Subversion Repositories DevTools

<%

'=====================================================

'               COMMON MAKE RELEASE BUTTON SUBs

'=====================================================

'

' Conventions within this code

'

'   1) Where a paramter list contains both RTAG_ID and PV_ID, the RTAG_ID will precede the PV_ID parameter

'   2) Functions/Subs that are not used externally, are name decorated PRIVATE_

'   3) Functions/Subs that are used extennally, are name decorated PUBLIC_

'

'

'

%>

<!--#include file="release_changed.asp"-->

<%

Dim AutoBuildPermissionDenied

Dim ManualBuildPermissionDenied

Dim RaiseWIPExists

AutoBuildPermissionDenied   = FALSE

ManualBuildPermissionDenied = FALSE

'-----------------------------------------------------------------------------------------------------------------------------

' This is the pattern for approval determination. If the release is in open mode, permission is given. If the release is

' in restrictive/ccb mode, permission is given dependent on the accessControlObjectName being granted for the user.

'

Function PRIVATE_Is_Allowed_To(NNrtag_id, accessControlObjectName)

   Dim ReleaseMode

   ReleaseMode = GetReleaseMode ( NNrtag_id )

   PRIVATE_Is_Allowed_To = FALSE

   If ReleaseMode <> enumDB_RELEASE_IN_CLOSED_MODE AND ReleaseMode <> enumDB_RELEASE_IN_ARCHIVE_MODE Then

      If ( ReleaseMode = enumDB_RELEASE_IN_OPEN_MODE ) Then

         PRIVATE_Is_Allowed_To = TRUE

      Else

         If canActionControlInProject(accessControlObjectName) Then

            PRIVATE_Is_Allowed_To = TRUE

         End If

      End If

   End If

End Function

'-----------------------------------------------------------------------------------------------------------------------------

Function PRIVATE_Is_Allowed_To_Approve_Merge(NNrtag_id)

   PRIVATE_Is_Allowed_To_Approve_Merge = PRIVATE_Is_Allowed_To(NNrtag_id, "ApproveForAutoBuild") _

                                      OR PRIVATE_Is_Allowed_To(NNrtag_id, "ApproveForManualBuild")

End Function

'----------------------------------------------------------------------------------------------------------------------------------------

Function PRIVATE_Is_Allowed_To_Approve_ManualBuild(NNrtag_id)

   PRIVATE_Is_Allowed_To_Approve_ManualBuild = PRIVATE_Is_Allowed_To(NNrtag_id, "ApproveForManualBuild")

End Function

'----------------------------------------------------------------------------------------------------------------------------------------

Function PRIVATE_Is_Allowed_To_Approve_AutoBuild(NNrtag_id)

   PRIVATE_Is_Allowed_To_Approve_AutoBuild = PRIVATE_Is_Allowed_To(NNrtag_id, "ApproveForAutoBuild")

End Function

'=============================================================================================================================

' APPROVING PENDING MERGE OPERATIONS - Used from _approve_merge.asp as well as from within this file itself

'

' All functions in this section originally came from _approve_merge.asp and were placed here to support their use in more

' than the original singular context. Being relocated here allows them to be used in the additional "Bulk Release" context.

'=============================================================================================================================

'-----------------------------------------------------------------------------------------------------------------------------

' USED to approve a pending merge operation. Used internally by the bulk release operation

Sub PRIVATE_ApproveMerge ( NNrtag_id, NNpv_id, op)

   On Error Resume Next

   objEH.ErrorRedirect = TRUE

   OraDatabase.Parameters.Add "PV_ID",   NNpv_id,    ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "RTAG_ID", NNrtag_id,  ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "USER_ID", objAccessControl.UserId,   ORAPARM_INPUT, ORATYPE_NUMBER

   objEH.TryORA ( OraSession )

   OraDatabase.ExecuteSQL _

      "BEGIN "&_

      " PK_ENVIRONMENT.APPROVE_MERGE ( :PV_ID, :RTAG_ID, :USER_ID );"&_

      "END; "

   objEH.CatchORA ( OraSession )

   OraDatabase.Parameters.Remove "PV_ID"

   OraDatabase.Parameters.Remove "RTAG_ID"

   OraDatabase.Parameters.Remove "USER_ID"

   If Not objEH.LastOraFailed Then

      Dim objRC: Set objRC = New ReleaseChanged

      Dim mode

      If op = "A" Then

        mode = enumRELEASE_CHANGE_MODE_PKG_ADDED

      ElseIf op = "S" Then

        mode = enumRELEASE_CHANGE_MODE_PKG_REMOVED

      End If

      Call objRC.Run_ReleaseChanged(NNrtag_id,NNpv_id,mode,true)

      Set objRC = Nothing

   End If

End Sub

'-----------------------------------------------------------------------------------------------------------------------------

' USED to approve a pending merge operation. Used externally from the _approve_merge.asp file, loaded when the btnApproveMerge

' action button is pressed.

Sub PUBLIC_ApproveMerge ( NNrtag_id, NNpv_id )

   Dim op: op = ""

   If PRIVATE_Is_A_Valid_Pending_Merge(NNrtag_id, NNpv_id, "A") Then

     op = "A"

   ElseIf PRIVATE_Is_A_Valid_Pending_Merge(NNrtag_id, NNpv_id, "S") Then

     op = "S"

   End If 

   ' validate before carrying out the merge

   If op <> "" Then

      If PRIVATE_Is_Allowed_To_Approve_Merge(NNrtag_id) Then

         Call PRIVATE_ApproveMerge(parRtag_id, NNpv_id, op)

      End If

   End If

End Sub

'-----------------------------------------------------------------------------------------------------------------------------

' USED to validate an attempt to approve a pending merge operation

Function PRIVATE_Is_A_Valid_Pending_Merge(NNrtag_id, NNpv_id, op)

   Dim rsQry

   OraDatabase.Parameters.Add "PV_ID",   NNpv_id,   ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "RTAG_ID", NNrtag_id, ORAPARM_INPUT, ORATYPE_NUMBER

   Set rsQry = OraDatabase.DbCreateDynaset( GetQuery("PlannedPackageVersionDetails.sql"), cint(0))

   If ((NOT rsQry.BOF) AND (NOT rsQry.EOF)) Then

      ' Does the actual operation field in the database match that specified as a parameter?

      If (rsQry.Fields("operation") = op) Then

         PRIVATE_Is_A_Valid_Pending_Merge = TRUE

		Else

         PRIVATE_Is_A_Valid_Pending_Merge = FALSE

		End If

   Else

      PRIVATE_Is_A_Valid_Pending_Merge = FALSE

   End If

   OraDatabase.Parameters.Remove "PV_ID"

   OraDatabase.Parameters.Remove "RTAG_ID"

   rsQry.Close()

   Set rsQry = Nothing

End Function

'=============================================================================================================================

' APPROVING MANUAL BUILD PENDING VERSIONS - Used from _make_released.asp as well as from within this file itself

'

' All functions in this section originally came from _make_released.asp and were placed here to support their use in more

' than the original singular context. Being relocated here allows them to be used in the additional "Bulk Release" context.

'=============================================================================================================================

'----------------------------------------------------------------------------------------------------------------------------------------

' This function came from _make_released.asp and is very similar to the PRIVATE_NotifyInterestAutoBuild, except the subject/body

' text is different. Unlike its auto-build counterpart, this one is called during the process of making a manual build release

' official.

' One question arises... can we not harmonize the email notification code somewhat, between manual and autobuild releases?

'

' Currently, the function is called internally as part of the bulk release operation,

' loaded by _make_released.asp which in turn is loaded when a user presses the btnMakeReleased action button for manual

' built pending versions.

Sub PUBLIC_NotifyInterestManualBuild( NNrtag_id, NNpv_id )

   Err.Clear

   On Error Resume Next

   Dim Query_String, rsQry

   Query_String = _

   "   SELECT * FROM PACKAGE_INTEREST PI, PACKAGES PKG, PACKAGE_VERSIONS PV, USERS U,"&_

   "   RELEASE_TAGS RT, PROJECTS PRJ WHERE PKG.PKG_ID = PI.PKG_ID AND "&_

   "   RT.RTAG_ID = "& NNrtag_id &""&_

   "   AND PV.PV_ID = "& NNpv_id &" AND PV.PKG_ID = PKG.PKG_ID AND "&_

   "   PRJ.PROJ_ID = RT.PROJ_ID AND PRJ.PROJ_ID = PI.PROJ_ID AND U.USER_ID = PI.USER_ID"

   Set rsQry = OraDatabase.DbCreateDynaset( Query_String , cint(0) )

   If rsQry.RecordCount <> "" Then

      While ((NOT rsQry.BOF) AND (NOT rsQry.EOF))

         If rsQry("user_email") <> "" Then

            Send_Email  "Release Manager Notification",_

                        adminEmail, _

                        rsQry("user_email"),_

                        "Version "& rsQry("pkg_version") &" of Package "& rsQry("pkg_name") &" in Project " & rsQry("proj_name") &" on Release Branch " & rsQry("rtag_name") &" has been released.",_

                        "You have received this email as a result of your interest in this package. If you do not wish to receive further emails then remove your package interest from the notifications area in Release Manager.",_

                        NULL

         End If

         rsQry.MoveNext

      Wend

   End If

   rsQry.Close()

   set rsQry = nothing

End Sub

'----------------------------------------------------------------------------------------------------------------------------------------

' Currently, this function is called internally as part of the bulk release operation,

' loaded by _make_released.asp which in turn is loaded when a user presses the btnMakeReleased action button for manual

' built pending versions. It initiates the execution of the windows script file that performs additional database updates

' that are needed to make official a package version that has already been built and published into dpkg_archive. This includes

' collecting info on all files that were published to dpkg_archive, and inserting that info into the RELEASED_COMPONENTS table.

Function PUBLIC_Run_onMakeOfficial ( nRtag_id, nPv_id )

   Dim objWSH, proj_id, Qry, sRtagName

   PUBLIC_Run_onMakeOfficial = FALSE

   On Error Resume Next

   objEH.TryORA ( OraSession )

   OraDatabase.ExecuteSQL " UPDATE package_versions "&_

                          " SET release_notes_info = '"& enum_RELEASE_NOTES_GENERATING &"'"&_

                          " WHERE pv_id = "& nPv_id

   objEH.CatchORA ( OraSession )

   If objEH.LastOraFailed = FALSE Then

'     Set objWSH = Server.CreateObject("WScript.Shell")

'     'Used for getting the package name and package version

'     OraDatabase.Parameters.Add "RTAG_ID", nRtag_id, ORAPARM_INPUT, ORATYPE_NUMBER

'

'     Set Qry = OraDatabase.DbCreateDynaset( "SELECT * FROM RELEASE_TAGS WHERE RTAG_ID = :RTAG_ID", 0 )

'

'     proj_id = Qry("proj_id")

'     sRtagName = UCase( Qry("rtag_name") )

'

'     Qry.Close()

'     Set Qry = Nothing

'

'     OraDatabase.Parameters.Remove "RTAG_ID"

'

'     ' Wait for the script to complete

'     '     - Improves reliability of RN Generation

'        objWSH.Run   "cmd.exe /c cscript.exe //B //NoLogo "& rootPath & SCRIPTS_FOLDER &"\on_Make_Official.wsf //job:GetComponents //job:GenerateReleaseNotes //job:PostRun "&_

'                    "/pv_id:"& nPv_id & " /proj_id:"& proj_id &" /rtag_name:"""&sRtagName&"", _

'                    0, True

'

'     Set objWSH = nothing

      PUBLIC_Run_onMakeOfficial = TRUE

   End If

End Function

'-----------------------------------------------------------------------------------------------------------------------------

' This sub is used from _make_released.asp, loaded when a user presses the btnMakeReleased action button, as well as from

' internally within this file as part of the bulk release operation.

' This function basically removes the PV_ID entry from the WIP/PLANNED table, and adds it to the RELEASE_CONTENT table.

Function PUBLIC_MakeRelease ( NNrtag_id, NNpv_id  )

   On Error Resume Next

   objEH.ErrorRedirect = TRUE

   OraDatabase.Parameters.Add "PV_ID",   NNpv_id,                 ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "RTAG_ID", NNrtag_id,               ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "USER_ID", objAccessControl.UserId, ORAPARM_INPUT, ORATYPE_NUMBER

   objEH.TryORA ( OraSession )

   OraDatabase.ExecuteSQL _

     "BEGIN "&_

     " PK_ENVIRONMENT.MAKE_RELEASE ( :PV_ID, :RTAG_ID, :USER_ID );"&_

     "END; "

   objEH.CatchORA ( OraSession )

   OraDatabase.Parameters.Remove "PV_ID"

   OraDatabase.Parameters.Remove "RTAG_ID"

   OraDatabase.Parameters.Remove "USER_ID"

   ' return TRUE if operation was successful, else FALSE

   If objEH.LastOraFailed Then

      PUBLIC_MakeRelease = FALSE

   Else

      PUBLIC_MakeRelease = TRUE

      Dim objRC: Set objRC = New ReleaseChanged

      Call objRC.Run_ReleaseChanged(NNrtag_id,NNpv_id,enumRELEASE_CHANGE_MODE_PKG_RELEASED,true)

      Set objRC = Nothing

   End If

End Function

'=============================================================================================================================

' APPROVING AUTO/MANUAL BUILD PENDING VERSIONS - Used from _make_approved.asp as well as from within this file itself

'

' All functions in this section originally came from _make_approved.asp and were placed here to support their use in more

' than the original singular context. Being relocated here allows them to be used in the additional "Bulk Release" context.

'=============================================================================================================================

'------------------------------------------------------------------------------------------------------------------------------------------

' Currently, this function does not seem to be used. The call to it was commented out in the _make_approved.asp file from where it was

' originally called from.

'

Sub PRIVATE_NotifyInterestAutoBuild( NNrtag_id, NNpv_id )

   On Error Resume Next

   Dim Query_String, rsQry

   Query_String = _

   "   SELECT * FROM PACKAGE_INTEREST PI, PACKAGES PKG, PACKAGE_VERSIONS PV, USERS U,"&_

   "   RELEASE_TAGS RT, PROJECTS PRJ WHERE PKG.PKG_ID = PI.PKG_ID AND "&_

   "   RT.RTAG_ID = "& NNrtag_id &""&_

   "   AND PV.PV_ID = "& NNpv_id &" AND PV.PKG_ID = PKG.PKG_ID AND "&_

   "   PRJ.PROJ_ID = RT.PROJ_ID AND PRJ.PROJ_ID = PI.PROJ_ID AND U.USER_ID = PI.USER_ID"

   Set rsQry = OraDatabase.DbCreateDynaset( Query_String , cint(0) )

   If rsQry.RecordCount <> "" Then

      While ((NOT rsQry.BOF) AND (NOT rsQry.EOF))

         If rsQry("user_email") <> "" Then

            Send_Email  "Release Manager Notification",_

                        adminEmail, _

                        rsQry("user_email"),_

                        "New Version of Package "& rsQry("pkg_name") &" in Project " & rsQry("proj_name") &" on Release Branch " & rsQry("rtag_name") &" would be autobuild soon.",_

                        "You have received this email as a result of your interest in this package. If you do not wish to receive further emails then remove your package interest from the notifications area in Release Manager.",_

                        NULL

         End If

         rsQry.MoveNext

      Wend

   End If

   rsQry.Close()

   set rsQry = nothing

End Sub

'-------------------------------------------------------------------------------------

Sub PRIVATE_Get_Package_Issues(NNpv_id, SSsql)

   Dim sqlstr, rsTemp, DEVIiss

   sqlstr = "SELECT iss_db, iss_id, iss_state, notes FROM CQ_ISSUES WHERE pv_id="& NNpv_id &"  AND iss_state = 1"

   Set rsTemp = OraDatabase.DbCreateDynaset( sqlstr, cint(0))

   DEVIiss = "-1"

   While ((NOT rsTemp.BOF) AND (NOT rsTemp.EOF))

      If CInt(rsTemp("iss_db")) = CInt(enumCLEARQUEST_DEVI_ID) Then

         DEVIiss = DEVIiss &","& rsTemp("iss_id")

      End If

      rsTemp.MoveNext

   WEnd

   ' Construct SQL statement for CQ database

   If Len(DEVIiss) <> 1 OR Len(TDSEiss) <> 1 Then

      SSsql = ReadFile( rootPath & "queries\cq_issues.sql" )

      SSsql = Replace( SSsql, "/*enumCLEARQUEST_DEVI_ID*/", enumCLEARQUEST_DEVI_ID)

      SSsql = Replace( SSsql, "/*DEVIiss*/", DEVIiss)

   End If

   rsTemp.Close

   Set rsTemp = nothing

End Sub

'-------------------------------------------------------------------------------------

Function PRIVATE_MakeApproved (NNrtag_id, NNpv_id)

   OraDatabase.Parameters.Add "PV_ID",   NNpv_id,                 ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "RTAG_ID", NNrtag_id,               ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "USER_ID", objAccessControl.UserId, ORAPARM_INPUT, ORATYPE_NUMBER

   objEH.TryORA ( OraSession )

   On Error Resume Next

   OraDatabase.ExecuteSQL _

   "BEGIN "&_

   "   PK_ENVIRONMENT.MAKE_APPROVED ( :PV_ID, :RTAG_ID, :USER_ID ); "&_

   "END; "

   objEH.CatchORA ( OraSession )

   OraDatabase.Parameters.Remove "PV_ID"

   OraDatabase.Parameters.Remove "RTAG_ID"

   OraDatabase.Parameters.Remove "USER_ID"

   ' return TRUE if operation was successful, else FALSE

   If objEH.LastOraFailed Then

      PRIVATE_MakeApproved = FALSE

   Else

      PRIVATE_MakeApproved = TRUE

   End If

End Function

'-------------------------------------------------------------------------------------

' This function is called from _make_approved.asp, which is loaded when the btnApprovePackage

' action button is pressed. It is also called as part of the bulk release operation.

Function PUBLIC_ApproveRelease(NNrtag_id, NNpv_id, ByRef retParameters, isBulk)

   Dim retERRmsg

   Dim retALRTmsg

   Dim pkgType

   retParameters = ""

   pkgType = 0

   Set pkgInfoHash = CreateObject("Scripting.Dictionary")

   ' default return value

   PUBLIC_ApproveRelease = FALSE

   If ( NNrtag_id <> "") AND (NNpv_id <> "") Then

     ' -- Check not about to replace an SDK

     '-- Get Package details

     Call Get_Pkg_Info ( NNpv_id, NNrtag_id )

     ' Only process the package if it is still pending approval

     ' If the package has already been released, then we don't want to mark it as ready to build- again

     If pkgInfoHash.Item("dlocked") = "P" Then

         If pkgInfoHash.Item("build_type") = "A" Then

            'Check If There Already Exists A WIP Instance Of The Package In The Release

            If Check_Package_WIP_Already_Exists(NNrtag_id, NNpv_id) > 0 Then

              RaiseWIPExists = TRUE

            End If

            If PRIVATE_Is_Allowed_To_Approve_AutoBuild(NNrtag_id) Then

               '-- Approve Automatic-build package

               Call CheckRequirementsForMakeApproved ( NNpv_id, NNrtag_id, pkgType, retERRmsg, retALRTmsg, retParameters )

               If IsNull(retERRmsg) Then

                  If PRIVATE_MakeApproved (NNrtag_id, NNpv_id) = TRUE Then

                      If ( RaiseWIPExists = TRUE ) AND ( isBulk = FALSE ) Then

                         Call RaiseMsg ( enum_MSG_PACKAGE_WIP_EXISTS&"?rtag_id="& NNrtag_id & "&pv_id="& NNpv_id & "", NNpv_id )

                         ' RaiseMsg redirects loaded web page, so no return

                         ' Deal with BulkMakeRelease elsewhere

                      End If

                      ' indicate success

                      PUBLIC_ApproveRelease = TRUE

                  End If

               Else

                  Call RaiseMsg ( Eval(retERRmsg), NNrtag_id & "|" & NNpv_id & "|" & retParameters & "|" & "N" )

               End If

            Else

               ' Indicate an auto-build permission problem was detected in the global variable.

               ' This is only used within the context of a bulk release.

               AutoBuildPermissionDenied = TRUE

            End If

         Else

            If PRIVATE_Is_Allowed_To_Approve_ManualBuild(NNrtag_id) Then

               '-- Approve a Manual Build Release

               Call CheckRequirementsForMakeRelease ( NNpv_id, NNrtag_id, pkgType, retERRmsg, retALRTmsg, retParameters )

               If IsNull(retERRmsg) Then

                  If PUBLIC_MakeRelease ( NNrtag_id, NNpv_id ) = TRUE Then

                  ' If all went well, initiate the generation of release notes, and email any interested parties

                     If PUBLIC_Run_onMakeOfficial ( NNrtag_id, NNpv_id ) = TRUE Then

                        Call PUBLIC_NotifyInterestManualBuild( NNrtag_id, NNpv_id )

                        ' indicate success

                        PUBLIC_ApproveRelease = TRUE

                     End If

                  End If

               Else

                  Call RaiseMsg ( Eval(retERRmsg), NNrtag_id & "|" & NNpv_id & "|" & retParameters & "|" & "N" )

               End If

            Else

               ' Indicate a manual-build permission problem was detected in the global variable

               ' This is only used within the context of a bulk release.

               ManualBuildPermissionDenied = TRUE

            End If

         End If

       Else

         ' Package not in a state to be approved for building

         '

         PUBLIC_ApproveRelease = TRUE

       End If

   End If

End Function

'-----------------------------------------------------------------------------------------------------------------------------

'=============================================================================================================================

' MAKING A BULK RELEASE from a list of PV_IDs for a specified release

'

' This section contains the new "Bulk Release' code. This function is tied to the use of the make bulk release button.

'

'=============================================================================================================================

'-----------------------------------------------------------------------------------------------------------------------------

' This public function is called from the make_bulk_release.asp file, loaded when a user presses the Make Bulk Release

' button when viewing items on the Pending Tab of a release area.

'

' The function processes a list of PV_ID's that cam from the pending tab of a release, formed from each item whose checkbox

' was checked. There are 3 different types of item to deal with, and this function will deal with them in the order shown

' below:

'    1) Subtractive merge operations

'    2) Additive merge operations

'    3) Manual/Auto build items

'

' This order was chosen by design to ensure that in the end effect upon a release, the manual and auto build items

' take precedence over merge candidates. This occurs naturally if we process manual/auto build items last.

'

' Parameters:

'   NNrtag_id       The release area

'   NN_pv_id_list   A list of PV_IDs representing pending items to be approved for release or merge.

'

Sub PUBLIC_MakeBulkRelease (NNrtag_id, NN_pv_id_list)

   Dim initialList         ' holds all items

   Dim remainingList1()    ' To hold additive merge items

   Dim remainingList2()    ' To hold auto/manual build items that need to be validated before processing

   Dim remainingList3()    ' To hold auto/manual build items that can be processed

   Dim remainingList4()    ' To hold auto/manual build items that cannot be processed due to validation failures

   Dim len_remainingList1

   Dim len_remainingList2

   Dim len_remainingList3

   Dim len_remainingList4

   Dim pvId

   Dim retParameters

   Dim allowedToApproveMerge

   ' determine in advance if user is allowed to approve merges

   allowedToApproveMerge = PRIVATE_Is_Allowed_To_Approve_Merge(NNrtag_id)

   ' ready the remaining list index to extract additive merges and manual/auto build items

   len_remainingList1 = 0

   AutoBuildPermissionDenied   = FALSE

   ManualBuildPermissionDenied = FALSE

   ' Remove any spaces and split the pv_id list into a string array

   initialList = Split ( Replace(NN_pv_id_list, " ", "" ), "," )

   ' Process each subtractive merge item in the string array.

   ' We do these first to cleanup the release somewhat before we start adding new stuff in

   For Each pvId In initialList

      If IsNumeric(pvId) Then

         ' Test to see if this PV_ID represents a pending SUBTRACTIVE merge operation, and proceed with it if permissions allow

         If PRIVATE_Is_A_Valid_Pending_Merge(NNrtag_id, pvId, "S") Then

            If allowedToApproveMerge Then

               Call PRIVATE_ApproveMerge(NNrtag_id, pvId, "S")

            Else

               AutoBuildPermissionDenied   = TRUE

               ManualBuildPermissionDenied = TRUE

            End If

         Else

            ' add item to the remaining list for the next loop to process

            len_remainingList1 = len_remainingList1 + 1

            ReDim Preserve remainingList1(len_remainingList1)

            remainingList1(len_remainingList1 - 1) = pvId

         End If

      End If

   Next

   ' ready the remaining list index to extract manual/auto build items

   len_remainingList2 = 0

   ' Now process each additive merge item in the string array

   ' We do these before finally processing any auto/manual build items so that the latter take precedence in their eventual

   ' effect upon the release.

   For Each pvId In remainingList1

      ' Test to see if this PV_ID represents a pending ADDITIVE merge operation, and proceed with it if permissions allow

      If PRIVATE_Is_A_Valid_Pending_Merge(NNrtag_id, pvId, "A") Then

         If allowedToApproveMerge Then

            Call PRIVATE_ApproveMerge(NNrtag_id, pvId, "A")

         Else

            AutoBuildPermissionDenied   = TRUE

            ManualBuildPermissionDenied = TRUE

         End If

      Else

         ' add item to the remaining list for the next loop to process

         len_remainingList2 = len_remainingList2 + 1

         ReDim Preserve remainingList2(len_remainingList2)

         remainingList2(len_remainingList2 - 1) = pvId

      End If

   Next

   ' ready the remaining list index to extract manual/auto build items

   len_remainingList3 = 0

   len_remainingList4 = 0

   ' We cannot bulk release multiple WIPS of the same pkg_id because the modified_stamp in the package versions

   ' table for each one will become identical upon doing so (since they are simultaneously being bulk released)

   ' and the build daemon will therefore not necessarily build them in the order the user needs them to be built in.

   ' This is especially the case with multiple WIPS for packages that are in fact database patches.

   ' We have to bust out those pv_ids from the ones we can bulk release, and tell the user about them afterwards,

   ' basically forcing the user to approve them one by one.

   ' We use a few dictionaries to bust apart the pv_id's

   Dim pkgIdsAndCounts

   Dim pkgIdsAndPvIds

   Dim pkgId

   Set pkgIdsAndCounts = Server.CreateObject("Scripting.Dictionary")

   Set pkgIdsAndPvIds = Server.CreateObject("Scripting.Dictionary")

   ' Count instances of pkg_id's and for each pkg_id, create a list of pv_id's, using the dictionaries declared earlier

   For Each pvId In remainingList2

      If ( NNrtag_id <> "") AND (pvId <> "") Then

         pkgId = Get_Pkg_Id_For_Pv_Id(pvId)

         If pkgIdsAndCounts.Exists(pkgId) Then

            pkgIdsAndCounts.Item(pkgId) = CStr(CInt(pkgIdsAndCounts.Item(pkgId)) + 1)

            pkgIdsAndPvIds.Item(pkgId) = pkgIdsAndPvIds.Item(pkgId) & "," & pvId

         Else

            pkgIdsAndCounts.Add pkgId, "1"

            pkgIdsAndPvIds.Add pkgId, pvId

         End If

      End If

   Next

   ' Now use the pkg_id counts to distinguish between the pv_id's we can proceed with and those we cannot.

   ' The ones we can proceed with are accumulated into remainingList3, and the ones we cannot are

   ' accumulated into remainingList4

   Dim i,a

   a = pkgIdsAndCounts.Keys

   For i=0 to pkgIdsAndCounts.Count-1

      If pkgIdsAndCounts.Item(a(i)) = "1" Then

         len_remainingList3 = len_remainingList3 + 1

         ReDim Preserve remainingList3(len_remainingList3)

         remainingList3(len_remainingList3 - 1) = pkgIdsAndPvIds.Item(a(i))

      Else

         len_remainingList4 = len_remainingList4 + 1

         ReDim Preserve remainingList4(len_remainingList4)

         remainingList4(len_remainingList4 - 1) = pkgIdsAndPvIds.Item(a(i))

      End If

   Next

   ' free dictionaries

   Set pkgIdsAndCounts = nothing

   Set pkgIdsAndPvIds = nothing

   ' Now process each new and valid Auto/Manaul build item in the string array

   RaiseWIPExists = FALSE

   For Each pvId In remainingList3

      Call PUBLIC_ApproveRelease(NNrtag_id, pvId, retParameters, TRUE)

   Next

   If ( RaiseWIPExists = TRUE ) Then

     Call RaiseMsg ( enum_MSG_PACKAGE_WIP_EXISTS & "?rtag_id="& request("rtag_id") & "&pv_id="& request("pv_id") & "", "" )

     ' RaiseMsg redirects loaded web page, so no return

   End If

   ' Issue a warning for when some items could not be bulk released due to having the same package ID's

   If len_remainingList4 > 0 Then

      Call RaiseMsg ( enum_MSG_PACKAGE_WIP_EXISTS_BULK_RELEASE & "?rtag_id="& request("rtag_id") & "&pv_id="& request("pv_id") & "", "" )

   End If

   ' If any items were not approved for release due to permission errors, issue an alert to the user

   If AutoBuildPermissionDenied = TRUE OR ManualBuildPermissionDenied = TRUE Then

      Call RaiseMsg( enum_MSG_PERMISSION_PROBLEMS_BULK_RELEASE & "?rtag_id="& request("rtag_id") & "&pv_id="& request("pv_id") & "", "" )

   End If

End Sub

'-----------------------------------------------------------------------------------------------------------------------------

'=============================================================================================================================

' MAKING A BULK REJECT from a list of PV_IDs for a specified release

'

' This section contains the new "Bulk Reject' code. This function is tied to the use of the make bulk reject button.

'

'=============================================================================================================================

'-----------------------------------------------------------------------------------------------------------------------------

' This public function is called from the make_bulk_reject.asp file, loaded when a user presses the Make Bulk Reject

' button when viewing items on the Pending Tab of a release area.

'

' The function processes a list of PV_ID's that cam from the pending tab of a release, formed from each item whose checkbox

' was checked. There are 3 different types of item to deal with:

'    1) Subtractive merge operations

'    2) Additive merge operations

'    3) Manual/Auto build items

'

'

' Parameters:

'   NNrtag_id       The release area

'   NN_pv_id_list   A list of PV_IDs representing pending items to be approved for release or merge.

'

Sub PUBLIC_MakeBulkReject (NNrtag_id, NN_pv_id_list)

   Dim initialList         ' holds all items

   Dim pvId

   Dim allowedToApproveMerge

   Dim errorSeen

   ' Init

   errorSeen = 0

   ' determine in advance if user is allowed to approve merges

   allowedToApproveMerge = PRIVATE_Is_Allowed_To_Approve_Merge(NNrtag_id)

   If allowedToApproveMerge Then

    ' Remove any spaces and split the pv_id list into a string array

    initialList = Split ( Replace(NN_pv_id_list, " ", "" ), "," )

    For Each pvId In initialList

        Call PRIVATE_MakeReject(NNrtag_id,pvId, errorSeen)

    Next

      If errorSeen <> 0 Then

        Call RaiseMsg( enum_MSG_ERROR & "?rtag_id="& request("rtag_id") & "&pv_id="& request("pv_id"), _ 

            "An error was encounted rejecting one or more of the packages.<p>Packages that have not been rejected are in the 'Pending' state." )

      End If

   Else

      Call RaiseMsg( enum_MSG_ERROR & "?rtag_id="& request("rtag_id") & "&pv_id="& request("pv_id"), _ 

            "You do not appear to have permissions to perform the Bulk Reject operation" )

   End If

End Sub

'-----------------------------------------------------------------------------------------------------------------------------

' This public function is called from the make_bulk_reject.asp file, loaded when a user presses the Make Bulk Reject

'   Private function to reject a package-version

Sub PRIVATE_MakeReject(NNrtag_id,NNpvId, ByRef NNerrorSeen)

       objEH.TryORA ( OraSession )

   On Error Resume Next

   OraDatabase.Parameters.Add "PV_ID",   NNpvId,                  ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "RTAG_ID", NNrtag_id,               ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.Parameters.Add "USER_ID", objAccessControl.UserId, ORAPARM_INPUT, ORATYPE_NUMBER

   OraDatabase.ExecuteSQL _

   "BEGIN "&_

   " PK_ENVIRONMENT.MAKE_REJECT ( :PV_ID, :RTAG_ID, :USER_ID ); "&_

   "END; "

   objEH.CatchORA ( OraSession )

   OraDatabase.Parameters.Remove "PV_ID"

   OraDatabase.Parameters.Remove "RTAG_ID"

   OraDatabase.Parameters.Remove "USER_ID"

End Sub 

'-----------------------------------------------------------------------------------------------------------------------------

%>