** */
|
|
|
428 |
#define CBE (0x01)
|
|
|
429 |
#define CBSEL0 (0x02)
|
|
|
430 |
#define CBSEL1 (0x04)
|
|
|
431 |
/* Source select of frequency at output pin XBUF coded with Bits 1-2 in CBCTL */
|
|
|
432 |
#define CBSEL_ACLK (0x00) /* source is ACLK (default after POR) */
|
|
|
433 |
#define CBSEL_ACLK_DIV2 (CBSEL0) /* source is ACLK/2 */
|
|
|
434 |
#define CBSEL_ACLK_DIV4 (CBSEL1) /* source is ACLK/4 */
|
|
|
435 |
#define CBSEL_MCLK (CBSEL1+CBSEL0) /* source is MCLK */
|
|
|
436 |
|
|
|
437 |
/* INTERRUPT CONTROL BITS */
|
|
|
438 |
/* These two bits are defined in the Special Function Registers */
|
|
|
439 |
/* #define OFIFG 0x02 */
|
|
|
440 |
/* #define OFIE 0x02 */
|
|
|
441 |
|
|
|
442 |
/************************************************************
|
|
|
443 |
* LCD REGISTER
|
|
|
444 |
************************************************************/
|
|
|
445 |
#define __MSP430_HAS_LCD__ /* Definition to show that Module is available */
|
|
|
446 |
|
|
|
447 |
SFR_8BIT(LCDCTL); /* LCD Control */
|
|
|
448 |
/* the names of the mode bits are different from the spec */
|
|
|
449 |
#define LCDON (0x01)
|
|
|
450 |
#define LCDLOWR (0x02)
|
|
|
451 |
#define LCDSON (0x04)
|
|
|
452 |
#define LCDMX0 (0x08)
|
|
|
453 |
#define LCDMX1 (0x10)
|
|
|
454 |
#define LCDP0 (0x20)
|
|
|
455 |
#define LCDP1 (0x40)
|
|
|
456 |
#define LCDP2 (0x80)
|
|
|
457 |
/* Display modes coded with Bits 2-4 */
|
|
|
458 |
#define LCDSTATIC (LCDSON)
|
|
|
459 |
#define LCD2MUX (LCDMX0+LCDSON)
|
|
|
460 |
#define LCD3MUX (LCDMX1+LCDSON)
|
|
|
461 |
#define LCD4MUX (LCDMX1+LCDMX0+LCDSON)
|
|
|
462 |
/* Group select code with Bits 5-7 Seg.lines Dig.output */
|
|
|
463 |
#define LCDSG0 (0x00) /* S0 - S1 O2 - O29 (default) */
|
|
|
464 |
#define LCDSG0_1 (LCDP0) /* S0 - S5 O6 - O29 */
|
|
|
465 |
#define LCDSG0_2 (LCDP1) /* S0 - S9 O10 - O29 */
|
|
|
466 |
#define LCDSG0_3 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */
|
|
|
467 |
#define LCDSG0_4 (LCDP2) /* S0 - S17 O18 - O29 */
|
|
|
468 |
#define LCDSG0_5 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */
|
|
|
469 |
#define LCDSG0_6 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */
|
|
|
470 |
#define LCDSG0_7 (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- */
|
|
|
471 |
/* NOTE: YOU CAN ONLY USE THE 'S' OR 'G' DECLARATIONS FOR A COMMAND */
|
|
|
472 |
/* MOV #LCDSG0_3+LCDOG2_7,&LCDCTL ACTUALY MEANS MOV #LCDP1,&LCDCTL! */
|
|
|
473 |
#define LCDOG1_7 (0x00) /* S0 - S1 O2 - O29 (default) */
|
|
|
474 |
#define LCDOG2_7 (LCDP0) /* S0 - S5 O6 - O29 */
|
|
|
475 |
#define LCDOG3_7 (LCDP1) /* S0 - S9 O10 - O29 */
|
|
|
476 |
#define LCDOG4_7 (LCDP1+LCDP0) /* S0 - S13 O14 - O29 */
|
|
|
477 |
#define LCDOG5_7 (LCDP2) /* S0 - S17 O18 - O29 */
|
|
|
478 |
#define LCDOG6_7 (LCDP2+LCDP0) /* S0 - S21 O22 - O29 */
|
|
|
479 |
#define LCDOG7 (LCDP2+LCDP1) /* S0 - S25 O26 - O29 */
|
|
|
480 |
#define LCDOGOFF (LCDP2+LCDP1+LCDP0) /* S0 - S29 --------- */
|
|
|
481 |
|
|
|
482 |
#define LCDMEM_ (0x0031) /* LCD Memory */
|
|
|
483 |
#ifdef __ASM_HEADER__
|
|
|
484 |
#define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */
|
|
|
485 |
#else
|
|
|
486 |
#define LCDMEM ((char*) LCDMEM_) /* LCD Memory (for C) */
|
|
|
487 |
#endif
|
|
|
488 |
SFR_8BIT(LCDM1); /* LCD Memory 1 */
|
|
|
489 |
SFR_8BIT(LCDM2); /* LCD Memory 2 */
|
|
|
490 |
SFR_8BIT(LCDM3); /* LCD Memory 3 */
|
|
|
491 |
SFR_8BIT(LCDM4); /* LCD Memory 4 */
|
|
|
492 |
SFR_8BIT(LCDM5); /* LCD Memory 5 */
|
|
|
493 |
SFR_8BIT(LCDM6); /* LCD Memory 6 */
|
|
|
494 |
SFR_8BIT(LCDM7); /* LCD Memory 7 */
|
|
|
495 |
SFR_8BIT(LCDM8); /* LCD Memory 8 */
|
|
|
496 |
SFR_8BIT(LCDM9); /* LCD Memory 9 */
|
|
|
497 |
SFR_8BIT(LCDM10); /* LCD Memory 10 */
|
|
|
498 |
SFR_8BIT(LCDM11); /* LCD Memory 11 */
|
|
|
499 |
SFR_8BIT(LCDM12); /* LCD Memory 12 */
|
|
|
500 |
SFR_8BIT(LCDM13); /* LCD Memory 13 */
|
|
|
501 |
SFR_8BIT(LCDM14); /* LCD Memory 14 */
|
|
|
502 |
SFR_8BIT(LCDM15); /* LCD Memory 15 */
|
|
|
503 |
|
|
|
504 |
#define LCDMA (LCDM10) /* LCD Memory A */
|
|
|
505 |
#define LCDMB (LCDM11) /* LCD Memory B */
|
|
|
506 |
#define LCDMC (LCDM12) /* LCD Memory C */
|
|
|
507 |
#define LCDMD (LCDM13) /* LCD Memory D */
|
|
|
508 |
#define LCDME (LCDM14) /* LCD Memory E */
|
|
|
509 |
#define LCDMF (LCDM15) /* LCD Memory F */
|
|
|
510 |
|
|
|
511 |
/************************************************************
|
|
|
512 |
* USART
|
|
|
513 |
************************************************************/
|
|
|
514 |
#define __MSP430_HAS_UART0__ /* Definition to show that Module is available */
|
|
|
515 |
|
|
|
516 |
SFR_8BIT(UCTL); /* USART Control */
|
|
|
517 |
SFR_8BIT(UTCTL); /* USART Transmit Control */
|
|
|
518 |
SFR_8BIT(URCTL); /* USART Receive Control */
|
|
|
519 |
SFR_8BIT(UMCTL); /* USART Modulation Control */
|
|
|
520 |
SFR_8BIT(UBR0); /* USART Baud Rate 0 */
|
|
|
521 |
SFR_8BIT(UBR1); /* USART Buad Rate 1 */
|
|
|
522 |
SFR_8BIT(RXBUF); /* USART Receive Buffer */
|
|
|
523 |
SFR_8BIT(TXBUF); /* USART Transmit Buffer */
|
|
|
524 |
|
|
|
525 |
#define PENA (0x80) /* UCTL */
|
|
|
526 |
#define PEV (0x40)
|
|
|
527 |
#define SPB (0x20) /* to distinguish from stackpointer SP */
|
|
|
528 |
#define CHAR (0x10)
|
|
|
529 |
#define LISTEN (0x08)
|
|
|
530 |
#define SYNC (0x04)
|
|
|
531 |
#define MM (0x02)
|
|
|
532 |
#define SWRST (0x01)
|
|
|
533 |
|
|
|
534 |
#define CKPH (0x80) /* UTCTL */
|
|
|
535 |
#define CKPL (0x40)
|
|
|
536 |
#define SSEL1 (0x20)
|
|
|
537 |
#define SSEL0 (0x10)
|
|
|
538 |
#define URXSE (0x08)
|
|
|
539 |
#define TXWAKE (0x04)
|
|
|
540 |
#define STC (0x02)
|
|
|
541 |
#define TXEPT (0x01)
|
|
|
542 |
|
|
|
543 |
#define FE (0x80) /* URCTL */
|
|
|
544 |
#define PE (0x40)
|
|
|
545 |
#define OE (0x20)
|
|
|
546 |
#define BRK (0x10)
|
|
|
547 |
#define URXEIE (0x08)
|
|
|
548 |
#define URXWIE (0x04)
|
|
|
549 |
#define RXWAKE (0x02)
|
|
|
550 |
#define RXERR (0x01)
|
|
|
551 |
|
|
|
552 |
/************************************************************
|
|
|
553 |
* Timer A5
|
|
|
554 |
************************************************************/
|
|
|
555 |
#define __MSP430_HAS_TA5__ /* Definition to show that Module is available */
|
|
|
556 |
|
|
|
557 |
SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */
|
|
|
558 |
SFR_16BIT(TACTL); /* Timer A Control */
|
|
|
559 |
SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */
|
|
|
560 |
SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */
|
|
|
561 |
SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */
|
|
|
562 |
SFR_16BIT(TACCTL3); /* Timer A Capture/Compare Control 3 */
|
|
|
563 |
SFR_16BIT(TACCTL4); /* Timer A Capture/Compare Control 4 */
|
|
|
564 |
SFR_16BIT(TAR); /* Timer A Counter Register */
|
|
|
565 |
SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */
|
|
|
566 |
SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */
|
|
|
567 |
SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 */
|
|
|
568 |
SFR_16BIT(TACCR3); /* Timer A Capture/Compare 3 */
|
|
|
569 |
SFR_16BIT(TACCR4); /* Timer A Capture/Compare 4 */
|
|
|
570 |
|
|
|
571 |
/* Alternate register names */
|
|
|
572 |
#define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
|
|
|
573 |
#define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
|
|
|
574 |
#define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
|
|
|
575 |
#define CCTL3 TACCTL3 /* Timer A Capture/Compare Control 3 */
|
|
|
576 |
#define CCTL4 TACCTL4 /* Timer A Capture/Compare Control 4 */
|
|
|
577 |
#define CCR0 TACCR0 /* Timer A Capture/Compare 0 */
|
|
|
578 |
#define CCR1 TACCR1 /* Timer A Capture/Compare 1 */
|
|
|
579 |
#define CCR2 TACCR2 /* Timer A Capture/Compare 2 */
|
|
|
580 |
#define CCR3 TACCR3 /* Timer A Capture/Compare 3 */
|
|
|
581 |
#define CCR4 TACCR4 /* Timer A Capture/Compare 4 */
|
|
|
582 |
#define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
|
|
|
583 |
#define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
|
|
|
584 |
#define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
|
|
|
585 |
#define CCTL3_ TACCTL3_ /* Timer A Capture/Compare Control 3 */
|
|
|
586 |
#define CCTL4_ TACCTL4_ /* Timer A Capture/Compare Control 4 */
|
|
|
587 |
#define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
|
|
|
588 |
#define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
|
|
|
589 |
#define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
|
|
|
590 |
#define CCR3_ TACCR3_ /* Timer A Capture/Compare 3 */
|
|
|
591 |
#define CCR4_ TACCR4_ /* Timer A Capture/Compare 4 */
|
|
|
592 |
/* Alternate register names - 5xx style */
|
|
|
593 |
#define TA0IV TAIV /* Timer A Interrupt Vector Word */
|
|
|
594 |
#define TA0CTL TACTL /* Timer A Control */
|
|
|
595 |
#define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */
|
|
|
596 |
#define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */
|
|
|
597 |
#define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */
|
|
|
598 |
#define TA0CCTL3 TACCTL3 /* Timer A Capture/Compare Control 3 */
|
|
|
599 |
#define TA0CCTL4 TACCTL4 /* Timer A Capture/Compare Control 4 */
|
|
|
600 |
#define TA0R TAR /* Timer A Counter Register */
|
|
|
601 |
#define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */
|
|
|
602 |
#define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */
|
|
|
603 |
#define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */
|
|
|
604 |
#define TA0CCR3 TACCR3 /* Timer A Capture/Compare 3 */
|
|
|
605 |
#define TA0CCR4 TACCR4 /* Timer A Capture/Compare 4 */
|
|
|
606 |
#define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */
|
|
|
607 |
#define TA0CTL_ TACTL_ /* Timer A Control */
|
|
|
608 |
#define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */
|
|
|
609 |
#define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */
|
|
|
610 |
#define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */
|
|
|
611 |
#define TA0CCTL3_ TACCTL3_ /* Timer A Capture/Compare Control 3 */
|
|
|
612 |
#define TA0CCTL4_ TACCTL4_ /* Timer A Capture/Compare Control 4 */
|
|
|
613 |
#define TA0R_ TAR_ /* Timer A Counter Register */
|
|
|
614 |
#define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */
|
|
|
615 |
#define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */
|
|
|
616 |
#define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */
|
|
|
617 |
#define TA0CCR3_ TACCR3_ /* Timer A Capture/Compare 3 */
|
|
|
618 |
#define TA0CCR4_ TACCR4_ /* Timer A Capture/Compare 4 */
|
|
|
619 |
|
|
|
620 |
#define TASSEL1 (0x0200) /* Timer A clock source select 0 */
|
|
|
621 |
#define TASSEL0 (0x0100) /* Timer A clock source select 1 */
|
|
|
622 |
#define ID1 (0x0080) /* Timer A clock input divider 1 */
|
|
|
623 |
#define ID0 (0x0040) /* Timer A clock input divider 0 */
|
|
|
624 |
#define MC1 (0x0020) /* Timer A mode control 1 */
|
|
|
625 |
#define MC0 (0x0010) /* Timer A mode control 0 */
|
|
|
626 |
#define TACLR (0x0004) /* Timer A counter clear */
|
|
|
627 |
#define TAIE (0x0002) /* Timer A counter interrupt enable */
|
|
|
628 |
#define TAIFG (0x0001) /* Timer A counter interrupt flag */
|
|
|
629 |
|
|
|
630 |
#define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */
|
|
|
631 |
#define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */
|
|
|
632 |
#define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */
|
|
|
633 |
#define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */
|
|
|
634 |
#define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */
|
|
|
635 |
#define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */
|
|
|
636 |
#define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */
|
|
|
637 |
#define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */
|
|
|
638 |
#define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */
|
|
|
639 |
#define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */
|
|
|
640 |
#define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */
|
|
|
641 |
#define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */
|
|
|
642 |
|
|
|
643 |
#define CM1 (0x8000) /* Capture mode 1 */
|
|
|
644 |
#define CM0 (0x4000) /* Capture mode 0 */
|
|
|
645 |
#define CCIS1 (0x2000) /* Capture input select 1 */
|
|
|
646 |
#define CCIS0 (0x1000) /* Capture input select 0 */
|
|
|
647 |
#define SCS (0x0800) /* Capture sychronize */
|
|
|
648 |
#define SCCI (0x0400) /* Latched capture signal (read) */
|
|
|
649 |
#define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */
|
|
|
650 |
#define OUTMOD2 (0x0080) /* Output mode 2 */
|
|
|
651 |
#define OUTMOD1 (0x0040) /* Output mode 1 */
|
|
|
652 |
#define OUTMOD0 (0x0020) /* Output mode 0 */
|
|
|
653 |
#define CCIE (0x0010) /* Capture/compare interrupt enable */
|
|
|
654 |
#define CCI (0x0008) /* Capture input signal (read) */
|
|
|
655 |
#define OUT (0x0004) /* PWM Output signal if output mode 0 */
|
|
|
656 |
#define COV (0x0002) /* Capture/compare overflow flag */
|
|
|
657 |
#define CCIFG (0x0001) /* Capture/compare interrupt flag */
|
|
|
658 |
|
|
|
659 |
#define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */
|
|
|
660 |
#define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */
|
|
|
661 |
#define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */
|
|
|
662 |
#define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */
|
|
|
663 |
#define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */
|
|
|
664 |
#define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */
|
|
|
665 |
#define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */
|
|
|
666 |
#define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */
|
|
|
667 |
#define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */
|
|
|
668 |
#define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */
|
|
|
669 |
#define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */
|
|
|
670 |
#define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */
|
|
|
671 |
#define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */
|
|
|
672 |
#define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */
|
|
|
673 |
#define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */
|
|
|
674 |
#define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */
|
|
|
675 |
|
|
|
676 |
/* TA5IV Definitions */
|
|
|
677 |
#define TAIV_NONE (0x0000) /* No Interrupt pending */
|
|
|
678 |
#define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */
|
|
|
679 |
#define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */
|
|
|
680 |
#define TAIV_TACCR3 (0x0006) /* TACCR3_CCIFG */
|
|
|
681 |
#define TAIV_TACCR4 (0x0008) /* TACCR4_CCIFG */
|
|
|
682 |
#define TAIV_TAIFG (0x000A) /* TAIFG */
|
|
|
683 |
|
|
|
684 |
/************************************************************
|
|
|
685 |
* 8BIT TIMER/COUNTER
|
|
|
686 |
************************************************************/
|
|
|
687 |
#define __MSP430_HAS_8BTC__ /* Definition to show that Module is available */
|
|
|
688 |
|
|
|
689 |
SFR_8BIT(TCCTL); /* Timer/Counter Control */
|
|
|
690 |
/* The bit names have been prefixed with "TC" */
|
|
|
691 |
#define TCRXD (0x01)
|
|
|
692 |
#define TCTXD (0x02)
|
|
|
693 |
#define TCRXACT (0x04)
|
|
|
694 |
#define TCENCNT (0x08)
|
|
|
695 |
#define TCTXE (0x10)
|
|
|
696 |
#define TCISCTL (0x20)
|
|
|
697 |
#define TCSSEL0 (0x40)
|
|
|
698 |
#define TCSSEL1 (0x80)
|
|
|
699 |
/* Source select of clock input coded with Bits 6-7 */
|
|
|
700 |
#define TCSSEL_P01 (0x00) /* source is signal at pin P0.1 (default) */
|
|
|
701 |
#define TCSSEL_ACLK (TCSSEL0) /* source is ACLK */
|
|
|
702 |
#define TCSSEL_MCLK (TCSSEL1) /* source is MCLK */
|
|
|
703 |
#define TCSSEL_P01_MCLK (TCSSEL1+TCSSEL0) /* source is signal pin P0.1 .AND. MCLK */
|
|
|
704 |
|
|
|
705 |
SFR_8BIT(TCPLD); /* Timer/Counter Preload */
|
|
|
706 |
SFR_8BIT(TCDAT); /* Timer/Counter Data */
|
|
|
707 |
|
|
|
708 |
/************************************************************
|
|
|
709 |
* TIMER/PORT
|
|
|
710 |
************************************************************/
|
|
|
711 |
#define __MSP430_HAS_TP__ /* Definition to show that Module is available */
|
|
|
712 |
|
|
|
713 |
SFR_8BIT(TPCTL); /* Timer/Port Control */
|
|
|
714 |
#define EN1FG (0x01)
|
|
|
715 |
#define RC1FG (0x02)
|
|
|
716 |
#define RC2FG (0x04)
|
|
|
717 |
#define EN1 (0x08)
|
|
|
718 |
#define ENA (0x10)
|
|
|
719 |
#define ENB (0x20)
|
|
|
720 |
#define TPSSEL0 (0x40)
|
|
|
721 |
#define TPSSEL1 (0x80)
|
|
|
722 |
/* The EN1 signal of TPCNT1 is coded with with Bits 3-5 in TPCTL */
|
|
|
723 |
#define TPCNT1_EN_OFF (0x00) /* TPCNT1 is disabled */
|
|
|
724 |
#define TPCNT1_EN_ON (ENA) /* " is enabled */
|
|
|
725 |
#define TPCNT1_EN_nTPIN5 (ENB) /* " is enabled with ~TPIN.5 */
|
|
|
726 |
#define TPCNT1_EN_TPIN5 (TPSSEL0+ENB) /* " is enabled with TPIN.5 */
|
|
|
727 |
#define TPCNT1_EN_nCIN (ENB+ENA) /* " is enabled with ~CIN */
|
|
|
728 |
#define TPCNT1_EN_CIN (TPSSEL0+ENB+ENA) /* " is enabled with CIN */
|
|
|
729 |
|
|
|
730 |
/* Source select of clock input coded with Bits 6-7 in TPCTL */
|
|
|
731 |
#define TPSSEL_CLK1_CIN (0x00) /* CLK1 source is signal at CIN (default) */
|
|
|
732 |
#define TPSSEL_CLK1_ACLK (TPSSEL0) /* CLK1 source is ACLK */
|
|
|
733 |
#define TPSSEL_CLK1_MCLK (TPSSEL1) /* CLK1 source is MCLK */
|
|
|
734 |
|
|
|
735 |
/* DATA REGISTER ADDRESSES */
|
|
|
736 |
SFR_8BIT(TPCNT1); /* Timer/Port Counter 1 */
|
|
|
737 |
SFR_8BIT(TPCNT2); /* Timer/Port Counter 2 */
|
|
|
738 |
|
|
|
739 |
SFR_8BIT(TPD); /* Timer/Port Data */
|
|
|
740 |
#define TPD_0 (0x01)
|
|
|
741 |
#define TPD_1 (0x02)
|
|
|
742 |
#define TPD_2 (0x04)
|
|
|
743 |
#define TPD_3 (0x08)
|
|
|
744 |
#define TPD_4 (0x10)
|
|
|
745 |
#define TPD_5 (0x20)
|
|
|
746 |
#define CPON (0x40)
|
|
|
747 |
#define B16 (0x80)
|
|
|
748 |
|
|
|
749 |
SFR_8BIT(TPE); /* Timer/Port Enable */
|
|
|
750 |
#define TPE_0 (0x01)
|
|
|
751 |
#define TPE_1 (0x02)
|
|
|
752 |
#define TPE_2 (0x04)
|
|
|
753 |
#define TPE_3 (0x08)
|
|
|
754 |
#define TPE_4 (0x10)
|
|
|
755 |
#define TPE_5 (0x20)
|
|
|
756 |
#define TPSSEL2 (0x40)
|
|
|
757 |
#define TPSSEL3 (0x80)
|
|
|
758 |
/* Source select of clock input coded with Bits 6-7 in TPE
|
|
|
759 |
NOTE: If the control bit B16 in TPD is set, TPSSEL2/3
|
|
|
760 |
are 'don't care' and the clock source of counter
|
|
|
761 |
TPCNT2 is the same as of the counter TPCNT1. */
|
|
|
762 |
#define TPSSEL_CLK2_TPIN5 (0x00) /* CLK2 source is signal TPIN.5 (default) */
|
|
|
763 |
#define TPSSEL_CLK2_ACLK (TPSSEL2) /* CLK2 source is ACLK */
|
|
|
764 |
#define TPSSEL_CLK2_MCLK (TPSSEL3) /* CLK2 source is MCLK */
|
|
|
765 |
#define TPSSEL_CLK2_OFF (TPSSEL3+TPSSEL2)/* CLK2 source is disabled */
|
|
|
766 |
|
|
|
767 |
/************************************************************
|
|
|
768 |
* EPROM CONTROL
|
|
|
769 |
************************************************************/
|
|
|
770 |
#define __MSP430_HAS_EPROM__ /* Definition to show that Module is available */
|
|
|
771 |
|
|
|
772 |
SFR_8BIT(EPCTL); /* EPROM Control */
|
|
|
773 |
#define EPEXE (0x01)
|
|
|
774 |
#define EPVPPS (0x02)
|
|
|
775 |
|
|
|
776 |
/************************************************************
|
|
|
777 |
* Interrupt Vectors (offset from 0xFFE0)
|
|
|
778 |
************************************************************/
|
|
|
779 |
|
|
|
780 |
#define VECTOR_NAME(name) name##_ptr
|
|
|
781 |
#define EMIT_PRAGMA(x) _Pragma(#x)
|
|
|
782 |
#define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name
|
|
|
783 |
#define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section))
|
|
|
784 |
#define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \
|
|
|
785 |
PLACE_VECTOR(VECTOR_NAME(func), offset)
|
|
|
786 |
|
|
|
787 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
788 |
#define PORT0_VECTOR ".int00" /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */
|
|
|
789 |
#else
|
|
|
790 |
#define PORT0_VECTOR (0 * 1u) /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */
|
|
|
791 |
/*#define PORT0_ISR(func) ISR_VECTOR(func, ".int00") */ /* 0xFFE0 Port 0 Bits 2-7 [Lowest Priority] */ /* CCE V2 Style */
|
|
|
792 |
#endif
|
|
|
793 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
794 |
#define BASICTIMER_VECTOR ".int01" /* 0xFFE2 Basic Timer */
|
|
|
795 |
#else
|
|
|
796 |
#define BASICTIMER_VECTOR (1 * 1u) /* 0xFFE2 Basic Timer */
|
|
|
797 |
/*#define BASICTIMER_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Basic Timer */ /* CCE V2 Style */
|
|
|
798 |
#endif
|
|
|
799 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
800 |
#define PORT1_VECTOR ".int02" /* 0xFFE4 Port 1 */
|
|
|
801 |
#else
|
|
|
802 |
#define PORT1_VECTOR (2 * 1u) /* 0xFFE4 Port 1 */
|
|
|
803 |
/*#define PORT1_ISR(func) ISR_VECTOR(func, ".int02") */ /* 0xFFE4 Port 1 */ /* CCE V2 Style */
|
|
|
804 |
#endif
|
|
|
805 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
806 |
#define PORT2_VECTOR ".int03" /* 0xFFE6 Port 2 */
|
|
|
807 |
#else
|
|
|
808 |
#define PORT2_VECTOR (3 * 1u) /* 0xFFE6 Port 2 */
|
|
|
809 |
/*#define PORT2_ISR(func) ISR_VECTOR(func, ".int03") */ /* 0xFFE6 Port 2 */ /* CCE V2 Style */
|
|
|
810 |
#endif
|
|
|
811 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
812 |
#define TIMERPORT_VECTOR ".int04" /* 0xFFE8 Timer/Port */
|
|
|
813 |
#else
|
|
|
814 |
#define TIMERPORT_VECTOR (4 * 1u) /* 0xFFE8 Timer/Port */
|
|
|
815 |
/*#define TIMERPORT_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Timer/Port */ /* CCE V2 Style */
|
|
|
816 |
#endif
|
|
|
817 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
818 |
#define USARTTX_VECTOR ".int06" /* 0xFFEC USART Transmit */
|
|
|
819 |
#else
|
|
|
820 |
#define USARTTX_VECTOR (6 * 1u) /* 0xFFEC USART Transmit */
|
|
|
821 |
/*#define USARTTX_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC USART Transmit */ /* CCE V2 Style */
|
|
|
822 |
#endif
|
|
|
823 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
824 |
#define USARTRX_VECTOR ".int07" /* 0xFFEE USART Receive */
|
|
|
825 |
#else
|
|
|
826 |
#define USARTRX_VECTOR (7 * 1u) /* 0xFFEE USART Receive */
|
|
|
827 |
/*#define USARTRX_ISR(func) ISR_VECTOR(func, ".int07") */ /* 0xFFEE USART Receive */ /* CCE V2 Style */
|
|
|
828 |
#endif
|
|
|
829 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
830 |
#define TIMERA1_VECTOR ".int08" /* 0xFFF0 Timer A CC1-4, TA */
|
|
|
831 |
#else
|
|
|
832 |
#define TIMERA1_VECTOR (8 * 1u) /* 0xFFF0 Timer A CC1-4, TA */
|
|
|
833 |
/*#define TIMERA1_ISR(func) ISR_VECTOR(func, ".int08") */ /* 0xFFF0 Timer A CC1-4, TA */ /* CCE V2 Style */
|
|
|
834 |
#endif
|
|
|
835 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
836 |
#define TIMERA0_VECTOR ".int09" /* 0xFFF2 Timer A CC0 */
|
|
|
837 |
#else
|
|
|
838 |
#define TIMERA0_VECTOR (9 * 1u) /* 0xFFF2 Timer A CC0 */
|
|
|
839 |
/*#define TIMERA0_ISR(func) ISR_VECTOR(func, ".int09") */ /* 0xFFF2 Timer A CC0 */ /* CCE V2 Style */
|
|
|
840 |
#endif
|
|
|
841 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
842 |
#define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */
|
|
|
843 |
#else
|
|
|
844 |
#define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */
|
|
|
845 |
/*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */
|
|
|
846 |
#endif
|
|
|
847 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
848 |
#define IO1_VECTOR ".int12" /* 0xFFF8 Dedicated IO (P0.1) */
|
|
|
849 |
#else
|
|
|
850 |
#define IO1_VECTOR (12 * 1u) /* 0xFFF8 Dedicated IO (P0.1) */
|
|
|
851 |
/*#define IO1_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Dedicated IO (P0.1) */ /* CCE V2 Style */
|
|
|
852 |
#endif
|
|
|
853 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
854 |
#define IO0_VECTOR ".int13" /* 0xFFFA Dedicated IO (P0.0) */
|
|
|
855 |
#else
|
|
|
856 |
#define IO0_VECTOR (13 * 1u) /* 0xFFFA Dedicated IO (P0.0) */
|
|
|
857 |
/*#define IO0_ISR(func) ISR_VECTOR(func, ".int13") */ /* 0xFFFA Dedicated IO (P0.0) */ /* CCE V2 Style */
|
|
|
858 |
#endif
|
|
|
859 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
860 |
#define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */
|
|
|
861 |
#else
|
|
|
862 |
#define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */
|
|
|
863 |
/*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */
|
|
|
864 |
#endif
|
|
|
865 |
#ifdef __ASM_HEADER__ /* Begin #defines for assembler */
|
|
|
866 |
#define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */
|
|
|
867 |
#else
|
|
|
868 |
#define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */
|
|
|
869 |
/*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */
|
|
|
870 |
#endif
|
|
|
871 |
|
|
|
872 |
|
|
|
873 |
/************************************************************
|
|
|
874 |
* End of Modules
|
|
|
875 |
************************************************************/
|
|
|
876 |
|
|
|
877 |
#ifdef __cplusplus
|
|
|
878 |
}
|
|
|
879 |
#endif /* extern "C" */
|
|
|
880 |
|
|
|
881 |
#endif /* #ifndef __msp430x33x */
|
|
|
882 |
|