/******************************************************************************/ /* Legacy Header File */ /* Not recommended for use in new projects. */ /* Please use the msp430.h file or the device specific header file */ /******************************************************************************/ /******************************************************************** * * Standard register and bit definitions for the Texas Instruments * MSP430 microcontroller. * * This file supports assembler and C development for * MSP430x42x0 devices. * * Texas Instruments, Version 1.3 * * * Rev. 1.0, Inital Setup * Rev. 1.1, Added some definitons for LCD_A Module * Rev. 1.2, Removed definitions for BTRESET * Rev. 1.3, added definitions for Interrupt Vectors xxIV * ********************************************************************/ #ifndef __msp430x42x0 #define __msp430x42x0 #ifdef __cplusplus extern "C" { #endif /*----------------------------------------------------------------------------*/ /* PERIPHERAL FILE MAP */ /*----------------------------------------------------------------------------*/ /* External references resolved by a device-specific linker command file */ #define SFR_8BIT(address) extern volatile unsigned char address #define SFR_16BIT(address) extern volatile unsigned int address /************************************************************ * STANDARD BITS ************************************************************/ #define BIT0 (0x0001) #define BIT1 (0x0002) #define BIT2 (0x0004) #define BIT3 (0x0008) #define BIT4 (0x0010) #define BIT5 (0x0020) #define BIT6 (0x0040) #define BIT7 (0x0080) #define BIT8 (0x0100) #define BIT9 (0x0200) #define BITA (0x0400) #define BITB (0x0800) #define BITC (0x1000) #define BITD (0x2000) #define BITE (0x4000) #define BITF (0x8000) /************************************************************ * STATUS REGISTER BITS ************************************************************/ #define C (0x0001) #define Z (0x0002) #define N (0x0004) #define V (0x0100) #define GIE (0x0008) #define CPUOFF (0x0010) #define OSCOFF (0x0020) #define SCG0 (0x0040) #define SCG1 (0x0080) /* Low Power Modes coded with Bits 4-7 in SR */ #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define LPM0 (CPUOFF) #define LPM1 (SCG0+CPUOFF) #define LPM2 (SCG1+CPUOFF) #define LPM3 (SCG1+SCG0+CPUOFF) #define LPM4 (SCG1+SCG0+OSCOFF+CPUOFF) /* End #defines for assembler */ #else /* Begin #defines for C */ #define LPM0_bits (CPUOFF) #define LPM1_bits (SCG0+CPUOFF) #define LPM2_bits (SCG1+CPUOFF) #define LPM3_bits (SCG1+SCG0+CPUOFF) #define LPM4_bits (SCG1+SCG0+OSCOFF+CPUOFF) #include "in430.h" #define LPM0 _bis_SR_register(LPM0_bits) /* Enter Low Power Mode 0 */ #define LPM0_EXIT _bic_SR_register_on_exit(LPM0_bits) /* Exit Low Power Mode 0 */ #define LPM1 _bis_SR_register(LPM1_bits) /* Enter Low Power Mode 1 */ #define LPM1_EXIT _bic_SR_register_on_exit(LPM1_bits) /* Exit Low Power Mode 1 */ #define LPM2 _bis_SR_register(LPM2_bits) /* Enter Low Power Mode 2 */ #define LPM2_EXIT _bic_SR_register_on_exit(LPM2_bits) /* Exit Low Power Mode 2 */ #define LPM3 _bis_SR_register(LPM3_bits) /* Enter Low Power Mode 3 */ #define LPM3_EXIT _bic_SR_register_on_exit(LPM3_bits) /* Exit Low Power Mode 3 */ #define LPM4 _bis_SR_register(LPM4_bits) /* Enter Low Power Mode 4 */ #define LPM4_EXIT _bic_SR_register_on_exit(LPM4_bits) /* Exit Low Power Mode 4 */ #endif /* End #defines for C */ /************************************************************ * PERIPHERAL FILE MAP ************************************************************/ /************************************************************ * SPECIAL FUNCTION REGISTER ADDRESSES + CONTROL BITS ************************************************************/ SFR_8BIT(IE1); /* Interrupt Enable 1 */ #define WDTIE (0x01) #define OFIE (0x02) #define NMIIE (0x10) #define ACCVIE (0x20) SFR_8BIT(IFG1); /* Interrupt Flag 1 */ #define WDTIFG (0x01) /* Watchdog Interrupt Flag */ #define OFIFG (0x02) /* Osc. Fault Interrupt Flag */ #define PORIFG (0x04) /* Power On Interrupt Flag */ #define RSTIFG (0x08) /* Reset Interrupt Flag */ #define NMIIFG (0x10) /* NMI Interrupt Flag */ SFR_8BIT(IE2); /* Interrupt Enable 2 */ #define BTIE (0x80) SFR_8BIT(IFG2); /* Interrupt Flag 2 */ #define BTIFG (0x80) /************************************************************ * WATCHDOG TIMER ************************************************************/ #define __MSP430_HAS_WDT__ /* Definition to show that Module is available */ SFR_16BIT(WDTCTL); /* Watchdog Timer Control */ /* The bit names have been prefixed with "WDT" */ #define WDTIS0 (0x0001) #define WDTIS1 (0x0002) #define WDTSSEL (0x0004) #define WDTCNTCL (0x0008) #define WDTTMSEL (0x0010) #define WDTNMI (0x0020) #define WDTNMIES (0x0040) #define WDTHOLD (0x0080) #define WDTPW (0x5A00) /* WDT-interval times [1ms] coded with Bits 0-2 */ /* WDT is clocked by fSMCLK (assumed 1MHz) */ #define WDT_MDLY_32 (WDTPW+WDTTMSEL+WDTCNTCL) /* 32ms interval (default) */ #define WDT_MDLY_8 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS0) /* 8ms " */ #define WDT_MDLY_0_5 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1) /* 0.5ms " */ #define WDT_MDLY_0_064 (WDTPW+WDTTMSEL+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ /* WDT is clocked by fACLK (assumed 32KHz) */ #define WDT_ADLY_1000 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL) /* 1000ms " */ #define WDT_ADLY_250 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ #define WDT_ADLY_16 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ #define WDT_ADLY_1_9 (WDTPW+WDTTMSEL+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ /* Watchdog mode -> reset after expired time */ /* WDT is clocked by fSMCLK (assumed 1MHz) */ #define WDT_MRST_32 (WDTPW+WDTCNTCL) /* 32ms interval (default) */ #define WDT_MRST_8 (WDTPW+WDTCNTCL+WDTIS0) /* 8ms " */ #define WDT_MRST_0_5 (WDTPW+WDTCNTCL+WDTIS1) /* 0.5ms " */ #define WDT_MRST_0_064 (WDTPW+WDTCNTCL+WDTIS1+WDTIS0) /* 0.064ms " */ /* WDT is clocked by fACLK (assumed 32KHz) */ #define WDT_ARST_1000 (WDTPW+WDTCNTCL+WDTSSEL) /* 1000ms " */ #define WDT_ARST_250 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS0) /* 250ms " */ #define WDT_ARST_16 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1) /* 16ms " */ #define WDT_ARST_1_9 (WDTPW+WDTCNTCL+WDTSSEL+WDTIS1+WDTIS0) /* 1.9ms " */ /* INTERRUPT CONTROL */ /* These two bits are defined in the Special Function Registers */ /* #define WDTIE 0x01 */ /* #define WDTIFG 0x01 */ /************************************************************ * DIGITAL I/O Port1/2 ************************************************************/ #define __MSP430_HAS_PORT1__ /* Definition to show that Module is available */ #define __MSP430_HAS_PORT2__ /* Definition to show that Module is available */ SFR_8BIT(P1IN); /* Port 1 Input */ SFR_8BIT(P1OUT); /* Port 1 Output */ SFR_8BIT(P1DIR); /* Port 1 Direction */ SFR_8BIT(P1IFG); /* Port 1 Interrupt Flag */ SFR_8BIT(P1IES); /* Port 1 Interrupt Edge Select */ SFR_8BIT(P1IE); /* Port 1 Interrupt Enable */ SFR_8BIT(P1SEL); /* Port 1 Selection */ SFR_8BIT(P2IN); /* Port 2 Input */ SFR_8BIT(P2OUT); /* Port 2 Output */ SFR_8BIT(P2DIR); /* Port 2 Direction */ SFR_8BIT(P2IFG); /* Port 2 Interrupt Flag */ SFR_8BIT(P2IES); /* Port 2 Interrupt Edge Select */ SFR_8BIT(P2IE); /* Port 2 Interrupt Enable */ SFR_8BIT(P2SEL); /* Port 2 Selection */ /************************************************************ * DIGITAL I/O Port5/6 ************************************************************/ #define __MSP430_HAS_PORT5__ /* Definition to show that Module is available */ #define __MSP430_HAS_PORT6__ /* Definition to show that Module is available */ SFR_8BIT(P5IN); /* Port 5 Input */ SFR_8BIT(P5OUT); /* Port 5 Output */ SFR_8BIT(P5DIR); /* Port 5 Direction */ SFR_8BIT(P5SEL); /* Port 5 Selection */ SFR_8BIT(P6IN); /* Port 6 Input */ SFR_8BIT(P6OUT); /* Port 6 Output */ SFR_8BIT(P6DIR); /* Port 6 Direction */ SFR_8BIT(P6SEL); /* Port 6 Selection */ /************************************************************ * BASIC TIMER ************************************************************/ #define __MSP430_HAS_BT__ /* Definition to show that Module is available */ SFR_8BIT(BTCTL); /* Basic Timer Control */ /* The bit names have been prefixed with "BT" */ #define BTIP0 (0x01) #define BTIP1 (0x02) #define BTIP2 (0x04) #define BTFRFQ0 (0x08) #define BTFRFQ1 (0x10) #define BTDIV (0x20) /* fCLK2 = ACLK:256 */ #define BTHOLD (0x40) /* BT1 is held if this bit is set */ #define BTSSEL (0x80) /* fBT = fMCLK (main clock) */ SFR_8BIT(BTCNT1); /* Basic Timer Count 1 */ SFR_8BIT(BTCNT2); /* Basic Timer Count 2 */ /* Frequency of the BTCNT2 coded with Bit 5 and 7 in BTCTL */ #define BT_fCLK2_ACLK (0x00) #define BT_fCLK2_ACLK_DIV256 (BTDIV) #define BT_fCLK2_MCLK (BTSSEL) /* Interrupt interval time fINT coded with Bits 0-2 in BTCTL */ #define BT_fCLK2_DIV2 (0x00) /* fINT = fCLK2:2 (default) */ #define BT_fCLK2_DIV4 (BTIP0) /* fINT = fCLK2:4 */ #define BT_fCLK2_DIV8 (BTIP1) /* fINT = fCLK2:8 */ #define BT_fCLK2_DIV16 (BTIP1+BTIP0) /* fINT = fCLK2:16 */ #define BT_fCLK2_DIV32 (BTIP2) /* fINT = fCLK2:32 */ #define BT_fCLK2_DIV64 (BTIP2+BTIP0) /* fINT = fCLK2:64 */ #define BT_fCLK2_DIV128 (BTIP2+BTIP1) /* fINT = fCLK2:128 */ #define BT_fCLK2_DIV256 (BTIP2+BTIP1+BTIP0) /* fINT = fCLK2:256 */ /* Frequency of LCD coded with Bits 3-4 */ #define BT_fLCD_DIV32 (0x00) /* fLCD = fACLK:32 (default) */ #define BT_fLCD_DIV64 (BTFRFQ0) /* fLCD = fACLK:64 */ #define BT_fLCD_DIV128 (BTFRFQ1) /* fLCD = fACLK:128 */ #define BT_fLCD_DIV256 (BTFRFQ1+BTFRFQ0) /* fLCD = fACLK:256 */ /* LCD frequency values with fBT=fACLK */ #define BT_fLCD_1K (0x00) /* fACLK:32 (default) */ #define BT_fLCD_512 (BTFRFQ0) /* fACLK:64 */ #define BT_fLCD_256 (BTFRFQ1) /* fACLK:128 */ #define BT_fLCD_128 (BTFRFQ1+BTFRFQ0) /* fACLK:256 */ /* LCD frequency values with fBT=fMCLK */ #define BT_fLCD_31K (BTSSEL) /* fMCLK:32 */ #define BT_fLCD_15_5K (BTSSEL+BTFRFQ0) /* fMCLK:64 */ #define BT_fLCD_7_8K (BTSSEL+BTFRFQ1+BTFRFQ0) /* fMCLK:256 */ /* with assumed vlues of fACLK=32KHz, fMCLK=1MHz */ /* fBT=fACLK is thought for longer interval times */ #define BT_ADLY_0_064 (0x00) /* 0.064ms interval (default) */ #define BT_ADLY_0_125 (BTIP0) /* 0.125ms " */ #define BT_ADLY_0_25 (BTIP1) /* 0.25ms " */ #define BT_ADLY_0_5 (BTIP1+BTIP0) /* 0.5ms " */ #define BT_ADLY_1 (BTIP2) /* 1ms " */ #define BT_ADLY_2 (BTIP2+BTIP0) /* 2ms " */ #define BT_ADLY_4 (BTIP2+BTIP1) /* 4ms " */ #define BT_ADLY_8 (BTIP2+BTIP1+BTIP0) /* 8ms " */ #define BT_ADLY_16 (BTDIV) /* 16ms " */ #define BT_ADLY_32 (BTDIV+BTIP0) /* 32ms " */ #define BT_ADLY_64 (BTDIV+BTIP1) /* 64ms " */ #define BT_ADLY_125 (BTDIV+BTIP1+BTIP0) /* 125ms " */ #define BT_ADLY_250 (BTDIV+BTIP2) /* 250ms " */ #define BT_ADLY_500 (BTDIV+BTIP2+BTIP0) /* 500ms " */ #define BT_ADLY_1000 (BTDIV+BTIP2+BTIP1) /* 1000ms " */ #define BT_ADLY_2000 (BTDIV+BTIP2+BTIP1+BTIP0) /* 2000ms " */ /* fCLK2=fMCLK (1MHz) is thought for short interval times */ /* the timing for short intervals is more precise than ACLK */ /* NOTE */ /* Be sure that the SCFQCTL-Register is set to 01Fh so that fMCLK=1MHz */ /* Too low interval time results in interrupts too frequent for the processor to handle! */ #define BT_MDLY_0_002 (BTSSEL) /* 0.002ms interval *** interval times */ #define BT_MDLY_0_004 (BTSSEL+BTIP0) /* 0.004ms " *** too short for */ #define BT_MDLY_0_008 (BTSSEL+BTIP1) /* 0.008ms " *** interrupt */ #define BT_MDLY_0_016 (BTSSEL+BTIP1+BTIP0) /* 0.016ms " *** handling */ #define BT_MDLY_0_032 (BTSSEL+BTIP2) /* 0.032ms " */ #define BT_MDLY_0_064 (BTSSEL+BTIP2+BTIP0) /* 0.064ms " */ #define BT_MDLY_0_125 (BTSSEL+BTIP2+BTIP1) /* 0.125ms " */ #define BT_MDLY_0_25 (BTSSEL+BTIP2+BTIP1+BTIP0)/* 0.25ms " */ /* Reset/Hold coded with Bits 6-7 in BT(1)CTL */ /* this is for BT */ //#define BTRESET_CNT1 (BTRESET) /* BTCNT1 is reset while BTRESET is set */ //#define BTRESET_CNT1_2 (BTRESET+BTDIV) /* BTCNT1 .AND. BTCNT2 are reset while ~ is set */ /* this is for BT1 */ #define BTHOLD_CNT1 (BTHOLD) /* BTCNT1 is held while BTHOLD is set */ #define BTHOLD_CNT1_2 (BTHOLD+BTDIV) /* BT1CNT1 .AND. BT1CNT2 are held while ~ is set */ /* INTERRUPT CONTROL BITS */ /* #define BTIE 0x80 */ /* #define BTIFG 0x80 */ /************************************************************ * SYSTEM CLOCK, FLL+ (x41x) ************************************************************/ #define __MSP430_HAS_FLLPLUS_SMALL__ /* Definition to show that Module is available */ SFR_8BIT(SCFI0); /* System Clock Frequency Integrator 0 */ #define FN_2 (0x04) /* fDCOCLK = 1.4-12MHz*/ #define FN_3 (0x08) /* fDCOCLK = 2.2-17Mhz*/ #define FN_4 (0x10) /* fDCOCLK = 3.2-25Mhz*/ #define FN_8 (0x20) /* fDCOCLK = 5-40Mhz*/ #define FLLD0 (0x40) /* Loop Divider Bit : 0 */ #define FLLD1 (0x80) /* Loop Divider Bit : 1 */ #define FLLD_1 (0x00) /* Multiply Selected Loop Freq. By 1 */ #define FLLD_2 (0x40) /* Multiply Selected Loop Freq. By 2 */ #define FLLD_4 (0x80) /* Multiply Selected Loop Freq. By 4 */ #define FLLD_8 (0xC0) /* Multiply Selected Loop Freq. By 8 */ SFR_8BIT(SCFI1); /* System Clock Frequency Integrator 1 */ SFR_8BIT(SCFQCTL); /* System Clock Frequency Control */ /* System clock frequency values fMCLK coded with Bits 0-6 in SCFQCTL */ /* #define SCFQ_32K 0x00 fMCLK=1*fACLK only a range from */ #define SCFQ_64K (0x01) /* fMCLK=2*fACLK 1+1 to 127+1 is possible */ #define SCFQ_128K (0x03) /* fMCLK=4*fACLK */ #define SCFQ_256K (0x07) /* fMCLK=8*fACLK */ #define SCFQ_512K (0x0F) /* fMCLK=16*fACLK */ #define SCFQ_1M (0x1F) /* fMCLK=32*fACLK */ #define SCFQ_2M (0x3F) /* fMCLK=64*fACLK */ #define SCFQ_4M (0x7F) /* fMCLK=128*fACLK */ #define SCFQ_M (0x80) /* Modulation Disable */ SFR_8BIT(FLL_CTL0); /* FLL+ Control 0 */ #define DCOF (0x01) /* DCO Fault Flag */ #define LFOF (0x02) /* Low Frequency Oscillator Fault Flag */ #define XT1OF (0x04) /* High Frequency Oscillator Fault Flag */ #define OSCCAP0 (0x10) /* XIN/XOUT Cap 0 */ #define OSCCAP1 (0x20) /* XIN/XOUT Cap 1 */ #define XTS_FLL (0x40) /* 1: Selects high-freq. oscillator */ #define DCOPLUS (0x80) /* DCO+ Enable */ #define XCAP0PF (0x00) /* XIN Cap = XOUT Cap = 0pf */ #define XCAP10PF (0x10) /* XIN Cap = XOUT Cap = 10pf */ #define XCAP14PF (0x20) /* XIN Cap = XOUT Cap = 14pf */ #define XCAP18PF (0x30) /* XIN Cap = XOUT Cap = 18pf */ #define OSCCAP_0 (0x00) /* XIN Cap = XOUT Cap = 0pf */ #define OSCCAP_1 (0x10) /* XIN Cap = XOUT Cap = 10pf */ #define OSCCAP_2 (0x20) /* XIN Cap = XOUT Cap = 14pf */ #define OSCCAP_3 (0x30) /* XIN Cap = XOUT Cap = 18pf */ SFR_8BIT(FLL_CTL1); /* FLL+ Control 1 */ #define FLL_DIV0 (0x01) /* FLL+ Divide Px.x/ACLK 0 */ #define FLL_DIV1 (0x02) /* FLL+ Divide Px.x/ACLK 1 */ #define FLL_DIV_1 (0x00) /* FLL+ Divide Px.x/ACLK By 1 */ #define FLL_DIV_2 (0x01) /* FLL+ Divide Px.x/ACLK By 2 */ #define FLL_DIV_4 (0x02) /* FLL+ Divide Px.x/ACLK By 4 */ #define FLL_DIV_8 (0x03) /* FLL+ Divide Px.x/ACLK By 8 */ /* INTERRUPT CONTROL BITS */ /* These two bits are defined in the Special Function Registers */ /* #define OFIFG 0x02 */ /* #define OFIE 0x02 */ /************************************************************ * LCD_A ************************************************************/ #define __MSP430_HAS_LCD_A__ /* Definition to show that Module is available */ SFR_8BIT(LCDACTL); /* LCD_A Control Register */ #define LCDON (0x01) #define LCDSON (0x04) #define LCDMX0 (0x08) #define LCDMX1 (0x10) #define LCDFREQ0 (0x20) #define LCDFREQ1 (0x40) #define LCDFREQ2 (0x80) /* Display modes coded with Bits 2-4 */ #define LCDSTATIC (LCDSON) #define LCD2MUX (LCDMX0+LCDSON) #define LCD3MUX (LCDMX1+LCDSON) #define LCD4MUX (LCDMX1+LCDMX0+LCDSON) /* Frequency select code with Bits 5-7 */ #define LCDFREQ_32 (0x00) /* LCD Freq: ACLK divided by 32 */ #define LCDFREQ_64 (0x20) /* LCD Freq: ACLK divided by 64 */ #define LCDFREQ_96 (0x40) /* LCD Freq: ACLK divided by 96 */ #define LCDFREQ_128 (0x60) /* LCD Freq: ACLK divided by 128 */ #define LCDFREQ_192 (0x80) /* LCD Freq: ACLK divided by 192 */ #define LCDFREQ_256 (0xA0) /* LCD Freq: ACLK divided by 256 */ #define LCDFREQ_384 (0xC0) /* LCD Freq: ACLK divided by 384 */ #define LCDFREQ_512 (0xE0) /* LCD Freq: ACLK divided by 512 */ SFR_8BIT(LCDAPCTL0); /* LCD_A Port Control Register 0 */ #define LCDS0 (0x01) /* LCD Segment 0 to 3 Enable. */ #define LCDS4 (0x02) /* LCD Segment 4 to 7 Enable. */ #define LCDS8 (0x04) /* LCD Segment 8 to 11 Enable. */ #define LCDS12 (0x08) /* LCD Segment 12 to 15 Enable. */ #define LCDS16 (0x10) /* LCD Segment 16 to 19 Enable. */ #define LCDS20 (0x20) /* LCD Segment 20 to 23 Enable. */ #define LCDS24 (0x40) /* LCD Segment 24 to 27 Enable. */ #define LCDS28 (0x80) /* LCD Segment 28 to 31 Enable. */ SFR_8BIT(LCDAPCTL1); /* LCD_A Port Control Register 1 */ #define LCDS32 (0x01) /* LCD Segment 32 to 35 Enable. */ #define LCDS36 (0x02) /* LCD Segment 36 to 39 Enable. */ SFR_8BIT(LCDAVCTL0); /* LCD_A Voltage Control Register 0 */ #define LCD2B (0x01) /* Selects 1/2 bias. */ #define VLCDREF0 (0x02) /* Selects reference voltage for regulated charge pump: 0 */ #define VLCDREF1 (0x04) /* Selects reference voltage for regulated charge pump: 1 */ #define LCDCPEN (0x08) /* LCD Voltage Charge Pump Enable. */ #define VLCDEXT (0x10) /* Select external source for VLCD. */ #define LCDREXT (0x20) /* Selects external connections for LCD mid voltages. */ #define LCDR03EXT (0x40) /* Selects external connection for lowest LCD voltage. */ /* Reference voltage source select for the regulated charge pump */ #define VLCDREF_0 (0<<1) /* Internal */ #define VLCDREF_1 (1<<1) /* External */ #define VLCDREF_2 (2<<1) /* Reserved */ #define VLCDREF_3 (3<<1) /* Reserved */ SFR_8BIT(LCDAVCTL1); /* LCD_A Voltage Control Register 1 */ #define VLCD0 (0x02) /* VLCD select: 0 */ #define VLCD1 (0x04) /* VLCD select: 1 */ #define VLCD2 (0x08) /* VLCD select: 2 */ #define VLCD3 (0x10) /* VLCD select: 3 */ /* Charge pump voltage selections */ #define VLCD_0 (0<<1) /* Charge pump disabled */ #define VLCD_1 (1<<1) /* VLCD = 2.60V */ #define VLCD_2 (2<<1) /* VLCD = 2.66V */ #define VLCD_3 (3<<1) /* VLCD = 2.72V */ #define VLCD_4 (4<<1) /* VLCD = 2.78V */ #define VLCD_5 (5<<1) /* VLCD = 2.84V */ #define VLCD_6 (6<<1) /* VLCD = 2.90V */ #define VLCD_7 (7<<1) /* VLCD = 2.96V */ #define VLCD_8 (8<<1) /* VLCD = 3.02V */ #define VLCD_9 (9<<1) /* VLCD = 3.08V */ #define VLCD_10 (10<<1) /* VLCD = 3.14V */ #define VLCD_11 (11<<1) /* VLCD = 3.20V */ #define VLCD_12 (12<<1) /* VLCD = 3.26V */ #define VLCD_13 (12<<1) /* VLCD = 3.32V */ #define VLCD_14 (13<<1) /* VLCD = 3.38V */ #define VLCD_15 (15<<1) /* VLCD = 3.44V */ #define VLCD_DISABLED (0<<1) /* Charge pump disabled */ #define VLCD_2_60 (1<<1) /* VLCD = 2.60V */ #define VLCD_2_66 (2<<1) /* VLCD = 2.66V */ #define VLCD_2_72 (3<<1) /* VLCD = 2.72V */ #define VLCD_2_78 (4<<1) /* VLCD = 2.78V */ #define VLCD_2_84 (5<<1) /* VLCD = 2.84V */ #define VLCD_2_90 (6<<1) /* VLCD = 2.90V */ #define VLCD_2_96 (7<<1) /* VLCD = 2.96V */ #define VLCD_3_02 (8<<1) /* VLCD = 3.02V */ #define VLCD_3_08 (9<<1) /* VLCD = 3.08V */ #define VLCD_3_14 (10<<1) /* VLCD = 3.14V */ #define VLCD_3_20 (11<<1) /* VLCD = 3.20V */ #define VLCD_3_26 (12<<1) /* VLCD = 3.26V */ #define VLCD_3_32 (12<<1) /* VLCD = 3.32V */ #define VLCD_3_38 (13<<1) /* VLCD = 3.38V */ #define VLCD_3_44 (15<<1) /* VLCD = 3.44V */ #define LCDMEM_ (0x0091) /* LCD Memory */ #ifdef __ASM_HEADER__ #define LCDMEM (LCDMEM_) /* LCD Memory (for assembler) */ #else #define LCDMEM ((char*) LCDMEM_) /* LCD Memory (for C) */ #endif SFR_8BIT(LCDM1); /* LCD Memory 1 */ SFR_8BIT(LCDM2); /* LCD Memory 2 */ SFR_8BIT(LCDM3); /* LCD Memory 3 */ SFR_8BIT(LCDM4); /* LCD Memory 4 */ SFR_8BIT(LCDM5); /* LCD Memory 5 */ SFR_8BIT(LCDM6); /* LCD Memory 6 */ SFR_8BIT(LCDM7); /* LCD Memory 7 */ SFR_8BIT(LCDM8); /* LCD Memory 8 */ SFR_8BIT(LCDM9); /* LCD Memory 9 */ SFR_8BIT(LCDM10); /* LCD Memory 10 */ SFR_8BIT(LCDM11); /* LCD Memory 11 */ SFR_8BIT(LCDM12); /* LCD Memory 12 */ SFR_8BIT(LCDM13); /* LCD Memory 13 */ SFR_8BIT(LCDM14); /* LCD Memory 14 */ SFR_8BIT(LCDM15); /* LCD Memory 15 */ SFR_8BIT(LCDM16); /* LCD Memory 16 */ SFR_8BIT(LCDM17); /* LCD Memory 17 */ SFR_8BIT(LCDM18); /* LCD Memory 18 */ SFR_8BIT(LCDM19); /* LCD Memory 19 */ SFR_8BIT(LCDM20); /* LCD Memory 20 */ #define LCDMA (LCDM10) /* LCD Memory A */ #define LCDMB (LCDM11) /* LCD Memory B */ #define LCDMC (LCDM12) /* LCD Memory C */ #define LCDMD (LCDM13) /* LCD Memory D */ #define LCDME (LCDM14) /* LCD Memory E */ #define LCDMF (LCDM15) /* LCD Memory F */ /************************************************************ * Timer A3 ************************************************************/ #define __MSP430_HAS_TA3__ /* Definition to show that Module is available */ SFR_16BIT(TAIV); /* Timer A Interrupt Vector Word */ SFR_16BIT(TACTL); /* Timer A Control */ SFR_16BIT(TACCTL0); /* Timer A Capture/Compare Control 0 */ SFR_16BIT(TACCTL1); /* Timer A Capture/Compare Control 1 */ SFR_16BIT(TACCTL2); /* Timer A Capture/Compare Control 2 */ SFR_16BIT(TAR); /* Timer A Counter Register */ SFR_16BIT(TACCR0); /* Timer A Capture/Compare 0 */ SFR_16BIT(TACCR1); /* Timer A Capture/Compare 1 */ SFR_16BIT(TACCR2); /* Timer A Capture/Compare 2 */ /* Alternate register names */ #define CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */ #define CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */ #define CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */ #define CCR0 TACCR0 /* Timer A Capture/Compare 0 */ #define CCR1 TACCR1 /* Timer A Capture/Compare 1 */ #define CCR2 TACCR2 /* Timer A Capture/Compare 2 */ #define CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */ #define CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */ #define CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */ #define CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */ #define CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */ #define CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */ /* Alternate register names - 5xx style */ #define TA0IV TAIV /* Timer A Interrupt Vector Word */ #define TA0CTL TACTL /* Timer A Control */ #define TA0CCTL0 TACCTL0 /* Timer A Capture/Compare Control 0 */ #define TA0CCTL1 TACCTL1 /* Timer A Capture/Compare Control 1 */ #define TA0CCTL2 TACCTL2 /* Timer A Capture/Compare Control 2 */ #define TA0R TAR /* Timer A Counter Register */ #define TA0CCR0 TACCR0 /* Timer A Capture/Compare 0 */ #define TA0CCR1 TACCR1 /* Timer A Capture/Compare 1 */ #define TA0CCR2 TACCR2 /* Timer A Capture/Compare 2 */ #define TA0IV_ TAIV_ /* Timer A Interrupt Vector Word */ #define TA0CTL_ TACTL_ /* Timer A Control */ #define TA0CCTL0_ TACCTL0_ /* Timer A Capture/Compare Control 0 */ #define TA0CCTL1_ TACCTL1_ /* Timer A Capture/Compare Control 1 */ #define TA0CCTL2_ TACCTL2_ /* Timer A Capture/Compare Control 2 */ #define TA0R_ TAR_ /* Timer A Counter Register */ #define TA0CCR0_ TACCR0_ /* Timer A Capture/Compare 0 */ #define TA0CCR1_ TACCR1_ /* Timer A Capture/Compare 1 */ #define TA0CCR2_ TACCR2_ /* Timer A Capture/Compare 2 */ #define TASSEL1 (0x0200) /* Timer A clock source select 0 */ #define TASSEL0 (0x0100) /* Timer A clock source select 1 */ #define ID1 (0x0080) /* Timer A clock input divider 1 */ #define ID0 (0x0040) /* Timer A clock input divider 0 */ #define MC1 (0x0020) /* Timer A mode control 1 */ #define MC0 (0x0010) /* Timer A mode control 0 */ #define TACLR (0x0004) /* Timer A counter clear */ #define TAIE (0x0002) /* Timer A counter interrupt enable */ #define TAIFG (0x0001) /* Timer A counter interrupt flag */ #define MC_0 (0*0x10u) /* Timer A mode control: 0 - Stop */ #define MC_1 (1*0x10u) /* Timer A mode control: 1 - Up to CCR0 */ #define MC_2 (2*0x10u) /* Timer A mode control: 2 - Continous up */ #define MC_3 (3*0x10u) /* Timer A mode control: 3 - Up/Down */ #define ID_0 (0*0x40u) /* Timer A input divider: 0 - /1 */ #define ID_1 (1*0x40u) /* Timer A input divider: 1 - /2 */ #define ID_2 (2*0x40u) /* Timer A input divider: 2 - /4 */ #define ID_3 (3*0x40u) /* Timer A input divider: 3 - /8 */ #define TASSEL_0 (0*0x100u) /* Timer A clock source select: 0 - TACLK */ #define TASSEL_1 (1*0x100u) /* Timer A clock source select: 1 - ACLK */ #define TASSEL_2 (2*0x100u) /* Timer A clock source select: 2 - SMCLK */ #define TASSEL_3 (3*0x100u) /* Timer A clock source select: 3 - INCLK */ #define CM1 (0x8000) /* Capture mode 1 */ #define CM0 (0x4000) /* Capture mode 0 */ #define CCIS1 (0x2000) /* Capture input select 1 */ #define CCIS0 (0x1000) /* Capture input select 0 */ #define SCS (0x0800) /* Capture sychronize */ #define SCCI (0x0400) /* Latched capture signal (read) */ #define CAP (0x0100) /* Capture mode: 1 /Compare mode : 0 */ #define OUTMOD2 (0x0080) /* Output mode 2 */ #define OUTMOD1 (0x0040) /* Output mode 1 */ #define OUTMOD0 (0x0020) /* Output mode 0 */ #define CCIE (0x0010) /* Capture/compare interrupt enable */ #define CCI (0x0008) /* Capture input signal (read) */ #define OUT (0x0004) /* PWM Output signal if output mode 0 */ #define COV (0x0002) /* Capture/compare overflow flag */ #define CCIFG (0x0001) /* Capture/compare interrupt flag */ #define OUTMOD_0 (0*0x20u) /* PWM output mode: 0 - output only */ #define OUTMOD_1 (1*0x20u) /* PWM output mode: 1 - set */ #define OUTMOD_2 (2*0x20u) /* PWM output mode: 2 - PWM toggle/reset */ #define OUTMOD_3 (3*0x20u) /* PWM output mode: 3 - PWM set/reset */ #define OUTMOD_4 (4*0x20u) /* PWM output mode: 4 - toggle */ #define OUTMOD_5 (5*0x20u) /* PWM output mode: 5 - Reset */ #define OUTMOD_6 (6*0x20u) /* PWM output mode: 6 - PWM toggle/set */ #define OUTMOD_7 (7*0x20u) /* PWM output mode: 7 - PWM reset/set */ #define CCIS_0 (0*0x1000u) /* Capture input select: 0 - CCIxA */ #define CCIS_1 (1*0x1000u) /* Capture input select: 1 - CCIxB */ #define CCIS_2 (2*0x1000u) /* Capture input select: 2 - GND */ #define CCIS_3 (3*0x1000u) /* Capture input select: 3 - Vcc */ #define CM_0 (0*0x4000u) /* Capture mode: 0 - disabled */ #define CM_1 (1*0x4000u) /* Capture mode: 1 - pos. edge */ #define CM_2 (2*0x4000u) /* Capture mode: 1 - neg. edge */ #define CM_3 (3*0x4000u) /* Capture mode: 1 - both edges */ /* TA3IV Definitions */ #define TAIV_NONE (0x0000) /* No Interrupt pending */ #define TAIV_TACCR1 (0x0002) /* TACCR1_CCIFG */ #define TAIV_TACCR2 (0x0004) /* TACCR2_CCIFG */ #define TAIV_6 (0x0006) /* Reserved */ #define TAIV_8 (0x0008) /* Reserved */ #define TAIV_TAIFG (0x000A) /* TAIFG */ /************************************************************* * Flash Memory *************************************************************/ #define __MSP430_HAS_FLASH__ /* Definition to show that Module is available */ SFR_16BIT(FCTL1); /* FLASH Control 1 */ SFR_16BIT(FCTL2); /* FLASH Control 2 */ SFR_16BIT(FCTL3); /* FLASH Control 3 */ #define FRKEY (0x9600) /* Flash key returned by read */ #define FWKEY (0xA500) /* Flash key for write */ #define FXKEY (0x3300) /* for use with XOR instruction */ #define ERASE (0x0002) /* Enable bit for Flash segment erase */ #define MERAS (0x0004) /* Enable bit for Flash mass erase */ #define WRT (0x0040) /* Enable bit for Flash write */ #define BLKWRT (0x0080) /* Enable bit for Flash segment write */ #define SEGWRT (0x0080) /* old definition */ /* Enable bit for Flash segment write */ #define FN0 (0x0001) /* Divide Flash clock by 1 to 64 using FN0 to FN5 according to: */ #define FN1 (0x0002) /* 32*FN5 + 16*FN4 + 8*FN3 + 4*FN2 + 2*FN1 + FN0 + 1 */ #ifndef FN2 #define FN2 (0x0004) #endif #ifndef FN3 #define FN3 (0x0008) #endif #ifndef FN4 #define FN4 (0x0010) #endif #define FN5 (0x0020) #define FSSEL0 (0x0040) /* Flash clock select 0 */ /* to distinguish from USART SSELx */ #define FSSEL1 (0x0080) /* Flash clock select 1 */ #define FSSEL_0 (0x0000) /* Flash clock select: 0 - ACLK */ #define FSSEL_1 (0x0040) /* Flash clock select: 1 - MCLK */ #define FSSEL_2 (0x0080) /* Flash clock select: 2 - SMCLK */ #define FSSEL_3 (0x00C0) /* Flash clock select: 3 - SMCLK */ #define BUSY (0x0001) /* Flash busy: 1 */ #define KEYV (0x0002) /* Flash Key violation flag */ #define ACCVIFG (0x0004) /* Flash Access violation flag */ #define WAIT (0x0008) /* Wait flag for segment write */ #define LOCK (0x0010) /* Lock bit: 1 - Flash is locked (read only) */ #define EMEX (0x0020) /* Flash Emergency Exit */ /************************************************************ * SD16_A1 - Sigma Delta 16 Bit ************************************************************/ #define __MSP430_HAS_SD16_A1__ /* Definition to show that Module is available */ SFR_8BIT(SD16INCTL0); /* SD16 Input Control Register Channel 0 */ SFR_8BIT(SD16AE); /* SD16 Analog Input Enable Register */ SFR_8BIT(SD16CONF0); /* SD16 Internal Configuration Register 0 */ SFR_8BIT(SD16CONF1); /* SD16 Internal Configuration Register 1 */ /* Please use only the recommended settings */ SFR_16BIT(SD16CTL); /* Sigma Delta ADC 16 Control Register */ SFR_16BIT(SD16CCTL0); /* SD16 Channel 0 Control Register */ SFR_16BIT(SD16IV); /* SD16 Interrupt Vector Register */ SFR_16BIT(SD16MEM0); /* SD16 Channel 0 Conversion Memory */ /* SD16AE */ #define SD16AE0 (0x0001) /* SD16 External Input Enable 0 */ #define SD16AE1 (0x0002) /* SD16 External Input Enable 1 */ #define SD16AE2 (0x0004) /* SD16 External Input Enable 2 */ #define SD16AE3 (0x0008) /* SD16 External Input Enable 3 */ #define SD16AE4 (0x0010) /* SD16 External Input Enable 4 */ #define SD16AE5 (0x0020) /* SD16 External Input Enable 5 */ #define SD16AE6 (0x0040) /* SD16 External Input Enable 6 */ #define SD16AE7 (0x0080) /* SD16 External Input Enable 7 */ /* SD16INCTLx */ #define SD16INCH0 (0x0001) /* SD16 Input Channel select 0 */ #define SD16INCH1 (0x0002) /* SD16 Input Channel select 1 */ #define SD16INCH2 (0x0004) /* SD16 Input Channel select 2 */ #define SD16GAIN0 (0x0008) /* SD16 Input Pre-Amplifier Gain Select 0 */ #define SD16GAIN1 (0x0010) /* SD16 Input Pre-Amplifier Gain Select 1 */ #define SD16GAIN2 (0x0020) /* SD16 Input Pre-Amplifier Gain Select 2 */ #define SD16INTDLY0 (0x0040) /* SD16 Interrupt Delay after 1.Conversion 0 */ #define SD16INTDLY1 (0x0080) /* SD16 Interrupt Delay after 1.Conversion 1 */ #define SD16GAIN_1 (0x0000) /* SD16 Input Pre-Amplifier Gain Select *1 */ #define SD16GAIN_2 (0x0008) /* SD16 Input Pre-Amplifier Gain Select *2 */ #define SD16GAIN_4 (0x0010) /* SD16 Input Pre-Amplifier Gain Select *4 */ #define SD16GAIN_8 (0x0018) /* SD16 Input Pre-Amplifier Gain Select *8 */ #define SD16GAIN_16 (0x0020) /* SD16 Input Pre-Amplifier Gain Select *16 */ #define SD16GAIN_32 (0x0028) /* SD16 Input Pre-Amplifier Gain Select *32 */ #define SD16INCH_0 (0x0000) /* SD16 Input Channel select A0 */ #define SD16INCH_1 (0x0001) /* SD16 Input Channel select A1 */ #define SD16INCH_2 (0x0002) /* SD16 Input Channel select A2 */ #define SD16INCH_3 (0x0003) /* SD16 Input Channel select A3 */ #define SD16INCH_4 (0x0004) /* SD16 Input Channel select A4 */ #define SD16INCH_5 (0x0005) /* SD16 Input Channel select Vcc divider */ #define SD16INCH_6 (0x0006) /* SD16 Input Channel select Temp */ #define SD16INCH_7 (0x0007) /* SD16 Input Channel select Offset */ #define SD16INTDLY_0 (0x0000) /* SD16 Interrupt Delay: Int. after 4.Conversion */ #define SD16INTDLY_1 (0x0040) /* SD16 Interrupt Delay: Int. after 3.Conversion */ #define SD16INTDLY_2 (0x0080) /* SD16 Interrupt Delay: Int. after 2.Conversion */ #define SD16INTDLY_3 (0x00C0) /* SD16 Interrupt Delay: Int. after 1.Conversion */ /* SD16CTL */ #define SD16OVIE (0x0002) /* SD16 Overflow Interupt Enable */ #define SD16REFON (0x0004) /* SD16 Switch internal Reference on */ #define SD16VMIDON (0x0008) /* SD16 Switch Vmid Buffer on */ #define SD16SSEL0 (0x0010) /* SD16 Clock Source Select 0 */ #define SD16SSEL1 (0x0020) /* SD16 Clock Source Select 1 */ #define SD16DIV0 (0x0040) /* SD16 Clock Divider Select 0 */ #define SD16DIV1 (0x0080) /* SD16 Clock Divider Select 1 */ #define SD16LP (0x0100) /* SD16 Low Power Mode Enable */ #define SD16XDIV0 (0x0200) /* SD16 2.Clock Divider Select 0 */ #define SD16XDIV1 (0x0400) /* SD16 2.Clock Divider Select 1 */ //#define SD16XDIV2 (0x0800) /* SD16 2.Clock Divider Select 2 */ #define SD16DIV_0 (0x0000) /* SD16 Clock Divider Select /1 */ #define SD16DIV_1 (SD16DIV0) /* SD16 Clock Divider Select /2 */ #define SD16DIV_2 (SD16DIV1) /* SD16 Clock Divider Select /4 */ #define SD16DIV_3 (SD16DIV0+SD16DIV1) /* SD16 Clock Divider Select /8 */ #define SD16XDIV_0 (0x0000) /* SD16 2.Clock Divider Select /1 */ #define SD16XDIV_1 (SD16XDIV0) /* SD16 2.Clock Divider Select /3 */ #define SD16XDIV_2 (SD16XDIV1) /* SD16 2.Clock Divider Select /16 */ #define SD16XDIV_3 (SD16XDIV0+SD16XDIV1) /* SD16 2.Clock Divider Select /48 */ #define SD16SSEL_0 (0x0000) /* SD16 Clock Source Select MCLK */ #define SD16SSEL_1 (SD16SSEL0) /* SD16 Clock Source Select SMCLK */ #define SD16SSEL_2 (SD16SSEL1) /* SD16 Clock Source Select ACLK */ #define SD16SSEL_3 (SD16SSEL0+SD16SSEL1) /* SD16 Clock Source Select TACLK */ /* SD16CCTLx */ //#define RESERVED (0x0001) /* RESERVED */ #define SD16SC (0x0002) /* SD16 Start Conversion */ #define SD16IFG (0x0004) /* SD16 Channel x Interrupt Flag */ #define SD16IE (0x0008) /* SD16 Channel x Interrupt Enable */ #define SD16DF (0x0010) /* SD16 Channel x Data Format: 0:Unipolar/1:Bipolar */ #define SD16OVIFG (0x0020) /* SD16 Channel x Overflow Interrupt Flag */ #define SD16LSBACC (0x0040) /* SD16 Channel x Access LSB of ADC */ #define SD16LSBTOG (0x0080) /* SD16 Channel x Toggle LSB Output of ADC */ #define SD16OSR0 (0x0100) /* SD16 Channel x OverSampling Ratio 0 */ #define SD16OSR1 (0x0200) /* SD16 Channel x OverSampling Ratio 1 */ #define SD16SNGL (0x0400) /* SD16 Channel x Single Conversion On/Off */ #define SD16XOSR (0x0800) /* SD16 Channel x Extended OverSampling Ratio */ #define SD16UNI (0x1000) /* SD16 Channel x Bipolar(0) / Unipolar(1) Mode */ #define SD16BUF0 (0x2000) /* SD16 Channel x High Impedance Input Buffer Select: 0 */ #define SD16BUF1 (0x4000) /* SD16 Channel x High Impedance Input Buffer Select: 1 */ #define SD16OSR_1024 (SD16OSR0+SD16XOSR) /* SD16 Channel x OverSampling Ratio 1024 */ #define SD16OSR_512 (SD16XOSR) /* SD16 Channel x OverSampling Ratio 512 */ #define SD16OSR_256 (0x0000) /* SD16 Channel x OverSampling Ratio 256 */ #define SD16OSR_128 (SD16OSR0) /* SD16 Channel x OverSampling Ratio 128 */ #define SD16OSR_64 (SD16OSR1) /* SD16 Channel x OverSampling Ratio 64 */ #define SD16OSR_32 (SD16OSR0+SD16OSR1) /* SD16 Channel x OverSampling Ratio 32 */ #define SD16BUF_0 (0x0000) /* SD16 High Imp. Input Buffer: Disabled */ #define SD16BUF_1 (SD16BUF0) /* SD16 High Imp. Input Buffer: Slow */ #define SD16BUF_2 (SD16BUF1) /* SD16 High Imp. Input Buffer: Meduim */ #define SD16BUF_3 (SD16BUF0+SD16BUF1) /* SD16 High Imp. Input Buffer: Fast */ /* SD16IV Definitions */ #define SD16IV_NONE (0x0000) /* No Interrupt pending */ #define SD16IV_SD16OVIFG (0x0002) /* SD16OVIFG */ #define SD16IV_SD16MEM0 (0x0004) /* SD16MEM0 SD16IFG */ /************************************************************ * DAC12 ************************************************************/ #define __MSP430_HAS_DAC12_1__ /* Definition to show that Module is available */ SFR_16BIT(DAC12_0CTL); /* DAC12_0 Control */ #define DAC12GRP (0x0001) /* DAC12 group (not used) */ #define DAC12ENC (0x0002) /* DAC12 enable conversion */ #define DAC12IFG (0x0004) /* DAC12 interrupt flag */ #define DAC12IE (0x0008) /* DAC12 interrupt enable */ #define DAC12DF (0x0010) /* DAC12 data format */ #define DAC12AMP0 (0x0020) /* DAC12 amplifier bit 0 */ #define DAC12AMP1 (0x0040) /* DAC12 amplifier bit 1 */ #define DAC12AMP2 (0x0080) /* DAC12 amplifier bit 2 */ #define DAC12IR (0x0100) /* DAC12 input reference and output range */ #define DAC12CALON (0x0200) /* DAC12 calibration */ #define DAC12LSEL0 (0x0400) /* DAC12 load select bit 0 */ #define DAC12LSEL1 (0x0800) /* DAC12 load select bit 1 */ #define DAC12RES (0x1000) /* DAC12 resolution */ #define DAC12SREF0 (0x2000) /* DAC12 reference bit 0 */ #define DAC12SREF1 (0x4000) /* DAC12 reference bit 1 */ #define DAC12OPS (0x8000) /* DAC12 Operation Amp. */ #define DAC12AMP_0 (0*0x0020u) /* DAC12 amplifier 0: off, 3-state */ #define DAC12AMP_1 (1*0x0020u) /* DAC12 amplifier 1: off, off */ #define DAC12AMP_2 (2*0x0020u) /* DAC12 amplifier 2: low, low */ #define DAC12AMP_3 (3*0x0020u) /* DAC12 amplifier 3: low, medium */ #define DAC12AMP_4 (4*0x0020u) /* DAC12 amplifier 4: low, high */ #define DAC12AMP_5 (5*0x0020u) /* DAC12 amplifier 5: medium, medium */ #define DAC12AMP_6 (6*0x0020u) /* DAC12 amplifier 6: medium, high */ #define DAC12AMP_7 (7*0x0020u) /* DAC12 amplifier 7: high, high */ #define DAC12LSEL_0 (0*0x0400u) /* DAC12 load select 0: direct */ #define DAC12LSEL_1 (1*0x0400u) /* DAC12 load select 1: latched with DAT */ #define DAC12LSEL_2 (2*0x0400u) /* DAC12 load select 2: latched with pos. Timer_A3.OUT1 */ #define DAC12LSEL_3 (3*0x0400u) /* DAC12 load select 3: latched with pos. Timer_B7.OUT1 */ #define DAC12SREF_0 (0*0x2000u) /* DAC12 reference 0: Vref+ */ #define DAC12SREF_1 (1*0x2000u) /* DAC12 reference 1: Vref+ */ #define DAC12SREF_2 (2*0x2000u) /* DAC12 reference 2: Veref+ */ #define DAC12SREF_3 (3*0x2000u) /* DAC12 reference 3: Veref+ */ SFR_16BIT(DAC12_0DAT); /* DAC12_0 Data */ /************************************************************ * Interrupt Vectors (offset from 0xFFE0) ************************************************************/ #define VECTOR_NAME(name) name##_ptr #define EMIT_PRAGMA(x) _Pragma(#x) #define CREATE_VECTOR(name) void (* const VECTOR_NAME(name))(void) = &name #define PLACE_VECTOR(vector,section) EMIT_PRAGMA(DATA_SECTION(vector,section)) #define ISR_VECTOR(func,offset) CREATE_VECTOR(func); \ PLACE_VECTOR(VECTOR_NAME(func), offset) #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define BASICTIMER_VECTOR ".int00" /* 0xFFE0 Basic Timer */ #else #define BASICTIMER_VECTOR (0 * 1u) /* 0xFFE0 Basic Timer */ /*#define BASICTIMER_ISR(func) ISR_VECTOR(func, ".int00") */ /* 0xFFE0 Basic Timer */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define PORT2_VECTOR ".int01" /* 0xFFE2 Port 2 */ #else #define PORT2_VECTOR (1 * 1u) /* 0xFFE2 Port 2 */ /*#define PORT2_ISR(func) ISR_VECTOR(func, ".int01") */ /* 0xFFE2 Port 2 */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define DAC12_VECTOR ".int03" /* 0xFFE6 DAC 12 */ #else #define DAC12_VECTOR (3 * 1u) /* 0xFFE6 DAC 12 */ /*#define DAC12_ISR(func) ISR_VECTOR(func, ".int03") */ /* 0xFFE6 DAC 12 */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define PORT1_VECTOR ".int04" /* 0xFFE8 Port 1 */ #else #define PORT1_VECTOR (4 * 1u) /* 0xFFE8 Port 1 */ /*#define PORT1_ISR(func) ISR_VECTOR(func, ".int04") */ /* 0xFFE8 Port 1 */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define TIMERA1_VECTOR ".int05" /* 0xFFEA Timer A CC1-2, TA */ #else #define TIMERA1_VECTOR (5 * 1u) /* 0xFFEA Timer A CC1-2, TA */ /*#define TIMERA1_ISR(func) ISR_VECTOR(func, ".int05") */ /* 0xFFEA Timer A CC1-2, TA */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define TIMERA0_VECTOR ".int06" /* 0xFFEC Timer A CC0 */ #else #define TIMERA0_VECTOR (6 * 1u) /* 0xFFEC Timer A CC0 */ /*#define TIMERA0_ISR(func) ISR_VECTOR(func, ".int06") */ /* 0xFFEC Timer A CC0 */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define WDT_VECTOR ".int10" /* 0xFFF4 Watchdog Timer */ #else #define WDT_VECTOR (10 * 1u) /* 0xFFF4 Watchdog Timer */ /*#define WDT_ISR(func) ISR_VECTOR(func, ".int10") */ /* 0xFFF4 Watchdog Timer */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define SD16_VECTOR ".int12" /* 0xFFF8 Sigma Delta ADC */ #else #define SD16_VECTOR (12 * 1u) /* 0xFFF8 Sigma Delta ADC */ /*#define SD16_ISR(func) ISR_VECTOR(func, ".int12") */ /* 0xFFF8 Sigma Delta ADC */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define NMI_VECTOR ".int14" /* 0xFFFC Non-maskable */ #else #define NMI_VECTOR (14 * 1u) /* 0xFFFC Non-maskable */ /*#define NMI_ISR(func) ISR_VECTOR(func, ".int14") */ /* 0xFFFC Non-maskable */ /* CCE V2 Style */ #endif #ifdef __ASM_HEADER__ /* Begin #defines for assembler */ #define RESET_VECTOR ".reset" /* 0xFFFE Reset [Highest Priority] */ #else #define RESET_VECTOR (15 * 1u) /* 0xFFFE Reset [Highest Priority] */ /*#define RESET_ISR(func) ISR_VECTOR(func, ".int15") */ /* 0xFFFE Reset [Highest Priority] */ /* CCE V2 Style */ #endif /************************************************************ * End of Modules ************************************************************/ #ifdef __cplusplus } #endif /* extern "C" */ #endif /* #ifndef __msp430x42x0 */